zo6 ls1 in a 240sx?

[dirty fast]

:D Hey guy I was wondering about how to tell if my car has an lsd in it buy looking at the vin or some other special feature on the car. The car is a 1996 se 240. And what gear ratio am I looking at in the rear end? I am dropping a zo6 vette motor into the car in two weeks. We did the math and the ls1 weighs 20-30 lbs. More than the stock motor and trans. I have the motor trans and every thing else. I am sure other people have done this swap. If any one has any info or pics of the ls1’s in 1995’s and up hook me up. I have some pars for sale for the 1995- and up cars so let me know. Thanks Jeffrey g

[infinitexsound]

:blah: :blah: :blah: :blah: :blah: :blah: :blah: :blah: :blah: :blah: :blah: :blah: :gives: :zzz: this is getting old

[AJ]

Aries <-- i think that was his nick did it. I'm quite possitive he swapped a lt1 though. Might want to get in contact with him if your serious.

[matlock]

I think you better put a wheelie bar on the car too and a parachute that would be cool, oh yeah and a "BADASS BOWTIE" decal would also spruce it up. If you are serious good luck.

[TheSnail]

If you got a "zo6" ls1 for your 240, I'm sure your would have seen pics of a ls1 in a 240 rather then requesting pics. I call BS until further proof.

[BlackZenkiS14]

Jack the car up and spin the tires. Either way though, i dont think that rear end wont handle 405+ WHP and TQ. THew rear gears are 4.08 's and like everyone else said, if your serious, good luck, and keep us updated.

[TheTicTac]

AWESOME! LS1 is the new SR20!!!

[MakotoS13]

FYI: there isn't a z06 in existence with an LS1.

you, sir, are an idiot. if you have to ask this crap then you shouldn't be doin the swap.

[Phlip]

I call troll, personally

[dirty fast]

Ok guys I got the motor for $2700, only because I know lots of people. I am going to be using a 700r automatic traney, and a b&m pro stick. The drive shaft we figured will cost about $150 to make. Getting the car wired will cost me $300. I plan on using edit ls1 for my computer program to fix any small check engine lights and if I plan to use turbos or nitrous. Yea I am very serious about doing this. I have seen two cars on the net that have done this swap. I figure you guys would know about more people who have done that kind of a swap. So the car has 4.10 gears? If any body is planning to be in the Panama City fl. Area you can stop buy and see it. :D

[raen419]

post pics.
we don't care about "updates"
we want pics.

hahaha

[nismo2491]

FYI: there isn't a z06 in existence with an LS1.

you, sir, are an idiot. if you have to ask this crap then you shouldn't be doin the swap.
damn you doug!!! beat me to it!

[North240]

Yeah i was just going to add that as well, You might want to fugure out what motor you have first, because you either have a LS1 from a c5 corvette (or a few other cars) OR a LS6 from the z06. Before you wire it up and start making driveshafts or running computer software its probably a good choice to know what the motor is dont you think? I have an odd feeling this swap isnt going to happen.

[dirty fast]

Ok for the people who just don’t get it I have an ls1 zo6 vette motor. The zo6 motor I have makes 405hp opposed to the stock style ls1. The difference is the heads cam and intake manifold. :goyou:

[dirty fast]

In my first post I asked if you guys new any quick way to tell if I have a limited slip differential in my car, not what motor I have. :tweak:

[North240]

Ok for the people who just don’t get it I have an ls1 zo6 vette motor. The zo6 motor I have makes 405hp opposed to the stock style ls1. The difference is the heads cam and intake manifold. :goyou:

THEN ITS NOT A LS1 ITS A LS6 Dont be an idiot :newbie: we're trying to help. Do you have ABS in the car, if you do then you have a VLSD if not then you dont, they came paired, question answered.

[justinhustle]

im currently droppin a viper engine into my rollerblades

ill post pics when the swap is done

[wootwoot]

hahahaha, I love it!!!

[drift freaq]

Do you have ABS in the car, if you do then you have a VLSD if not then you dont, they came paired, question answered.

No, actually they were not always paired, i.e. just because you have ABS does not mean you always have a VLSD. Seen lots of open diff. ABS cars.
back to the topic of........

[dirty fast]

I don’t have abs so that sucks. I can get a 91 300zx rear end would that be a good idea or should I leave it alone? :ugh:

[MakotoS13]

hey retard there is no such thing as an LS1 Z06 motor. there hasn't even been and never will be a Z06 with an LS1 powering it. you are a fool and a newb.

choke on sand, die, and i hope satan puts you between adolf hitler and ghandi.

[Pank]

Ok for the people who just don’t get it I have an ls1 zo6 vette motor. The zo6 motor I have makes 405hp opposed to the stock style ls1. The difference is the heads cam and intake manifold. :goyou:

hahahahahahahahhahhahahahaha

"nah man, I have a rb25det, but with .1 more liters displacement and another turbo!"


I call BS on everything. even the color of his car

[TheSparo]

makato, he could be talking about the Z06 type R w/ the supercharged turbo in it, that is the LsOne pimp ShiZZniT, I wIsH i hAd one of tHoSE!!!!!!!111!!ONE!!!!!11!!unooneune

[raen419]

this guy doesn't know what he has, if he even has it.
post pics
quit talking out of your ass.

otherwise, lock this bull shit.

[Jeff240sx]

So the car has 4.10 gears? If any body is planning to be in the Panama City fl. Area you can stop buy and see it. :D

Allright guy, the fucking 240sx has 4.086 gears. Not 4.10. Don't read 4.08 and then think 4.10. It's wrong. You asked what gears. Were told 4.08. Yet here you are. Stating 4.10. What the hell is wrong with you?

You're paying to get the wiring done? Lowballing the prices hardcore. Can't spell "tranny" correctly. BTW: What the fuck is a traney? Last night's date? Asking noob questions about something as assinine as a viscous limited slip, when all corvettes, the ones wtih the LS1 engine you've got are running are clutch type.

The LS1/LS6 differences include 1/2 a point of compression. And there are 2 versions of LS6 making different power.

Next up, the LS1 weighs 459 pounds. LS6 is 497. The tranny you list is another ~130. So, while the motor alone weighs what the KA + transmission combined weigh.. you're still an idiot that can't do math.

Go away. Really. Leave Zilvia. Play this game elsewhere. www.nicoclub.com won't give you shit for this type of idiocy.
-Jeff

[Dousan_PG]

^^
[claps slowly....and slowly increases speed]
[crowd goes crazy]

[ThatGuy]

You don't have to lie to try and make friends on Zilvia. However we do require you at least know what the fuck you're making up stories about. Get your facts straight before your next story. Learn the difference between a LT1, LT4, LS1, LS2, LS6, LS7, etc., before spewing more mindless bullshit here.

*edit* Damn Jeff beat me to it, with better info as well. :Ownedd:

[drift freaq]

^^
[claps slowly....and slowly increases speed]
[crowd goes crazy]
ditto!!!!!!!!!!!!!!!!!!!!

[NemeGuero]

the special moment clap... god I love it

[EchoOfSilence]

Damn, i was hoping this guy was actually knowledgable and doing it :wtc:

[raen419]

same here, but he blew it.
if he ever does come back (not likely...hahaha) maybe he'll prove he has all this shit that he doesn't know anything about.

[dirty fast]

Allright guy, the fucking 240sx has 4.086 gears. Not 4.10. Don't read 4.08 and then think 4.10. It's wrong. You asked what gears. Were told 4.08. Yet here you are. Stating 4.10. What the hell is wrong with you?

You're paying to get the wiring done? Lowballing the prices hardcore. Can't spell "tranny" correctly. BTW: What the fuck is a traney? Last night's date? Asking noob questions about something as assinine as a viscous limited slip, when all corvettes, the ones wtih the LS1 engine you've got are running are clutch type.

The LS1/LS6 differences include 1/2 a point of compression. And there are 2 versions of LS6 making different power.

Next up, the LS1 weighs 459 pounds. LS6 is 497. The tranny you list is another ~130. So, while the motor alone weighs what the KA + transmission combined weigh.. you're still an idiot that can't do math.

Go away. Really. Leave Zilvia. Play this game elsewhere. www.nicoclub.com won't give you shit for this type of idiocy.
-Jeff

hey if you have a fucking problem you can call me any time. your car will forever be a fucking pos and you will never have a real car becouse you cant aford to pay the insurance. when you and all of your fag four banger buddys get ready to race some real car come on up to pc. and lets race. you fucking wannabe. jeff240sx is a fucking fag :fawkd: :fawkd:

[ThatGuy]

Wow, you just called one of my fellow Moderators a fag and a wannabe. Goodbye! At least I won't have to worry about your dumbass trolling anymore and stirring up shit. I'd recommend not trying to come back under a different screen-name.

[Jeff240sx]

Done.
Now, lets analyze this post. You want me to call you. Yet don't leave a number. This shows alot towards your pussy nature. You make assinine statements about my car, when you are nearly the only one on zilvia who hasn't seen it and made a positive comment about it. You make miserable assumptions about my bank statements and inability to pay for insurance. You want a race now? Do you run 11s in your phantom ls1 z06 turbo 240sx? Even if you don't, there's one issue at hand. You think this situation can be solved by a race?
Me driving across the state to beat your imaginary car still won't help the fact you're a moron. That's what this situation is. It's not that you can beat me, or I'm an asshole. If you weren't an idiot, you obviously wouldn't post this trollish babble on my forum.
I'm the wannabe? Grow up. I've got 5,000 members easy who will refute that. What do you have? Your cock in your hand.
Please realize that you're now banned.
-Jeff

[Jeff240sx]

I don't normally do this.. but if anyone wants to inform our departed user of exactly how incorrect he was, you can contact him at:
[email protected]

Good luck with life, jeffrey.
-Jeff

[Var]

hey if you have a fucking problem you can call me any time. your car will forever be a fucking pos and you will never have a real car becouse you cant aford to pay the insurance. when you and all of your fag four banger buddys get ready to race some real car come on up to pc. and lets race. you fucking wannabe. jeff240sx is a fucking fag :fawkd: :fawkd:


I think Jeff is worthy of a more sophisticated insult than this. How dare he. This is just vulgarity. I'm going to be sick.

[nismo2491]

hey if you have a fucking problem you can call me any time. your car will forever be a fucking pos and you will never have a real car becouse you cant aford to pay the insurance. when you and all of your fag four banger buddys get ready to race some real car come on up to pc. and lets race. you fucking wannabe. jeff240sx is a fucking fag :fawkd: :fawkd:
what a fucking tool.. :jerkit: :jerkit: :jerkit:

[matlock]

I can't understand why you would want to put a domestic engine in a 240, shakes head, but thats just me. But then again I don't understand some people like this tool that started the thread haha.

[420sx]

wow............ well someone took a piss in his cereal

[240silvia]

And now we get.... that's right.... the golf clap!

[420sx]

And now we get.... that's right.... the golf clap!

what the fuck? what are you talking about? golf clap :ugh:

[DoriftoSlut]

And now we get.... that's right.... the golf clap!


um..how about not.

[infinitexsound]

yum anyone wants some chicken curry? its the bomb diggity.....

[smellslikecurry]

mmmmmmmmmm curry

[ThatGuy]

*Jingle jingle jingle*

Hmmm, sounds like Thread Keys.

:lockd:

Yep, it was keys! :faint: