T25 and T28 Polished Aluminum Intakes, round 2!! as low as $50 shipped! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Pepperoni · 03-09-2006, 04:01 PM

PipingPro.com Group Buy - Pro Intakes

The last group buy was very successful and I chose to continue these for a new group buy!

I am custom making these pipes for your T25 or T28. The stock rubber piece has a spiral looking thing inside that is supposed to help keep the intake from collapsing under boost, and keep the spool noise down.
You no longer have to worry about that!
This 2.5" aluminum pipe allows you to clearly hear your turbo spool louder!! Plus, (if your BOV is near the intake) you no longer have to sacrifice performance for sound -- if you recirculate with a custom pipe, you no longer just hear a "swoosh" like you did with the stock piece, but it will sound closer to the way it was meant to be heard!! My greddy type s bov is still loud recirculated, unlike when it used to be run with the rubber piece.

Free up some HP, help your turbo breathe and hear that baby spool!!

Here are a couple of pics taken from the last group buy:

T25:

T28:

GTiR T28

Kits come with blue Option Racing couplers and clamps, hose for catch can (if applicable), two brackets for bracing, and your chosen polished aluminum intake pipe.

Pricing:
These prices all include shipping (which costs about $10-12)

T25
Kit 1 -- Intake pipe with catch can bung: $60 shipped
Kit 2 -- Intake pipe with catch can bung and BOV recirculation bung: $70 shipped
Kit 3 -- Intake with BOV recirculation bung: $65 shipped
Contact me if you want a bungless pipe.

T28
Kit 1 -- Intake pipe, no bungs: $50 shipped
Kit 2 -- Intake pipe with catch can bung: $55 shipped
Kit 3 -- Intake pipe with BOV recirculation bung: $60 shipped

Catch can bung sizes:
Please tell me which size you want me to use. I have three sizes, 10mm, 12.7mm (1/2 inch), and stock size 19.05mm (3/4 inch).

Z32 MAFS Owners:
I can supply a coupler reducer for your MAFS. The cheapest I've seen is on ebay and they're $9, but i will offer them for only $6.50. Just add that to the total.

Upgrade to T-Bolt clamps: Add $6 to the total for two stainless steel t-bolt clamps. $12 for four t-bolt clamps.

Air filters:
We are offering air filters as well. Just add $20 to the order. For info please go to http://www.pipingpro.com

Important:
Keep in mind that these are all custom made, and are done to the best of my ability. To get the best possible outcome, it would be very helpful if you provided pictures of your setup (ESPECIALLY if what is involved is very intricate). When ordering, make sure you let me know what MAFS you're using, possibly air filter, and where your BOV/catch tank is located, along with some pictures if possible.

I prefer PayPal but will accept Money Order.

-Aure

REDSH!FT · 03-09-2006, 08:39 PM

Are these made to order and shipped out or is there a wait?

95zilvia · 03-09-2006, 08:43 PM

I've been meaning to drive to you to pick one up!...
Maybe someday.

Pepperoni · 03-09-2006, 08:59 PM

Quote:

Originally Posted by REDSH!FT

Are these made to order and shipped out or is there a wait?

There is a general wait time of one week. I ask buyers to give me about a week for me to complete a pipe, but it generally doesn't take that long. Oh and for this group buy, you don't need to wait for a certain amount of people to buy in. It's an ongoing deal

Quote:

Originally Posted by 95zilvia

I've been meaning to drive to you to pick one up!...
Maybe someday.

just let me know! i could always just ship it to you

WILDACEX187 · 03-09-2006, 09:04 PM

man i gotta get my engine in my car so i can get one of these already. save one for me pepperoni!!! lol

bcrume · 03-09-2006, 09:12 PM

where are you located?

Pepperoni · 03-09-2006, 09:25 PM

Quote:

Originally Posted by WILDACEX187

man i gotta get my engine in my car so i can get one of these already. save one for me pepperoni!!! lol

hurry up with the swap! this deal won't last forever!

Quote:

Originally Posted by bcrume

where are you located?

Sent you a PM

REDSH!FT · 03-10-2006, 01:52 PM

How do we go about placing an order with you? I would like to order one for my car.

Pepperoni · 03-10-2006, 02:03 PM

Quote:

Originally Posted by REDSH!FT

How do we go about placing an order with you? I would like to order one for my car.

