Dat bi daint RHD kouki sr20det build! Lots of pics - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

projectkouki · 03-09-2013, 10:50 PM

Hi all, after owning an 89 sr20 powered coupe and giving it to my brother, i finally found a 97 240sx for a great price! I am building another sr20det and converting it to RHD just for the hell of it!

Here's what it looked like on the inside when i first bought it!

Fixed it up to stock and put some PBM coil overs and rims on it! Just need the lip for it!

Bought an S14 sr20 bottom end to put my s13 head on it! Had to plug the hole to make the s13 head work!

Here's the Apexi HG and the Arp head studs! All clean looking!

Here's the head i just got back from the machine shop all nice and cleaned up also!

Not enough 240's!

here's the engine bay before we started the RHD conversion!

Cutting the firewall!

Did a little bit more cutting and welding on the firewall!

Some darn wiring!

lining up the steering column getting ready for some more welding!

Ready to remove old internals and replace with BC valves and springs kit!

Stock on right and BC on left!

These darn seals are hard but got them all out!

got the valves and springs in!

Did some polishing and painting on my friend's rims while awaiting funds!

getting ready to test fit the motor...

Precission turbo and Doc Racing manifold came in!

This is it for now~ More updates along with pics soon!

projectkouki · 03-18-2013, 07:47 PM

got my test shim kit in! Time to do the shimming...

wow that cam looks good! Going to be crazy!

tried to torque the bolts down and then 2 of the bolts snapped... darnit..

had to buy this!

got them out!

Need to visit the bolt store when i get time! In the mean time i bought some rims for a good price!

True 3 piece!

Test fitting them on my Zenki!

Yea im going to need a FATTER lip in the rear!

No 240.. No id · 03-18-2013, 07:57 PM

do you have a clear pic of the tool you used for the broken bolts? how did you use it?

twinspool · 03-18-2013, 08:18 PM

This is the most baller build ever on this site! lol

projectkouki · 03-18-2013, 11:19 PM

Quote:

Originally Posted by No 240.. No id

do you have a clear pic of the tool you used for the broken bolts? how did you use it?

Here's a clearer pic!

This kit I bought from lowes! It works like a revers drill bit! I simply just drilled a small hole in the center of the bolt then used the kit and reversed the drill and it came right out! Comes in handy!

rawgarage · 03-18-2013, 11:25 PM

Keep working it will be nice

Teigen · 03-19-2013, 01:33 AM

Great, the DOC mani is very good it seems and after what I've heard. What intake are you going with?

Must been some wacko those cambolts, breaking on less than the tightening specs lol.
Planning to strip and paint your engine bay too when you first have it like this?

Keep it coming

Peace

projectkouki · 03-19-2013, 08:13 AM

Quote:

Originally Posted by Teigen

Great, the DOC mani is very good it seems and after what I've heard. What intake are you going with?

Must been some wacko those cambolts, breaking on less than the tightening specs lol.
Planning to strip and paint your engine bay too when you first have it like this?

Keep it coming

Peace

thanks man! I'm using a greddy intake manifold! I'll post some pics of it and some other stuff when i get the chance!

projectkouki · 03-19-2013, 04:37 PM

Greddy intake manifold! I want to fit the q45 tb on it soon! Ive been trying to polish it but I think ill end up painting it!

Also stopped by the bolt store today!

dreamin240sx · 03-19-2013, 08:12 PM

are you swapping firewalls or just making your own?? i hope your swapping one for the sake of the car haha.. good job on the build and parts seems like its coming along nicely keep it up.

projectkouki · 03-19-2013, 09:10 PM

Quote:

Originally Posted by dreamin240sx

are you swapping firewalls or just making your own?? i hope your swapping one for the sake of the car haha.. good job on the build and parts seems like its coming along nicely keep it up.

Thanks! No im not swaping firewalls! We are making a firewall. Going to do floor mount pedals with the reservoirs on the inside! Bring on the haters!

No 240.. No id · 03-19-2013, 09:26 PM

Quote:

Originally Posted by projectkouki

Here's a clearer pic!

