side parking lights - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

wav399 · 09-28-2001, 12:34 AM

I was wondering if anybody can tell me (again) how to change the bulbs on the side parking lights of a 93 240SX.  Do they slide off, pop off, or what?  

09-28-2001, 12:50 AM

I changed my bulb a little while ago.  You have to slide the reflector forward and then it comes loose.

*LanceS13* · 09-28-2001, 12:55 AM

Push them forward towards the bumper.  It may help to heat it with a blow dryer and use a razorblade to *carefully*separate the adhesive "gasket" from the body panel.  When it's loose push it forward about a 1/2" and the rear of the light should pop out, then just pull back and the light will come right out.  The actual bulbs twist into the back like most lights.  For some reason, the right and left lights are different.  One has a three prong "dovetail" while the other only has two.  If you're interested, check out the "Intalls" section on how to install some clear sidemarkers from a Mercedes ML320.

wav399 · 09-29-2001, 06:16 PM

thanks guys.

groundzero · 10-01-2001, 11:16 AM

I wanted to change my side lights to clearlights...But I was wondering if I bought a clear lens instead of the whole piece is that possible?

**West** · 10-01-2001, 11:35 AM

http://www.zilvia.net/pages/installs...rs/install.asp

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-28-2001, 12:34 AM	#1
wav399 Zilvia Member Join Date: Jun 2001 Posts: 196 Trader Rating: (0) Feedback Score: 0 reviews	I was wondering if anybody can tell me (again) how to change the bulbs on the side parking lights of a 93 240SX.  Do they slide off, pop off, or what?

09-28-2001, 12:50 AM	#2
Guest Posts: n/a	I changed my bulb a little while ago.  You have to slide the reflector forward and then it comes loose.

09-28-2001, 12:55 AM	#3
LanceS13 AutoX Junkie Join Date: Jun 2001 Location: MS Age: 39 Posts: 2,044 Trader Rating: (0) Feedback Score: 0 reviews	Push them forward towards the bumper.  It may help to heat it with a blow dryer and use a razorblade to carefullyseparate the adhesive "gasket" from the body panel.  When it's loose push it forward about a 1/2" and the rear of the light should pop out, then just pull back and the light will come right out.  The actual bulbs twist into the back like most lights.  For some reason, the right and left lights are different.  One has a three prong "dovetail" while the other only has two.  If you're interested, check out the "Intalls" section on how to install some clear sidemarkers from a Mercedes ML320.

09-29-2001, 06:16 PM	#4
wav399 Zilvia Member Join Date: Jun 2001 Posts: 196 Trader Rating: (0) Feedback Score: 0 reviews	thanks guys.

10-01-2001, 11:16 AM	#5
groundzero Zilvia Junkie Join Date: Sep 2001 Posts: 310 Trader Rating: (0) Feedback Score: 0 reviews	I wanted to change my side lights to clearlights...But I was wondering if I bought a clear lens instead of the whole piece is that possible?

10-01-2001, 11:35 AM	#6
West OMNOMNOMNOM Join Date: Dec 2000 Location: Denver, CO Age: 40 Posts: 6,456 Trader Rating: (0) Rides Gallery: West Feedback Score: 0 reviews	http://www.zilvia.net/pages/installs...rs/install.asp