sr20 no start. Not sure what the problem is.

[Goose]

I've got an s13 coupe with a blacktop sr20 in it. Car has been running fine until last night it wouldn't start. Cranked it for a while and tried a few different things and no dice. Pulled the fuel pump fuse and cranked it just in case it was flooded and it started right up, put the fuse back in and it drove normal all the way home. Now it wont start unless you pull the fuel pump fuse and crank it a few times then replace the fuse and it runs. I don't want to drive it until I know what the problem is and I'm stumped. Thanks for your help!

Quick info about car:

fmic
stock t25
3 inch turbo back
koyo radiator
hks turbo timer

Help a 240 newb out!

[ka-t_180sx]

i have the same problem..lol if you find out how to fix it let me know.....thanks

[Bahdra]

omfg me too i just put my sr together and yesterday she was running but now its not
time line
put together sr
fired up
would not rev past 3k
tried fixing it (would run without maf even hooked up to 3k)
replaced maf wont start??? tf

I've take care of air so i need to check spark and fuel I'll let ya know

[ka-t_180sx]

can some one help us out....

[japslapsilvia]

maybe your injectors are leaking alittle bit causing u excess fuel in the combustion chamber??? take ur fuel rail out and turn the key to see if fuel is leaking past the o-rings.

[ka-t_180sx]

tried that....anybody had this problem.... need help asap wanna go drift...

[n240sxfnatic]

Could be a bad water temp sensor, Thats what mine did when it went bad

[Bahdra]

i replaced my plug now she purrs like a lioness but still wont rev past 3k and threw code 11 so now im on the hunt again... hmm

[ka-t_180sx]

come on people...help me out

[ka-t_180sx]

still havent figuerd out the problem...will pay some one to fix it

[ka-t_180sx]

its been 2 months theres gotta be someone that can help me out....

[aNskY]

think, what can make the ecu think it needs to dump fuel?

temp sensor
o2 sensor
etc..

[ka-t_180sx]

still have the same problem

[Monooxide]

Bahdra, YOU HAVE A BAD MAF. 100% Garaunteed.

OP, You need to make sure an injector isn't stuck/leaking. You need to check your temp sensors(not gauge ones).