rtv or cork rubber gasket?

[soryu]

was thinking what are you guys using.?
for the oil pan gasket are you using the rtv sealant fsm says to use it or did you just drop in a gasket from your local auto shop?
i used the rtv sealant and it's leaking worse than before.
gonna try again but just wanted to check what everyone else is using.

[DRIFTERS14]

rtv is the best
( make sure u allow it to dry before u put oil back in)

i used toyota FIPG ( never had any issue)
part number 00295-00103

[slider2828]

Just use permatex black.... Clean surfaces with carb cleaning. Dry for 2 minutes, hand tight for about 20 minutes, then tightened to tork spec....

[Kingtal0n]

razor blade -> brake kleen -> permatex grey.

everybody has their own way :coolugh:

[rcdad123]

rtv all the way. make sure you clean and dry both mating surfaces and make sure oil pan is not warped. lay about 1/16th of an inch thick on the whole width of the oil pan. let it dry for about 5 minutes and install. make sure you don`t hit anything that would wipe the rtv off the pan.

[boms]

Honda bond