PDA

View Full Version : Vacuum/pressure routing

coolshirtrobert
04-17-2016, 09:58 AM
Any advice on how to route everything?
I have an aem tru boost guage, tial external waste gate, synapse synchronic bov. Was trying to use this as a reference. I have everything routed in the first picture. Just need to get a boost only source for the bov. I doubt I can tee off the line on the compressor since it shouldn't be teed to the wastegate.
9242392424

Sent from my SM-N920T using Tapatalk
Tyler_240
04-17-2016, 12:02 PM
One of the bottom ports on an SR Throttle Body is boost only. It is before the throttle plate. Not sure what motor you got...

https://encrypted-tbn0.gstatic.com/images?q=tbn:ANd9GcS8SFpD78S6JBiMkOqapdgBGOiLpT9sg b_FjrA_w6e0aLSSbxe4
coolshirtrobert
04-17-2016, 02:03 PM
One of the bottom ports on an SR Throttle Body is boost only. It is before the throttle plate. Not sure what motor you got...

https://encrypted-tbn0.gstatic.com/images?q=tbn:ANd9GcS8SFpD78S6JBiMkOqapdgBGOiLpT9sg b_FjrA_w6e0aLSSbxe4
Should've mentioned it's for an Sr. Will definitely take a look when I get home. Thank you Tyler_240.👍

Sent from my SM-N920T using Tapatalk
coolshirtrobert
04-17-2016, 07:00 PM
Freddy intake manifold only has 2 ports before the throttle body. Bottom left is teed off to my tru boost guage and synapse synchronic bov. Bottom right is routed to the aeromotive fpr.

http://uploads.tapatalk-cdn.com/20160418/812d941e09b339f7c398aa7c9a037ef2.jpg

Sent from my SM-N920T using Tapatalk
coolshirtrobert
04-17-2016, 07:01 PM
Is my only option to tap my intercooler pipe?

Sent from my SM-N920T using Tapatalk
Tyler_240
04-17-2016, 07:27 PM
http://www.frsport.com/ATP-ATP-FTG-010-Turbo-Quick-Tap-Fitting-for-Boost-Source_p_7854.html

I have used that for a boost source before and had no issues at 16psi. I tapped the 90* coupler coming off my turbo and it worked fine.

For what its worth, I have my FPR + Boost Gauge + MAP Sensor Tee'd and my BOV had nothing Tee'd off of it. I understand some folks say don't Tee your FPR, etc..etc..but when I bought my MS3, it calls for Tee'ing off the FPR.

These sources are after the throttle body so to speak...they see manifold pressure, which is both vacuum and boost.
coolshirtrobert
04-17-2016, 11:03 PM
May have to stop by frsport tomorrow. Gonna route everything the way you have it and see if it works from there. Thanks bro. 👍👍

Sent from my SM-N920T using Tapatalk