Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk

Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars


Reply
 
Thread Tools Display Modes
Old 06-10-2016, 08:33 PM   #1
jhollin9
 
jhollin9's Avatar
 
Join Date: Jul 2015
Location: Knoxville, TN
Age: 29
Posts: 5
Trader Rating: (0)
jhollin9 is an unknown quantity at this point
Feedback Score: 0 reviews
KA Single Jingle KA24E help needed

Okay I feel like an idiot here. Got this creamy grey two tone with a single cam that mixed fluids but ran great. Took the whole front off and fixed the mixing fluids but trying to put everything back together I'm having a hard time getting it running right again. I've checked the fuel spray and while cranking all four injectors fire simultaneously. It backfires through the intake and will not idle. Things I've tried: stabbed the oil pump/dizzy shaft 1000 times, bought new distributor, tried different ECU and most recently installed new harness as per forum searches.

Any suggestions or tests to perform are appreciated.
jhollin9 is offline   Reply With Quote
Sponsored Links
Old 06-10-2016, 08:41 PM   #2
lunchmeat
Zilvia Addict
 
lunchmeat's Avatar
 
Join Date: Apr 2016
Location: Southaven, ms
Age: 42
Posts: 951
Trader Rating: (0)
lunchmeat has a reputation beyond reputelunchmeat has a reputation beyond reputelunchmeat has a reputation beyond reputelunchmeat has a reputation beyond reputelunchmeat has a reputation beyond reputelunchmeat has a reputation beyond reputelunchmeat has a reputation beyond reputelunchmeat has a reputation beyond reputelunchmeat has a reputation beyond reputelunchmeat has a reputation beyond reputelunchmeat has a reputation beyond repute
Feedback Score: 0 reviews
Double check your timing. Did you mess with the timing chain?
lunchmeat is offline   Reply With Quote
Old 06-10-2016, 08:52 PM   #3
jhollin9
 
jhollin9's Avatar
 
Join Date: Jul 2015
Location: Knoxville, TN
Age: 29
Posts: 5
Trader Rating: (0)
jhollin9 is an unknown quantity at this point
Feedback Score: 0 reviews
Yes. The original problem of mixing fluids was the timing chain ate the slack side tensioner and ate through the timing cover where water passes through so I replaced all that. Triple checked the mechanical timing, plated links all in the right place when we put in together and checked cam position after turning it over a few times and resetting to TDC.
jhollin9 is offline   Reply With Quote
Old 06-14-2016, 04:13 PM   #4
jhollin9
 
jhollin9's Avatar
 
Join Date: Jul 2015
Location: Knoxville, TN
Age: 29
Posts: 5
Trader Rating: (0)
jhollin9 is an unknown quantity at this point
Feedback Score: 0 reviews
Yes I replaced the timing chain along with the timing cover and tensioners. I am confident in the mechanical timing. Used the plated links when setting it, checked three times and checked the cam position. About 90% confident in the spark timing, its a fucked way to set it in the first place but I can't get it running well enough to put a timing light on it to see if I'm way out. I've tested the fuel spray and maybe thats not the only issue but its wrong regardless. No idea how to fix it though.
jhollin9 is offline   Reply With Quote
Old 06-17-2016, 09:56 PM   #5
Alisaihin
 
Alisaihin's Avatar
 
Join Date: Dec 2014
Location: Iowa
Age: 28
Posts: 32
Trader Rating: (0)
Alisaihin is an unknown quantity at this point
Feedback Score: 0 reviews
Firing simultaneously, as in AT THE SAME TIME?
Alisaihin is offline   Reply With Quote
Old 06-18-2016, 06:25 AM   #6
jhollin9
 
jhollin9's Avatar
 
Join Date: Jul 2015
Location: Knoxville, TN
Age: 29
Posts: 5
Trader Rating: (0)
jhollin9 is an unknown quantity at this point
Feedback Score: 0 reviews
Yes as far as I know that's the only definition of simultaneously. Same time. All four pulsed together while cranking.
jhollin9 is offline   Reply With Quote
Old 06-18-2016, 07:15 AM   #7
Edixon
 
Join Date: May 2012
Location: Aiken, SC
Age: 34
Posts: 25
Trader Rating: (0)
Edixon is on a distinguished road
Feedback Score: 0 reviews
The injector pulse is normal according to the FSM (page EF&EC 17)...I seriously think that your oil pump is stabbed in a tooth off, I know you said you checked it. IIRC, with the distributor removed, the "D" shaped key should be at the 11-11:30 position.
Edixon is offline   Reply With Quote
Reply

Bookmarks

Tags
ka24e, s13


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 11:15 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™