SR2Zero
05-03-2008, 05:12 PM
Okay so here it goes... I've just came into possesion of a redtop sr, bought from somebody I knew, pretty good condition. Its got t25 still on it, basic bolt ons, megan mani, megan elbow, ect, didn't come with downpipe.
Basically, I'm going to upgrade to a gt2871r .64 ar, thought about full race t/s but decided against it due to the lack of a/c (which may or may not be put on but w/e :-/ )
To complement the turbo I've pretty much decided on...
Gt2871r Extrude honed
Tomei manifold (swain coated)
Circuit sports Elbow & Downpipe
Tomei 256/256 Poncams, some sort of spring/retainer combo.. brand not decided
Greddy Intake Manifold (Upgrade from my knock off, boo fake shiz)
Greddy V-SPL (Maybe HKS one, still debating)
Pipingpro Gt2871r intake
Z32 Maf
Tial BOV
Enthalpy Rom Tune
(Maybe a DEI CO2 Intercooler kit, not sure)
I'm going to do basic gasket replacement, waterpump, nismo thermostat, ect. Now, my question is to build or not to build... I want stock bore for sure. I just want a extremely reliable set up for 350-400 whp. Also, about manifold cracking, tomei + CS downpipe elbow combo should be ok? I've debated this against the use of a dp like megan with the flex. Not sure what to do about it.
I know its a book, but be expecting a full project thread, including all this + seam welding (I guess stiching) the entire car, and such.
Thanks for the time.
Basically, I'm going to upgrade to a gt2871r .64 ar, thought about full race t/s but decided against it due to the lack of a/c (which may or may not be put on but w/e :-/ )
To complement the turbo I've pretty much decided on...
Gt2871r Extrude honed
Tomei manifold (swain coated)
Circuit sports Elbow & Downpipe
Tomei 256/256 Poncams, some sort of spring/retainer combo.. brand not decided
Greddy Intake Manifold (Upgrade from my knock off, boo fake shiz)
Greddy V-SPL (Maybe HKS one, still debating)
Pipingpro Gt2871r intake
Z32 Maf
Tial BOV
Enthalpy Rom Tune
(Maybe a DEI CO2 Intercooler kit, not sure)
I'm going to do basic gasket replacement, waterpump, nismo thermostat, ect. Now, my question is to build or not to build... I want stock bore for sure. I just want a extremely reliable set up for 350-400 whp. Also, about manifold cracking, tomei + CS downpipe elbow combo should be ok? I've debated this against the use of a dp like megan with the flex. Not sure what to do about it.
I know its a book, but be expecting a full project thread, including all this + seam welding (I guess stiching) the entire car, and such.
Thanks for the time.