PDA

View Full Version : Dat bi daint RHD kouki sr20det build! Lots of pics


projectkouki
03-09-2013, 10:50 PM
Hi all, after owning an 89 sr20 powered coupe and giving it to my brother, i finally found a 97 240sx for a great price! I am building another sr20det and converting it to RHD just for the hell of it!:naughtyd:
Here's what it looked like on the inside when i first bought it!
http://i38.photobucket.com/albums/e105/uraskit/Facebook/Project%20450sx/dbf12995-20a6-498f-801f-0daf0f5fdd26.jpg
Fixed it up to stock and put some PBM coil overs and rims on it! Just need the lip for it!
http://i38.photobucket.com/albums/e105/uraskit/mytouchpics712.jpg
Bought an S14 sr20 bottom end to put my s13 head on it! Had to plug the hole to make the s13 head work!
http://i38.photobucket.com/albums/e105/uraskit/IMG_20120601_152202.jpg
Here's the Apexi HG and the Arp head studs! All clean looking!
http://i38.photobucket.com/albums/e105/uraskit/IMG_20120601_211125.jpg
Here's the head i just got back from the machine shop all nice and cleaned up also!
http://i38.photobucket.com/albums/e105/uraskit/IMG_20120603_202559.jpg
Not enough 240's!
http://i38.photobucket.com/albums/e105/uraskit/IMG_20120605_173804.jpg
here's the engine bay before we started the RHD conversion!
http://i38.photobucket.com/albums/e105/uraskit/darn004.jpg
Cutting the firewall!
http://i38.photobucket.com/albums/e105/uraskit/darn012.jpg
Did a little bit more cutting and welding on the firewall!
http://i38.photobucket.com/albums/e105/uraskit/darn084.jpg
Some darn wiring!
http://i38.photobucket.com/albums/e105/uraskit/darn013.jpg
http://i38.photobucket.com/albums/e105/uraskit/darn008.jpg
http://i38.photobucket.com/albums/e105/uraskit/darn007.jpg
lining up the steering column getting ready for some more welding!
http://i38.photobucket.com/albums/e105/uraskit/darn097.jpg
Ready to remove old internals and replace with BC valves and springs kit!
http://i38.photobucket.com/albums/e105/uraskit/darn117.jpg
Stock on right and BC on left!
http://i38.photobucket.com/albums/e105/uraskit/darn126.jpg
These darn seals are hard but got them all out!
http://i38.photobucket.com/albums/e105/uraskit/darn123.jpg
got the valves and springs in!
http://i38.photobucket.com/albums/e105/uraskit/darn133.jpg
Did some polishing and painting on my friend's rims while awaiting funds!
http://i38.photobucket.com/albums/e105/uraskit/darn073.jpg
getting ready to test fit the motor...
http://i38.photobucket.com/albums/e105/uraskit/darn137.jpg
Precission turbo and Doc Racing manifold came in! :yum:
http://i38.photobucket.com/albums/e105/uraskit/darn130.jpg
This is it for now~ More updates along with pics soon!

projectkouki
03-18-2013, 07:47 PM
got my test shim kit in! Time to do the shimming...
http://i38.photobucket.com/albums/e105/uraskit/IMG_20130312_181621.jpg
http://i38.photobucket.com/albums/e105/uraskit/IMG_20130312_182132.jpg
wow that cam looks good! Going to be crazy!
http://i38.photobucket.com/albums/e105/uraskit/IMG_20130312_181556.jpg
tried to torque the bolts down and then 2 of the bolts snapped... darnit..
http://i38.photobucket.com/albums/e105/uraskit/IMG_20130312_200822.jpg
had to buy this!
http://i38.photobucket.com/albums/e105/uraskit/IMG_20130318_203113.jpg
got them out!
http://i38.photobucket.com/albums/e105/uraskit/IMG_20130318_203129.jpg
Need to visit the bolt store when i get time! In the mean time i bought some rims for a good price!
http://i38.photobucket.com/albums/e105/uraskit/IMG_20130316_164221.jpg
True 3 piece!:snoop:
http://i38.photobucket.com/albums/e105/uraskit/IMG_20130316_190125.jpg
Test fitting them on my Zenki!
http://i38.photobucket.com/albums/e105/uraskit/IMG_20130317_183415.jpg
http://i38.photobucket.com/albums/e105/uraskit/IMG_20130317_182845.jpg
Yea im going to need a FATTER lip in the rear!
http://i38.photobucket.com/albums/e105/uraskit/IMG_20130317_182833.jpg