This kit I bought from lowes! It works like a revers drill bit! I simply just drilled a small hole in the center of the bolt then used the kit and reversed the drill and it came right out! Comes in handy!

Thank you so much. Am defiantly buying one.

lorettdshaw1 · 03-19-2013, 09:53 PM

Interested in pics as well

pjmrnolife1 · 03-19-2013, 11:42 PM

Plans and pics for your steering column setup please

twinspool · 03-20-2013, 01:34 PM

Interested in pics of the intricate radio/cd play set up you have going on there!!!!

projectkouki · 03-20-2013, 05:24 PM

okay guys, here's some more pics of the steering column setup my brother from Dat bi daint Motorsports fabbed up for me! Why buy a JDM clip when you can make the shit yourself!

Haters keep hating!

Going to do a custom center console with all the switches and shit on it! but here it is before! I will get some pics of it when it is done! Also got the hydro Ebrake fabbed up from a friend! Looks great! Cant wait to use it!

Im probably going to do a custom dash or i might try to fit an S15 dash! not sure yet but I will get more pics soon! Thanks

projectkouki · 03-20-2013, 05:28 PM

Quote:

Originally Posted by No 240.. No id

Thank you so much. Am defiantly buying one.

NO problem!

It is definately a must have tool when working on motors or vehicles!

twinspool · 03-20-2013, 08:00 PM

I don't see why spend time fabbing up a fire wall and stuff when you could have easily spent 500+ on a front clip and more time fabbing to get it to work and look just as good as you made it hidden behind a dash??

projectkouki · 03-20-2013, 08:07 PM

Quote:

Originally Posted by twinspool

I don't see why spend time fabbing up a fire wall and stuff when you could have easily spent 500+ on a front clip and more time fabbing to get it to work and look just as good as you made it hidden behind a dash??

Hater! Red neck rhd ftw!

Thmotorsports · 03-21-2013, 10:24 AM

agreed with twinspool but hey what ever works works!!! maybe he wanted to practice the fabing up skills

Good work though! cant wait for it to be done

projectkouki · 03-21-2013, 01:55 PM

Quote:

Originally Posted by Thmotorsports

agreed with twinspool but hey what ever works works!!! maybe he wanted to practice the fabing up skills

Good work though! cant wait for it to be done

thanks man! i can't wait to finish it!

Teigen · 03-21-2013, 04:44 PM

Dat bi Daint!

Extreme Dimensions · 03-21-2013, 04:47 PM

DAMN!!! keep this build up RHD <3

projectkouki · 03-21-2013, 08:05 PM

Quote:

Originally Posted by Teigen

Dat bi Daint!

That's right!

projectkouki · 03-21-2013, 08:08 PM

Quote:

Originally Posted by Extreme Dimensions

DAMN!!! keep this build up RHD <3

Lol thanks bro! Just waiting on funds right now! Ill update with more pics soon!

twinspool · 03-21-2013, 08:10 PM

Quote:

Originally Posted by Thmotorsports

agreed with twinspool but hey what ever works works!!! maybe he wanted to practice the fabing up skills

Good work though! cant wait for it to be done

I don't agree with twinspool, this guy could have just spent $700+ on a rhd clip, waited for it to come in, cut out one fire wall then cut the other (don't forget the wipers), and welded it in and in the end spending more time on it, but he just chose the path that saves you money and time and will work just as good and look just as good hidden behind a dash... don't praise this thread!!!

LMAO jk I'm the one doing the fab work on this car, I'm just talking crap hahahahh

projectkouki · 03-21-2013, 09:51 PM

Just received more funds so update! The exhaust fabbed up by Marc from dat bi daint motorsports!! DAT BI DAINT!!

silviaks2nr · 03-21-2013, 10:10 PM

Where'd you get the megaphone tip? I need one for my bike.

cwazy13oi · 04-06-2013, 07:10 PM

dat bi daint motorsports RHD project 2 coming soon.

*fliprayzin240sx* · 04-06-2013, 07:26 PM

Quote:

Originally Posted by Teigen

Great, the DOC mani is very good it seems and after what I've heard. What intake are you going with?

