Haltech Elite 1000 SR20DET P0373 Code - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Jason9011 · 09-22-2018, 12:59 PM

I'm having a issue getting my S13 Nissan 240sx with a Redtop SR20DET to fire up using the Elite 1000 with the plug and play harness. I've switched the jumpers around and went over the quick start guide about 10 times just to be sure I'm not missing anything (also changed the injector flow) Its cranks, almost fires, and then dies. Its throwing a P0373 code and I cant seem to find that much information on that other then its a timing code.

Also, I can plug my old Apexi Power FC back in and it will fire up right away. So I'm kind of lost on this now.

I've been in touch with Haltech (and the message board) and unfortunately their office in Kentucky has the same hours that I work. So I'm going to have to plan some time off so they can "remote in" and see what the issue is. Just figured I would ask around before I took some time off of work.

Any help?
Thanks!

derass · 09-22-2018, 03:25 PM

Have you synchronized the ignition timing (tooth offset & trigger angle settings)?

09-22-2018, 12:59 PM	#1
Jason9011 Leaky Injector Join Date: Mar 2011 Location: Chicago Posts: 134 Trader Rating: (11) Feedback Score: 11 reviews	Haltech Elite 1000 SR20DET P0373 Code I'm having a issue getting my S13 Nissan 240sx with a Redtop SR20DET to fire up using the Elite 1000 with the plug and play harness. I've switched the jumpers around and went over the quick start guide about 10 times just to be sure I'm not missing anything (also changed the injector flow) Its cranks, almost fires, and then dies. Its throwing a P0373 code and I cant seem to find that much information on that other then its a timing code. Also, I can plug my old Apexi Power FC back in and it will fire up right away. So I'm kind of lost on this now. I've been in touch with Haltech (and the message board) and unfortunately their office in Kentucky has the same hours that I work. So I'm going to have to plan some time off so they can "remote in" and see what the issue is. Just figured I would ask around before I took some time off of work. Any help? Thanks!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-22-2018, 03:25 PM	#2
derass Zilvia FREAK! Join Date: Jun 2010 Location: Toronto, ON Age: 33 Posts: 1,182 Trader Rating: (0) Feedback Score: 0 reviews	Have you synchronized the ignition timing (tooth offset & trigger angle settings)?