No 240.. No id
03-18-2013, 07:57 PM
do you have a clear pic of the tool you used for the broken bolts? how did you use it?

twinspool
03-18-2013, 08:18 PM
This is the most baller build ever on this site! lol

projectkouki
03-18-2013, 11:19 PM
do you have a clear pic of the tool you used for the broken bolts? how did you use it?
Here's a clearer pic!
http://i38.photobucket.com/albums/e105/uraskit/20130318_235343.jpg
This kit I bought from lowes! It works like a revers drill bit! I simply just drilled a small hole in the center of the bolt then used the kit and reversed the drill and it came right out! Comes in handy!

rawgarage
03-18-2013, 11:25 PM
Keep working it will be nice

Teigen
03-19-2013, 01:33 AM
Great, the DOC mani is very good it seems and after what I've heard. What intake are you going with?

Must been some wacko those cambolts, breaking on less than the tightening specs lol.
Planning to strip and paint your engine bay too when you first have it like this?


Keep it coming

Peace :)

projectkouki
03-19-2013, 08:13 AM
Great, the DOC mani is very good it seems and after what I've heard. What intake are you going with?

Must been some wacko those cambolts, breaking on less than the tightening specs lol.
Planning to strip and paint your engine bay too when you first have it like this?


Keep it coming

Peace :)

thanks man! I'm using a greddy intake manifold! I'll post some pics of it and some other stuff when i get the chance!

projectkouki
03-19-2013, 04:37 PM
Greddy intake manifold! I want to fit the q45 tb on it soon! Ive been trying to polish it but I think ill end up painting it!
http://i38.photobucket.com/albums/e105/uraskit/20130319_121852.jpg
Also stopped by the bolt store today!
http://i38.photobucket.com/albums/e105/uraskit/20130319_163055.jpg
http://i38.photobucket.com/albums/e105/uraskit/20130319_171118.jpg

dreamin240sx
03-19-2013, 08:12 PM
are you swapping firewalls or just making your own?? i hope your swapping one for the sake of the car haha.. good job on the build and parts seems like its coming along nicely keep it up.

projectkouki
03-19-2013, 09:10 PM
are you swapping firewalls or just making your own?? i hope your swapping one for the sake of the car haha.. good job on the build and parts seems like its coming along nicely keep it up.
Thanks! No im not swaping firewalls! We are making a firewall. Going to do floor mount pedals with the reservoirs on the inside! Bring on the haters!

No 240.. No id
03-19-2013, 09:26 PM
Here's a clearer pic!
http://i38.photobucket.com/albums/e105/uraskit/20130318_235343.jpg
This kit I bought from lowes! It works like a revers drill bit! I simply just drilled a small hole in the center of the bolt then used the kit and reversed the drill and it came right out! Comes in handy!

Thank you so much. Am defiantly buying one.

lorettdshaw1
03-19-2013, 09:53 PM
Interested in pics as wellhttp://www.skincaretipss.com/24.jpg

pjmrnolife1
03-19-2013, 11:42 PM
Plans and pics for your steering column setup please

twinspool
03-20-2013, 01:34 PM
Interested in pics of the intricate radio/cd play set up you have going on there!!!!

projectkouki
03-20-2013, 05:24 PM
okay guys, here's some more pics of the steering column setup my brother from Dat bi daint Motorsports fabbed up for me! Why buy a JDM clip when you can make the shit yourself!:facepalm: Haters keep hating!
http://i38.photobucket.com/albums/e105/uraskit/alpha012.jpg
http://i38.photobucket.com/albums/e105/uraskit/alpha010.jpg
http://i38.photobucket.com/albums/e105/uraskit/alpha006.jpg
http://i38.photobucket.com/albums/e105/uraskit/alpha009.jpg
http://i38.photobucket.com/albums/e105/uraskit/alpha007.jpg
Going to do a custom center console with all the switches and shit on it! but here it is before! I will get some pics of it when it is done! Also got the hydro Ebrake fabbed up from a friend! Looks great! Cant wait to use it! :coold:
http://i38.photobucket.com/albums/e105/uraskit/alpha008.jpg
Im probably going to do a custom dash or i might try to fit an S15 dash! not sure yet but I will get more pics soon! Thanks :bow:

projectkouki
03-20-2013, 05:28 PM
Thank you so much. Am defiantly buying one.

NO problem!:bigok: It is definately a must have tool when working on motors or vehicles!

twinspool
03-20-2013, 08:00 PM
I don't see why spend time fabbing up a fire wall and stuff when you could have easily spent 500+ on a front clip and more time fabbing to get it to work and look just as good as you made it hidden behind a dash??

projectkouki
03-20-2013, 08:07 PM
I don't see why spend time fabbing up a fire wall and stuff when you could have easily spent 500+ on a front clip and more time fabbing to get it to work and look just as good as you made it hidden behind a dash??
Hater! Red neck rhd ftw!

Thmotorsports
03-21-2013, 10:24 AM
agreed with twinspool but hey what ever works works!!! maybe he wanted to practice the fabing up skills :D

Good work though! cant wait for it to be done

projectkouki
03-21-2013, 01:55 PM
agreed with twinspool but hey what ever works works!!! maybe he wanted to practice the fabing up skills :D

Good work though! cant wait for it to be done

thanks man! i can't wait to finish it!

Teigen
03-21-2013, 04:44 PM
Dat bi Daint!

Extreme Dimensions
03-21-2013, 04:47 PM
DAMN!!! keep this build up RHD <3

projectkouki
03-21-2013, 08:05 PM
Dat bi Daint!
That's right!

projectkouki
03-21-2013, 08:08 PM
DAMN!!! keep this build up RHD <3
Lol thanks bro! Just waiting on funds right now! Ill update with more pics soon!

twinspool
03-21-2013, 08:10 PM
agreed with twinspool but hey what ever works works!!! maybe he wanted to practice the fabing up skills :D

Good work though! cant wait for it to be done

I don't agree with twinspool, this guy could have just spent $700+ on a rhd clip, waited for it to come in, cut out one fire wall then cut the other (don't forget the wipers), and welded it in and in the end spending more time on it, but he just chose the path that saves you money and time and will work just as good and look just as good hidden behind a dash... don't praise this thread!!!










LMAO jk I'm the one doing the fab work on this car, I'm just talking crap hahahahh

projectkouki
03-21-2013, 09:51 PM
Just received more funds so update! The exhaust fabbed up by Marc from dat bi daint motorsports!! DAT BI DAINT!!

http://i1045.photobucket.com/albums/b456/marc1000rr/20130120_203912_zps208c6c1f.jpg
http://i1045.photobucket.com/albums/b456/marc1000rr/20130121_154345_zps3c26a160.jpg
http://i1045.photobucket.com/albums/b456/marc1000rr/20130121_171746_zps1781d2f9.jpg
http://i1045.photobucket.com/albums/b456/marc1000rr/20130122_125208_zps403aec60.jpg
http://i1045.photobucket.com/albums/b456/marc1000rr/20130122_125124_zpsaed0e901.jpg
http://i1045.photobucket.com/albums/b456/marc1000rr/20130122_125300_zpseca41410.jpg
http://i1045.photobucket.com/albums/b456/marc1000rr/20130124_105503_zps7062c770.jpg
http://i1045.photobucket.com/albums/b456/marc1000rr/20130124_110537_zps173ff68b.jpg
http://i1045.photobucket.com/albums/b456/marc1000rr/20130124_105650_zps2112b7ef.jpg
http://i1045.photobucket.com/albums/b456/marc1000rr/20130124_105524_zps947f658d.jpg

silviaks2nr
03-21-2013, 10:10 PM
Where'd you get the megaphone tip? I need one for my bike.