Must been some wacko those cambolts, breaking on less than the tightening specs lol.
Planning to strip and paint your engine bay too when you first have it like this?

Keep it coming

Peace

Make sure you follow the tightening sequence per FSM. If you dont follow it, you're liable to snap more cam retainer bolts.

03-09-2013, 10:50 PM	#1
projectkouki Join Date: Nov 2012 Location: OSMS Posts: 39 Trader Rating: (0) Feedback Score: 0 reviews	Dat bi daint RHD kouki sr20det build! Lots of pics Hi all, after owning an 89 sr20 powered coupe and giving it to my brother, i finally found a 97 240sx for a great price! I am building another sr20det and converting it to RHD just for the hell of it! Here's what it looked like on the inside when i first bought it! Fixed it up to stock and put some PBM coil overs and rims on it! Just need the lip for it! Bought an S14 sr20 bottom end to put my s13 head on it! Had to plug the hole to make the s13 head work! Here's the Apexi HG and the Arp head studs! All clean looking! Here's the head i just got back from the machine shop all nice and cleaned up also! Not enough 240's! here's the engine bay before we started the RHD conversion! Cutting the firewall! Did a little bit more cutting and welding on the firewall! Some darn wiring! lining up the steering column getting ready for some more welding! Ready to remove old internals and replace with BC valves and springs kit! Stock on right and BC on left! These darn seals are hard but got them all out! got the valves and springs in! Did some polishing and painting on my friend's rims while awaiting funds! getting ready to test fit the motor... Precission turbo and Doc Racing manifold came in! This is it for now~ More updates along with pics soon! Last edited by projectkouki; 03-18-2013 at 07:03 PM..

03-18-2013, 07:57 PM	#3
No 240.. No id Zilvia FREAK! Join Date: Jul 2011 Location: spaceship Posts: 1,306 Trader Rating: (35) Feedback Score: 35 reviews	do you have a clear pic of the tool you used for the broken bolts? how did you use it? __________________ You can sleep in your car, but you can't drive your house.

03-19-2013, 01:33 AM	#7
Teigen Zilvia Junkie Join Date: Oct 2012 Location: Dark side of the moon Posts: 309 Trader Rating: (0) Feedback Score: 0 reviews	Great, the DOC mani is very good it seems and after what I've heard. What intake are you going with? Must been some wacko those cambolts, breaking on less than the tightening specs lol. Planning to strip and paint your engine bay too when you first have it like this? Keep it coming Peace __________________ Don't PM me asking for parts

03-19-2013, 08:12 PM	#10
dreamin240sx Zilvia Junkie Join Date: Aug 2009 Location: west virginia Age: 29 Posts: 530 Trader Rating: (2) Feedback Score: 2 reviews	are you swapping firewalls or just making your own?? i hope your swapping one for the sake of the car haha.. good job on the build and parts seems like its coming along nicely keep it up. __________________ RB POWA!!!!!!!!

03-21-2013, 04:44 PM	#22
Teigen Zilvia Junkie Join Date: Oct 2012 Location: Dark side of the moon Posts: 309 Trader Rating: (0) Feedback Score: 0 reviews	Dat bi Daint! __________________ Don't PM me asking for parts

03-18-2013, 07:47 PM	#2
projectkouki Join Date: Nov 2012 Location: OSMS Posts: 39 Trader Rating: (0) Feedback Score: 0 reviews	got my test shim kit in! Time to do the shimming... wow that cam looks good! Going to be crazy! tried to torque the bolts down and then 2 of the bolts snapped... darnit.. had to buy this! got them out! Need to visit the bolt store when i get time! In the mean time i bought some rims for a good price! True 3 piece! Test fitting them on my Zenki! Yea im going to need a FATTER lip in the rear!

