Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk

Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars


Reply
 
Thread Tools Display Modes
Old 05-11-2014, 10:54 PM   #61
TerribleTopher
Leaky Injector
 
TerribleTopher's Avatar
 
Join Date: May 2011
Location: Charlotte, NC
Posts: 62
Trader Rating: (1)
TerribleTopher is an unknown quantity at this point
Feedback Score: 1 reviews
Quote:
Originally Posted by MIKE 34 View Post
Or how can I test it to make sure it's still works fine?
If you can hear it from inside the car it's energizing. If you're not getting any fuel to the rail either a line has to be clogged, a line is on incorrectly, the fuel pump isn't creating enough pressure, or maybe the polarity is reversed on the pump. Pressure testing the fuel system would be ideal but you could trace the lines back to find where the problem is.
TerribleTopher is offline   Reply With Quote
Sponsored Links
Old 05-23-2014, 12:09 PM   #62
MIKE 34
 
Join Date: Mar 2012
Location: Denver CO
Posts: 35
Trader Rating: (0)
MIKE 34 is an unknown quantity at this point
Feedback Score: 0 reviews
Quote:
Originally Posted by MIKE 34 View Post
Or how can I test it to make sure it's still works fine?
Ok so I figured out what was wrong with the fuel pump so I can hear it now and now there is fuel getting to the rail. The new problem is that the car starts when I use starting fluid but then it dies, it revs high but then it dies. Any ideas in what it might be?
MIKE 34 is offline   Reply With Quote
Old 05-28-2014, 06:52 PM   #63
MIKE 34
 
Join Date: Mar 2012
Location: Denver CO
Posts: 35
Trader Rating: (0)
MIKE 34 is an unknown quantity at this point
Feedback Score: 0 reviews
Ok update the car starts now!!! But.... It has a low rough idle. What I did was get injectors from a 93 Nissan Altima and it starts but the idle is low and rough and when I give it has it dies. I messed around with the distributer timing and the idle screw but nothing idle is still low and dies when I give it has any ideas in what it might be ?
MIKE 34 is offline   Reply With Quote
Old 05-10-2019, 10:44 PM   #64
Nubbs
 
Join Date: Apr 2019
Location: Virginia
Posts: 1
Trader Rating: (0)
Nubbs is an unknown quantity at this point
Feedback Score: 0 reviews
I’m trying to figure out a few things with my s13 coupe.

when the previous owner did the s14 ka swap, they didn’t install the PS lines from the rack to the pump/ reservoir. Pump is there though. Do the s13 ka lines mount up with the s14 ka no issue? Haven’t really been able to find any information on this. I would assume it’s all the same.

This is one of the last things I need to do before getting this thing back on the road!
Nubbs is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 03:56 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™