NISMO 2 Way LSD R200

[Ichiban4]

SOLD
close thread

[Ichiban4]

Weekend bump

[Ichiban4]

bump bump TTT

[Luvs2slide]

Do u have the input shafts?

Sent from my SM-G930T using Tapatalk

[Ichiban4]

Do u have the input shafts?

Sent from my SM-G930T using Tapatalk

Like it says above, no shafts ect, you'd have to use your own. Slightly negotiable on price.

[Luvs2slide]

I thought all the Nismo diffs use special input shafts. Are u certain the stock shafts will work?

Sent from my SM-G930T using Tapatalk

[Ichiban4]

I thought all the Nismo diffs use special input shafts. Are u certain the stock shafts will work?

Sent from my SM-G930T using Tapatalk

No, I don't know for sure, you would have to research that.

[Ichiban4]

From my research r33 skyline, z33, q45, and possible g35/37 all could be possible shafts to use.

It is 31 spline

[Nismoboy1992]

You can't use the stock shafts. I found that out the hard way from when I bought a 2 way and someone said that my shafts would work. Installed the diff and everything, put the car in gear and heard the rear end grinding.

The Nismo 2 ways are 30 spline 31mm. s13, s14, j30 stock shafts are 29 spline 30mm. I had to source s15 6 bolt 3x2 shafts for it to be a direct fit for me since I am running 6 bolt 3x2 axles. Q45 should work too, but then you will have to have the right bolt pattern axles and may have to cut the shafts.

[silverarrow27]

I thought all the Nismo diffs use special input shafts. Are u certain the stock shafts will work?

Sent from my SM-G930T using Tapatalk

Not all, the earlier versions of the Nismo 2 Way LSDs stateside that were being sold in the early 2000s were direct drop-ins into open diff. pumpkins and stock shafts were also utilized. I currently have one on my car. You would have to know which version of the Nismo 2 Way which is being for sale here.

[Ichiban4]

Thanks for the extra info

[Ichiban4]

$399 shipped to your door takes it