03-18-2013, 08:18 PM	#4
twinspool Zilvia Junkie Join Date: May 2006 Location: mississippi Posts: 349 Trader Rating: (7) Feedback Score: 7 reviews	This is the most baller build ever on this site! lol

03-18-2013, 11:25 PM	#6
rawgarage Banned from the Marketplace Join Date: Oct 2007 Location: h o u s t o n Age: 32 Posts: 5,990 Trader Rating: (75) Feedback Score: 75 reviews	Keep working it will be nice

03-19-2013, 04:37 PM	#9
projectkouki Join Date: Nov 2012 Location: OSMS Posts: 39 Trader Rating: (0) Feedback Score: 0 reviews	Greddy intake manifold! I want to fit the q45 tb on it soon! Ive been trying to polish it but I think ill end up painting it! Also stopped by the bolt store today!

03-19-2013, 09:53 PM	#13
lorettdshaw1 Join Date: Mar 2013 Location: London Age: 35 Posts: 9 Trader Rating: (0) Feedback Score: 0 reviews	Interested in pics as well

03-19-2013, 11:42 PM	#14
pjmrnolife1 Zilvia Member Join Date: Aug 2006 Location: ft laud Age: 34 Posts: 149 Trader Rating: (-1) Feedback Score: -1 reviews	Plans and pics for your steering column setup please

03-20-2013, 01:34 PM	#15
twinspool Zilvia Junkie Join Date: May 2006 Location: mississippi Posts: 349 Trader Rating: (7) Feedback Score: 7 reviews	Interested in pics of the intricate radio/cd play set up you have going on there!!!!

03-20-2013, 05:24 PM	#16
projectkouki Join Date: Nov 2012 Location: OSMS Posts: 39 Trader Rating: (0) Feedback Score: 0 reviews	okay guys, here's some more pics of the steering column setup my brother from Dat bi daint Motorsports fabbed up for me! Why buy a JDM clip when you can make the shit yourself! Haters keep hating! Going to do a custom center console with all the switches and shit on it! but here it is before! I will get some pics of it when it is done! Also got the hydro Ebrake fabbed up from a friend! Looks great! Cant wait to use it! Im probably going to do a custom dash or i might try to fit an S15 dash! not sure yet but I will get more pics soon! Thanks

03-20-2013, 08:00 PM	#18
twinspool Zilvia Junkie Join Date: May 2006 Location: mississippi Posts: 349 Trader Rating: (7) Feedback Score: 7 reviews	I don't see why spend time fabbing up a fire wall and stuff when you could have easily spent 500+ on a front clip and more time fabbing to get it to work and look just as good as you made it hidden behind a dash??

03-21-2013, 10:24 AM	#20
Thmotorsports Zilvia.net Advertiser Join Date: Apr 2007 Location: Chicago, IL Age: 41 Posts: 2,810 Trader Rating: (28) Feedback Score: 28 reviews	agreed with twinspool but hey what ever works works!!! maybe he wanted to practice the fabing up skills Good work though! cant wait for it to be done

03-21-2013, 04:47 PM	#23
Extreme Dimensions Zilvia.net Advertiser Join Date: Feb 2008 Location: Fullerton, CA Posts: 1,468 Trader Rating: (9) Feedback Score: 9 reviews	DAMN!!! keep this build up RHD <3 __________________ - Chris Gary p: 714-278-8000 x 19 E: [email protected]

03-21-2013, 09:51 PM	#27
projectkouki Join Date: Nov 2012 Location: OSMS Posts: 39 Trader Rating: (0) Feedback Score: 0 reviews	Just received more funds so update! The exhaust fabbed up by Marc from dat bi daint motorsports!! DAT BI DAINT!!

03-21-2013, 10:10 PM	#28
silviaks2nr Nissanaholic! Join Date: Nov 2004 Location: SC Posts: 2,106 Trader Rating: (10) Feedback Score: 10 reviews	Where'd you get the megaphone tip? I need one for my bike. __________________ '98 240sx 5spd

04-06-2013, 07:10 PM	#29
cwazy13oi Join Date: Mar 2011 Location: Biloxi,ms Age: 35 Posts: 3 Trader Rating: (0) Feedback Score: 0 reviews	dat bi daint motorsports RHD project 2 coming soon.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode