S13 Fog Lights

[XiaoAZN]

So I followed this tutorial on wiring up my fog lights:

HOW TO: S13 Fog Light Wiring : 240sx General Discussion (http://forums.nicoclub.com/how-to-s13-fog-light-wiring-t468396.html)

My lights worked for about 5 seconds, but now when I try and turn them on, 15a FR Fog fuse continuously blows. (The fuse in the drivers side fuse box)

I'm using an OEM fog light switch and I also have the blue relay. The wiring harness on my lights are also soldered correctly so I don't think it's shorting on my wiring harness.

What could be causing the fuse to keep blowing? I'm guessing a short, but do you guys know where it might be?

[c.boots]

I had the same issue when i hooked up my 180sx/chuki foglights up to the factory harness.
What i found out was one of the wires was grounding out inside the housing of the foglight causing it to blow the fuse.

[XiaoAZN]

Sorry, I'm pretty new to all of this electrical stuff. What do you mean by grounding inside the housing, and how did you fix it?

[Sr20Developer]

You will have to take apart the fog light itself and check for any exposed wires or connectors. I had the same problem with the fog lights on my car and i had to open them both up an wrap the connectors with electrical tape. Are you using oem or aftermarket lights