Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > S Chassis

S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15.


Reply
 
Thread Tools Display Modes
Old 07-10-2014, 08:09 PM   #1
ferrero
Leaky Injector
 
Join Date: Feb 2013
Location: north Fl
Posts: 73
Trader Rating: (0)
ferrero is an unknown quantity at this point
Feedback Score: 0 reviews
s13 S13 no power interior!!!

Ok guys. Before I start I'm very sorry for the lengthy post but I want to be as detailed as possible



I'm completely stumped.
I bought a 93 s13 se hatch.. I'm in the middle of restoring it. so I pulled the dash, heater core assembly, blower motor, ac evap box, brake, clutch, and gas pedal. Basically everything from the firewall so I could clean off some surface rust and make sure I will have ac and heat.

I noticed I had a few wires broken on a plug by the blower motor, at the CD player plug. And a few wires rubbed on the bundle of wires running along the driver side rocker. That I still need to fix..

So long story short. I change the evap core and expansion valve. Clean the heater core and blower motor. And re foamed everything so it seals. After I put the dash support bar back in the car I wanted to make sure everything worked,

When I cleaned the fuse box due to corrosion. I replaced all the fuses with the led fuses that glow when they pop( in case of a short I know where it came from)

So I plug the blower motor in and threw a battery in to make sure it all works. As soon as I put the Battery in I heard the 'dinger' ding once and it popped the 10 amp room lamp fuse. So I put in a 15 amp. And it popped. When I went to a 25 amp and it didn't pop. So for shits and giggles I put a 10 a,p back in and it hasn't popped yet....

But nothing, absolutely nothing in the interior works.. No ac controls, dash lights, seat belts, windows, locks, dome lights. Nothing,.... I checked all the wires and only found the couple rubbed wires so I separated them from the rest so they don't touch. But still nothing.

But I have headlights, and the pop ups work. And something else weird is if I put the battery in the windshield wipers go up and down once. That's it, only once.

Please, please, please, someone help!!!!!!!!!!!!!!!!

I'm completely dumbfounded,

OH!!! also when I take he key out the ' dinger' keeps dinging..

Last edited by ferrero; 07-11-2014 at 04:10 AM..
ferrero is offline   Reply With Quote
Sponsored Links
Old 07-10-2014, 08:21 PM   #2
jacobs13
Zilvia FREAK!
 
jacobs13's Avatar
 
Join Date: May 2009
Location: Long Beach
Age: 29
Posts: 1,061
Trader Rating: (27)
jacobs13 is an unknown quantity at this point
Feedback Score: 27 reviews
you probably melted some wires putting a 25a fuse where a 10 goes. Very easily could have burnt up everything on that circuit. Never put a larger fuse than what is supposed to be there.
jacobs13 is offline   Reply With Quote
Old 07-11-2014, 03:22 AM   #3
ferrero
Leaky Injector
 
Join Date: Feb 2013
Location: north Fl
Posts: 73
Trader Rating: (0)
ferrero is an unknown quantity at this point
Feedback Score: 0 reviews
Could have, but I traced the wires from the fuse block and see no burned wires, rubbed or broken wires
ferrero is offline   Reply With Quote
Reply

Bookmarks

Tags
interior harness, s13, wire


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 03:28 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™