View Full Version : Sti injector adapters?
Sil#2
10-20-2011, 09:37 PM
Trying to find some adapters for sti injectors cause I just hate wires. Searched and all the links are now dead. EBay doesn't state these specific adapters. Anyone know where I can still get these? Thanks.
waxball88
10-20-2011, 10:21 PM
Buy STi injector plugs and replace stock plugs.... I believe the are denso "ovular" connectors. A lot of the subies use the same clips go down to u-pull and take clips off a car that matches.
Mitsubayati
10-20-2011, 10:31 PM
I was wondering this same thing, because I didn't want to splice in the plugs I have just to change them for something that works with stock connectors later haha. Is there any adapter available that plugs into the oem harness and sti injectors?
waxball88
10-20-2011, 10:33 PM
I don't believe so.....Its 8 wires.....solder and shrink them
Cut them off and repeat for different injectors.
I believe my plugs were off a legacy but don't quote me.
GroundPerformance
10-20-2011, 11:12 PM
You may be able to depin the connector and move it to the STI injector connector for a cleaner conversion. I will trying this myself since I'm also using the yellow STI side feed injectors on the SR motor I'm working on. GL!
You may be able to depin the connector and move it to the STI injector connector for a cleaner conversion. I will trying this myself since I'm also using the yellow STI side feed injectors on the SR motor I'm working on. GL!
This doesnt work.
Only the Denso top feed pins and the subaru side feed pins interchange on the connectors.
fullthrottle
10-21-2011, 06:58 AM
I just jammed sr20 clips onto them upside down
waxball88
10-21-2011, 07:37 AM
This doesnt work.
Only the Denso top feed pins and the subaru side feed pins interchange on the connectors.
The pins on my injecors are in there REALLY fucking tight.
gretz
10-21-2011, 07:40 AM
Shave the "tabs" off the side of the injectors (a dremel or W.H.Y) and the stock sr caps should slide right on...
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.