s14 motor with s13 transmission?

[manny(ΣAE)]

I wanted to know if you could put a s13 manual transmission on a s14 motor. I currently have have an auto on my s14 and wanted to know if this has been done or can it be done. Also, if it would be worth it. I have never driven a manual car so really dont want to wast alot of money on a new or used s14 transmission just to mess up the transmission.

[fliprayzin240sx]

Yes you can use the S13 transmission.

[Driftbandit]

Yes you can use the S13 transmission.

Remember the s14 trans has a crank sensor on the upper part of the d/s bellhousing that the s13 doesn't. I'm not sure if you can swap the bellhousings from A/T to M/T but you'll avoid the CEL if you can.

[Ravens14]

Did anyone have a follow up for this? I'm in the same situation. I have a s13 tranny sitting around and I want to do A trans swap in my s14

[georgeasorous]

i have a 95 ka with an 89 tranny it bolts right up the only difference is the sensors...
http://i126.photobucket.com/albums/p98/killrcoupe/s13trans-1_zps02240059.jpg (http://s126.photobucket.com/user/killrcoupe/media/s13trans-1_zps02240059.jpg.html)
http://i126.photobucket.com/albums/p98/killrcoupe/s14trans-1_zps173d5832.jpg (http://s126.photobucket.com/user/killrcoupe/media/s14trans-1_zps173d5832.jpg.html)

[Ravens14]

It will bolt up. I'm just worried that the missing crank angle sensor won't cause problems

[90drftsx]

Will the sensors from the s13 transmission plug right up to the s14 harness or would am i able to swap the sensors over? I would like to put a s13 auto trans into my 95 auto since its cheaper and easier to find.

[ShakotanGazelle]

Ive heard you can just drill the hole for the cas sensor on the bellhousing, or just find a bellhousing for an OBD2 car.

[90drftsx]

Thanks i still have the tranny off the s14 its just throwing a CEL because of the transmission. I can swap the bellhousings over. Just wondering if the harness plugs up to the sensors or if i can swap the sensors over.

[Frank_Jaeger]

Yes you can use the S13 transmission.
I thought you were inebriated or something but then I realized this is a few years old. I can only hope I become as angry in my time here.

[Riff_raff21]

Sorry to bump this thread. I'm doing the same thing. Do I have to get a s13 or s14 clutch for the s13 tranny. And how about the T/O bearing and fork, will the s13 one work just fine?

[ShakotanGazelle]

S13 clutch kit will work. They're the same.