I sent you a PM - For everyone else, just PM me or email me with info on your setup and any additional info you think I should know about. You can send payment whenever you want, but I do want to quickly discuss the locations of the bungs on the pipe (if any) to make sure you're getting what you want.

*slider2828* · 03-10-2006, 02:24 PM

YGPM thanks again for a cool product.

Alexe · 03-10-2006, 05:37 PM

hey man. just checking in making sure you didnt forget about me. i sent in my payment on mar 1st.

Pepperoni · 03-10-2006, 05:45 PM

Quote:

Originally Posted by Alexe

hey man. just checking in making sure you didnt forget about me. i sent in my payment on mar 1st.

Hey,
Nope I didn't forget about you. I might of forgotten to email you the tracking info. I'll PM it to you. I shipped out the intake days ago, you should receive it soon.

boosteds13 · 03-10-2006, 10:52 PM

Just curious on the difference between the T25 and T28 pipe. I have a T25 now, but it will only be on for a couple months til I get a T28. I am assuming it has something to do with the compressor inlet piece? If so, I was planning on reusing that with the T28, so should I just order the T25 one?

Pepperoni · 03-10-2006, 11:02 PM

Quote:

Originally Posted by boosteds13

Just curious on the difference between the T25 and T28 pipe. I have a T25 now, but it will only be on for a couple months til I get a T28. I am assuming it has something to do with the compressor inlet piece? If so, I was planning on reusing that with the T28, so should I just order the T25 one?

Yup you're right. The difference is in the turbo inlet. The T28 intake pipe has one bend while the T25 intake pipe has two bends. If you're going to be using the T25 inlet, then you should get the T25 intake pipe.

ca18det_boy · 03-11-2006, 09:05 AM

How long is this going on for?

dizbjello · 03-11-2006, 11:57 AM

just got mine the other day and it looks great!

TechImportz1 · 03-11-2006, 01:15 PM

i need to pay you... PM me the information... Thanks

Pepperoni · 03-12-2006, 01:00 AM

I'm not sure how long this group buy will be going for yet..

i'm going on vacation from 3/18 to 3/25 (one week), so I won't be able to do any pipes that week. I will be accepting payments probably until 3/15 (wednesday). If ordered by wednesday, i'll be sure to ship them all out before I leave. i will be answering emails and such. If you decide to order during the week that I am gone, I will make the pipes on a first come first serve basis. so if you put in your order first, you'll be the first to get their pipe once i return

boosteds13 · 03-13-2006, 03:52 PM

Just sent payment for a T25 kit w/bung and MAFS coupler. Forgot to include in the payment the size for the bung. 1/2" should be good as its the closest to the size of the port on the valve cover on my CA18.

KiDyNomiTe · 03-13-2006, 06:03 PM

For the T28 kit, what t28 is it? S15 or S14. I have an s15 t28 using t25 inlet, just wondering if it will fit right. AFAIK they point differently but due to the ribbed pipe it can bend a little.

Pepperoni · 03-13-2006, 07:25 PM

Quote:

Originally Posted by KiDyNomiTe

For the T28 kit, what t28 is it? S15 or S14. I have an s15 t28 using t25 inlet, just wondering if it will fit right. AFAIK they point differently but due to the ribbed pipe it can bend a little.

Hi,
The T28 intake applies to both S15 and S14, because S15 inlet=S14 minus the extra bung the S15 inlet has. If you're using the T25 inlet, you should be getting the T25 intake.

KiDyNomiTe · 03-13-2006, 10:20 PM

66.50 sent for t25 kit with stock bung, z32 mafs

Pepperoni · 03-16-2006, 12:44 PM

Thanks I will be sending you tracking info once it's shipped!

i'll accept last min payments today and will be shipped out by tomorrow. If not you'll have to wait another week until i get back!

boosteds13 · 03-17-2006, 09:53 AM

I got mine and it looks great, but is it supposed to be really loose where it attaches to the inlet piece on the turbo (where the coupler attaches to the turbo inlet pipe)?

Pepperoni · 03-17-2006, 12:32 PM

No not at all. Try attaching/tightening the coupler on the inlet first alone, then connect the pipe and tighten it, or vice versa. Make sure the clamp is holding the whole coupler and not half of it. It's easier if you connect the coupler first and clamp it alone to be sure you put it on correctly.

ca18det_boy · 03-17-2006, 02:48 PM

Just sent in the payment!

boosteds13 · 03-17-2006, 08:58 PM

Yeah, I got it on there... I just meant that the coupler slides over the inlet pipe very easily. But once you clamp it down, it's fine.

