PDA

View Full Version : RB25DET Series 2 A/C Compressor or not?


BlacknboostedS13
06-14-2012, 09:46 AM
I purchased a series 2 RB25 a few months ago and have been slowly freshening it up before the drop in. I've decided I wanted to use A/C because it gets hot as shit in FL and this will be my DD. The problem is, The motorset didn't come with the A/C line ends, so I went out and bought some from another s2... They don't fit... The I.D. of the low and high pressure sides are 2-3 mm bigger on the compressor than the O.D. of the lines... I searched the forums and googled the part numbers and only came up with 1 legible australian thread on it but no answers and a few others in Japanese? I'm hoping either you guys can help and know what lines will fit this or can read Japanese to tell me wtf they were sayin...

BTW: I already contacted Nissan with the part number, they had no idea as it was showing that it wasn't from the US.

http://i12.photobucket.com/albums/a225/biosythe/photo1-1.jpg

http://i12.photobucket.com/albums/a225/biosythe/photo2-1.jpg

http://i12.photobucket.com/albums/a225/biosythe/photo3-1.jpg

Sileighty_85
06-14-2012, 10:08 AM
that is a series 2 Comp, but those lines might not be

BlacknboostedS13
06-14-2012, 10:16 AM
I bought the lines from JDMTech in Orlando and they said they got them off of an s2, I guess they could be lying. I guess my hunt continues.

Sileighty_85
06-14-2012, 11:23 AM
Most import companies dont know exactly what the engine came out of.

The Rb25 came is quiet a few other chassis other than the R33 and they look exactly the same minus some small parts

KendallH
06-14-2012, 02:18 PM
I have an s2 compressor with line ends bolted on, if you can't get it to work.

feito
06-14-2012, 07:27 PM
series 2 in s14, custom lines:
high pressure line's welded 1 1/2" after the hose by the service port, the rest came with the engine which is from an r33, at least they told me...
low pressure one, well you can see the welds where its all shiny, hope this helps
http://i1081.photobucket.com/albums/j341/andres14oj/IMG_20111112_173013.jpg

MR_GUTTI
12-26-2012, 12:23 PM
series 2 in s14, custom lines:
high pressure line's welded 1 1/2" after the hose by the service port, the rest came with the engine which is from an r33, at least they told me...
low pressure one, well you can see the welds where its all shiny, hope this helps
http://i1081.photobucket.com/albums/j341/andres14oj/IMG_20111112_173013.jpg

So u used rb25 fitting on s14 lines?

supersayianjim
08-10-2016, 11:36 AM
bump, as I'm encountering this issue now!!