cwazy13oi
04-06-2013, 07:10 PM
dat bi daint motorsports RHD project 2 coming soon.

fliprayzin240sx
04-06-2013, 07:26 PM
Great, the DOC mani is very good it seems and after what I've heard. What intake are you going with?

Must been some wacko those cambolts, breaking on less than the tightening specs lol.
Planning to strip and paint your engine bay too when you first have it like this?


Keep it coming

Peace :)

Make sure you follow the tightening sequence per FSM. If you dont follow it, you're liable to snap more cam retainer bolts.

Ka24Power
04-06-2013, 08:03 PM
Also stopped by the bolt store today!
http://i38.photobucket.com/albums/e105/uraskit/20130319_163055.jpg
http://i38.photobucket.com/albums/e105/uraskit/20130319_171118.jpg

Please tell me this is a joke. You can't run mild grade hardware in place of camshaft cap bolts.

projectkouki
04-06-2013, 11:04 PM
No joke... Bolts are grade 8 and heat treated.

Ka24Power
04-07-2013, 05:53 AM
I would personally never replace any internal engine hardware with a bolt that isn't application specific. Your engine your call though!

projectkouki
04-07-2013, 06:47 AM
I agree with what you are saying! I wouldnt have bought them if the owner of the only bolt store here that had bolts that worked didnt tell me that these bolts are made for engine wear and tare. Besides I got to thinking after I bought the bolts that ill only replace the ones that snapped. So the picture I posted is misleading...

Ka24Power
04-07-2013, 07:14 AM
Hope it works out, make sure you tighten the cams in the correct factory sequence!

projectkouki
04-07-2013, 09:05 AM
i saw a picture of the sequence but not sure if its right. do you know what the right sequence is?

Piggy
04-07-2013, 09:09 AM
Nice to see this in the area. When and where will I be able to see this thing out?

projectkouki
04-07-2013, 09:54 AM
Nice to see this in the area. When and where will I be able to see this thing out?

thanks man! i hope to have it done by crusin the coast!

Ka24Power
04-07-2013, 10:32 AM
I don't know the sequence off hand, I'd recommend looking it up in the FSM

Piggy
04-08-2013, 07:34 AM
thanks man! i hope to have it done by crusin the coast!

I'll see it there hopefully.

zenkiZ
04-30-2013, 12:00 PM
where the updates at??

projectkouki
04-30-2013, 05:02 PM
Waiting on funds. And trying to get these damn shims sized correctly! And trying to get the zenki ready for the drift day!

japslapsilvia
05-03-2013, 08:16 AM
Dude you should NOT use those bolts to hold your cam caps. They are Fully Threaded. Stock ones are NOT and there is good reason for them not being fully threaded.

The shank (non threaded portion) of the stock bolt is bigger in diamater then the threaded portion, so that the fit in the cap is tight. Your Fully threaded bolts will leave a gap, which will inturn make it impossible to achieve the fully required clamping load of the caps. Furthermore the threads can act as a slow speed mill and eventually distort the holes in the caps.

projectkouki
05-03-2013, 08:27 AM
This is true. Im not going to use them! I'm going with original bolts. Just need to find some.

japslapsilvia
05-03-2013, 08:29 AM
This is true. Im not going to use them! I'm going with original bolts. Just need to find some.


order cam cap studs from RHDjapan, Naprec makes them. sooo much easier instead of bolts.

projectkouki
05-03-2013, 09:13 AM
Couldnt find them on the rhdjapan site so I just ordered the oem bolts from frsport!