help please!!!!

[kouki98]

Ok so hopfully my fellow zilvians can help me out of a bind.

So here it goes So my 98 s14 has decided to do throw a CEL code p0100 maf circuit malfunction. My car now ramdomly bucks/ hesitates when at a constant speed or above
3k rpms. I have cleaned my maf,and cleaned the plugs and checked the harness and they all seem fine. Any ideas or suggestions would be greatly appreciated.

Info:1998 240sx
128, xxx mi
Bone stock motor

[sidewayzzenki]

Wow shes a baby..ha

[eek]

Check your plug, make sure its plugged in all the way. Also check the wires to the plug, hopefully nothing is frayed or broken.

[kouki98]

I'll check it out today. Thanks

[Roki187]

U need a new or referb mass air flow sensor.

[SuperBlackS14]

I had this same issue... Check the wires going to the maf. Mine had the 3rd wire (red?) broken. Simple solder fixed it right up.

Also... Small Questions Thread next time perhaps?