Colored Vacuum Diagram for KA24DE, need help correcting!!!

[Katsumbhong]

After failing smog a second time (It was better than the last time, my friend's Omar and Amir helped me out with some good info and words of advice), I came to the conclusion that the vacuum lines were hooked up incorrectly by the previous owner. My EGR wasn't producing any vacuum, I was told that the EGR-BPT was bad, but I can't rule that out unless the vacuum lines are hooked up correctly.

I decided to put my fear of reading a vacuum diagram aside and color-code some from a shop manual I have in a PDF format.

I am not an expert when it comes to reading a vacuum diagram.

I color coded it the best I could. IF ANYTHING IS WRONG OR OFF, please let me know (or "save as" and open in MSPaint and re-do my hack job, and re-post)

Any can any emission/vacuum experts help me out here???


http://i19.photobucket.com/albums/b170/Guild_of_Gravity/Blogspot/ColoredVacuumHoseDrawing.jpg

http://i19.photobucket.com/albums/b170/Guild_of_Gravity/Blogspot/ColoredEngineandEmissionOverallSyst.jpg

[jonnybonds84]

I'm rebuilding my KA and I'm kinda stuck in this part too, can anyone chime in on this. COME ON DO IT!

[redsx13]

Katsumbhong, check your egr control solenoid, it regulates the amount of vacuum that the egr recieves.