Pic for everyone!

REDSH!FT · 03-17-2006, 10:39 PM

Just wanted to chime in and give props where they are due.

I paid on March 10. By March 16th I had already missed 1 delivery because I didn't realize it was going to come so soon...so no one was home to receive it!

Pipe looks awesome, great price for great goods. The silicon couplers could be a little better but that's not a huge deal. I would have paid the same $60 for just the pipe and hardware kit.

Thanks a bunch Aure!

EVERYONE should buy one of these for their SR...Don't waste your time w/ a filter on your POS accordian intake pipe!

Grey240Drift · 03-20-2006, 01:00 PM

Hurry and get back! I will buy one of these when you return.

ca18det_boy · 03-20-2006, 06:14 PM

HAHAHAHA damn, I paid for this last thursday and recieved it bright and early this morning! This guy has super fast freakin shipping and it looks pretty sweet to boot!

03-09-2006, 04:01 PM	#1
Pepperoni Zilvia Addict Join Date: Jun 2003 Location: norcal Posts: 750 Trader Rating: (0) Feedback Score: 0 reviews	T25 and T28 Polished Aluminum Intakes, round 2!! as low as $50 shipped! PipingPro.com Group Buy - Pro Intakes The last group buy was very successful and I chose to continue these for a new group buy! I am custom making these pipes for your T25 or T28. The stock rubber piece has a spiral looking thing inside that is supposed to help keep the intake from collapsing under boost, and keep the spool noise down. You no longer have to worry about that! This 2.5" aluminum pipe allows you to clearly hear your turbo spool louder!! Plus, (if your BOV is near the intake) you no longer have to sacrifice performance for sound -- if you recirculate with a custom pipe, you no longer just hear a "swoosh" like you did with the stock piece, but it will sound closer to the way it was meant to be heard!! My greddy type s bov is still loud recirculated, unlike when it used to be run with the rubber piece. Free up some HP, help your turbo breathe and hear that baby spool!! Here are a couple of pics taken from the last group buy: T25: T28: GTiR T28 Kits come with blue Option Racing couplers and clamps, hose for catch can (if applicable), two brackets for bracing, and your chosen polished aluminum intake pipe. Pricing: These prices all include shipping (which costs about $10-12) T25 Kit 1 -- Intake pipe with catch can bung: $60 shipped Kit 2 -- Intake pipe with catch can bung and BOV recirculation bung: $70 shipped Kit 3 -- Intake with BOV recirculation bung: $65 shipped Contact me if you want a bungless pipe. T28 Kit 1 -- Intake pipe, no bungs: $50 shipped Kit 2 -- Intake pipe with catch can bung: $55 shipped Kit 3 -- Intake pipe with BOV recirculation bung: $60 shipped Catch can bung sizes: Please tell me which size you want me to use. I have three sizes, 10mm, 12.7mm (1/2 inch), and stock size 19.05mm (3/4 inch). Z32 MAFS Owners: I can supply a coupler reducer for your MAFS. The cheapest I've seen is on ebay and they're $9, but i will offer them for only $6.50. Just add that to the total. Upgrade to T-Bolt clamps: Add $6 to the total for two stainless steel t-bolt clamps. $12 for four t-bolt clamps. Air filters: We are offering air filters as well. Just add $20 to the order. For info please go to http://www.pipingpro.com Important: Keep in mind that these are all custom made, and are done to the best of my ability. To get the best possible outcome, it would be very helpful if you provided pictures of your setup (ESPECIALLY if what is involved is very intricate). When ordering, make sure you let me know what MAFS you're using, possibly air filter, and where your BOV/catch tank is located, along with some pictures if possible. I prefer PayPal but will accept Money Order. -Aure

03-09-2006, 09:04 PM	#5
WILDACEX187 Post Whore! Join Date: Jan 2003 Location: QUEENZ, NYC Age: 38 Posts: 3,103 Trader Rating: (4) Feedback Score: 4 reviews	man i gotta get my engine in my car so i can get one of these already. save one for me pepperoni!!! lol __________________ SR POWA COUPE LUVVV!!!

