|
Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
|
Thread Tools | Display Modes |
08-31-2008, 11:37 AM | #1 |
Leaky Injector
|
gear oil for differentials
I will be using OEM Mitsubishi Diaqueen LSD Gear fluid SAE 90 for my EVO 9 transfer case and rear diff; however, I was wondering if I can use the same fluid for my S13 as well.
|
Sponsored Links |
08-31-2008, 11:42 AM | #2 | |
Post Whore!
Join Date: Apr 2004
Location: Virginia, USA
Posts: 5,764
Trader Rating: (5)
Feedback Score: 5 reviews
|
Quote:
On which component of the S13 do you want to use the Diaqueen? |
|
08-31-2008, 05:54 PM | #5 |
Leaky Injector
|
|
08-31-2008, 05:58 PM | #6 |
Leaky Injector
|
I just put some MT-90 in the tranny, but I want to use Diaqueen on my rear diff.
|
08-31-2008, 08:42 PM | #8 |
Post Whore!
Join Date: Apr 2004
Location: Virginia, USA
Posts: 5,764
Trader Rating: (5)
Feedback Score: 5 reviews
|
This is my personal recommendation. Keep in mind that a lot of people don't have experience with Evos, or cars in general. Take it for what it's worth.
If you have a stock diff, Nissan recommends GL5 75W, 80W, 75W-90, 80W-90, 85W, 90, or 140 depending on the temperature. 80W-90 is preferred for most temps below 104*F. Consult the FSM for more details. The Diaqueen is GL5 90. Nissan diffs are not as picky as Evos so you can use the Diaqueen if the temp is between freezing 32*F and 104*F. If you have an aftermarket diff, the manufacturer recommends only using their brand of LSD fluid. Cheap people like to use conventional GL5 80W-90 and Ford friction modifier. I don't recommend this route but you can if you're short on cash. My recommendation is conventional GL5 80W-90 for stock diffs and brand name LSD fluid (Kaaz, Tomei, etc.) for aftermarket diffs. Save your expensive Diaqueen for your Evo. Others please feel free to comment. |
08-31-2008, 10:47 PM | #9 |
Leaky Injector
Join Date: Jun 2008
Location: Pennsylvania
Age: 38
Posts: 109
Trader Rating: (0)
Feedback Score: 0 reviews
|
I'm running 75w-90 Mobil 1 syn. In my Stock Rear Diff. right now. Eventually when I get my J30 installed will probably switch over to the Redline.
__________________
Just Cause it's the holidays doesnt mean you have to drive like an A**! |
09-01-2008, 10:30 AM | #10 | |
Zilvia Member
|
Quote:
Redline is GL-5 and will modify to 75-140 when hot. |
|
09-01-2008, 11:29 AM | #11 |
Zilvia Junkie
|
No it doesnt have friction modifier in it. You have purchase it seperatly.
__________________
www.massimopower.com PH: 1(951)402-5386 EM:[email protected] Special Thanks To: www.aeperformance.com www.domospeed.com/blog For Their Continued Support |
09-02-2008, 05:12 PM | #12 |
Leaky Injector
|
wait a minute, I thought MT-90 is the best fluid for our tranny. anyone else have had problems with the fluid? If so, I may switch to shockproof heavy duty, but I read that it was not good for our tranny long term.
|
11-02-2008, 09:09 PM | #13 |
Leaky Injector
Join Date: Sep 2004
Location: Florida
Age: 46
Posts: 104
Trader Rating: (2)
Feedback Score: 2 reviews
|
hey there is ton of information as not to use GL-5 on Nissan Transmissions here is the why
" What happens if API GL-5 gear oil is used in an API GL-4 gear oil application? API GL-4 and API GL-5 products typically use the same extreme pressure (EP) additive system, with the API GL-5 having about twice the concentration of a API GL-4. In service, these additives become active under extreme load and temperature when the protective oil film can be squeezed away. EP additives work by forming wear-resistant compounds with the metal of the gear tooth surface. As the gears mesh, these compounds shield the gear teeth from direct metal-to-metal contact that would cause wear and damage to the gears. If too little of the active additive is present, proper protection would be compromised. Too much of this additive could cause excessive chemical corrosion of the gear surface. If an API GL-5 gear oil is used in a application where API GL-4 gear oil is called for, chemical corrosion of "yellow metal" components may occur, such as bronze synchronizers, brass bushings, etc. This may lead to shifting difficulties or shortened equipment life." basically it will eat non ferrous metals inside your transmission(on a SR20det set up) switched to MT90 on the other transmission 2 years of abuse never ever broke down redline,amsoil,castrol have GL-4 and some others |
11-03-2008, 05:32 AM | #15 | |
Post Whore!
Join Date: Apr 2004
Location: Virginia, USA
Posts: 5,764
Trader Rating: (5)
Feedback Score: 5 reviews
|
Quote:
On my Evo, when I talked to RedLine they recommended a specific ratio of their fluids to achieve the recommended viscosity for the gearbox. |
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|