PDA

View Full Version : TD05 16G on SR20DET question


Taisan_Advan
08-29-2018, 01:39 PM
I have TD05 16G with manifold and downpipe to fit SR20. The question I have is will the engine run if I’ll run it on stock boost (7psi) without a tune?

nisileighty
08-29-2018, 01:42 PM
It’ll run, will eventually need a tune


Sent from my iPhone using Tapatalk

TheRealSy90
08-29-2018, 05:08 PM
It will start, idle, and run fine. You're going to want to get it tuned to drive in boost safely.


Also, stock s13 sr20det boost pressure is variable between 10-12psi via the factory boost pressure solenoid. Wastegate pressure is 7psi.

nisileighty
08-29-2018, 05:09 PM
Also, stock s13 sr20det boost pressure is variable between 10-12psi via the factory boost pressure solenoid. Wastegate pressure is 7psi.



Most people seem to not understand this.

Taisan_Advan
08-29-2018, 08:28 PM
It will start, idle, and run fine. You're going to want to get it tuned to drive in boost safely.


Also, stock s13 sr20det boost pressure is variable between 10-12psi via the factory boost pressure solenoid. Wastegate pressure is 7psi.

Thanks, that exactly what I needed to hear. I guess I’ll ride stock for now.