PDA

View Full Version : plz help ka24de wont start no spark


philjk2007
02-18-2011, 01:54 PM
ok so the other day after i had put on a headgasket a week ago i noticed my on on light was coming on so i decided to just change the oil pressure sensor now the car wont start i have no spark the car was working fine before i put the sensor ive change the coil resently along with the rotor, and cap the dizzy i good cause im getting fuel in all cylinders just no spark, i tested the coil , primary has 1.0 ohms and the secondary has 12.5 k ohms so its seems to in spec. could it be my ignitor chip plz help need asap :bowdown:

philjk2007
02-20-2011, 08:08 AM
no help thanks guys noone has any ideas

c-los13
02-20-2011, 10:05 AM
retrace your step
im sure nobody can see how change a oil sensor could mess everything up
maybe you pulled something else
good luck

k.man
02-20-2011, 10:18 AM
check all your fuses, maybe your starter fuse went or somethign along those lines

spartanmisfit
02-20-2011, 10:34 AM
is it cranking? Does it sputter or anything?

philjk2007
02-23-2011, 05:57 AM
cracks really strong but no spark

philjk2007
02-23-2011, 05:58 AM
no sputter no pops nothing

A.w/o.l.
02-27-2011, 05:00 PM
dam im getting the same shit my guess was sumthin electrical so i pulled my body and engine harness to make sure theres no cuts and to my surprise there was mainly on the plugs that went to my dizzy

philjk2007
02-27-2011, 07:16 PM
found it i need a dizzy wft they cost so much