03-10-2006, 10:52 PM	#13
boosteds13 Zilvia Addict Join Date: Nov 2003 Location: Port Orange, FL Posts: 623 Trader Rating: (0) Rides Gallery: boosteds13 Feedback Score: 0 reviews	Just curious on the difference between the T25 and T28 pipe. I have a T25 now, but it will only be on for a couple months til I get a T28. I am assuming it has something to do with the compressor inlet piece? If so, I was planning on reusing that with the T28, so should I just order the T25 one? __________________ "A CA? WTF is that? You shoulda got an SR yo." View my vBPicGallery!

03-11-2006, 09:05 AM	#15
ca18det_boy Join Date: Jan 2004 Location: camarillo, ca Age: 38 Posts: 25 Trader Rating: (1) Feedback Score: 1 reviews	How long is this going on for? __________________

03-11-2006, 11:57 AM	#16
dizbjello Leaky Injector Join Date: Dec 2004 Location: in the middle of no where (KS) Posts: 99 Trader Rating: (0) Feedback Score: 0 reviews	just got mine the other day and it looks great! __________________

03-09-2006, 08:39 PM	#2
REDSH!FT Zilvia Junkie Join Date: Jul 2005 Location: Fairfax County VA Posts: 376 Trader Rating: (0) Feedback Score: 0 reviews	Are these made to order and shipped out or is there a wait?

03-09-2006, 08:43 PM	#3
95zilvia Nissanaholic! Join Date: Jun 2003 Location: South San Francisco Age: 37 Posts: 1,860 Trader Rating: (0) Rides Gallery: 95zilvia Feedback Score: 0 reviews	I've been meaning to drive to you to pick one up!... Maybe someday.

03-09-2006, 09:12 PM	#6
bcrume Zilvia Member Join Date: Apr 2004 Location: San Jose, CA Posts: 177 Trader Rating: (0) Feedback Score: 0 reviews	where are you located?

03-10-2006, 01:52 PM	#8
REDSH!FT Zilvia Junkie Join Date: Jul 2005 Location: Fairfax County VA Posts: 376 Trader Rating: (0) Feedback Score: 0 reviews	How do we go about placing an order with you? I would like to order one for my car.

03-10-2006, 02:24 PM	#10
slider2828 Premium Member Join Date: Oct 2004 Location: San Francisco, CA Posts: 5,824 Trader Rating: (13) Feedback Score: 13 reviews	YGPM thanks again for a cool product.

03-10-2006, 05:37 PM	#11
Alexe Join Date: Dec 2005 Location: Canada Posts: 21 Trader Rating: (0) Feedback Score: 0 reviews	hey man. just checking in making sure you didnt forget about me. i sent in my payment on mar 1st.

03-11-2006, 01:15 PM	#17
TechImportz1 Zilvia Junkie Join Date: Sep 2005 Location: Ozone Park, NY Posts: 307 Trader Rating: (0) Feedback Score: 0 reviews	i need to pay you... PM me the information... Thanks __________________ Contact Info: Tel: 718-888-9832

03-12-2006, 01:00 AM	#18
Pepperoni Zilvia Addict Join Date: Jun 2003 Location: norcal Posts: 750 Trader Rating: (0) Feedback Score: 0 reviews	I'm not sure how long this group buy will be going for yet.. i'm going on vacation from 3/18 to 3/25 (one week), so I won't be able to do any pipes that week. I will be accepting payments probably until 3/15 (wednesday). If ordered by wednesday, i'll be sure to ship them all out before I leave. i will be answering emails and such. If you decide to order during the week that I am gone, I will make the pipes on a first come first serve basis. so if you put in your order first, you'll be the first to get their pipe once i return

03-13-2006, 03:52 PM	#19
boosteds13 Zilvia Addict Join Date: Nov 2003 Location: Port Orange, FL Posts: 623 Trader Rating: (0) Rides Gallery: boosteds13 Feedback Score: 0 reviews	Just sent payment for a T25 kit w/bung and MAFS coupler. Forgot to include in the payment the size for the bung. 1/2" should be good as its the closest to the size of the port on the valve cover on my CA18. __________________ "A CA? WTF is that? You shoulda got an SR yo." View my vBPicGallery!

03-13-2006, 06:03 PM	#20
KiDyNomiTe Post Whore! Join Date: Mar 2002 Location: Chicago Age: 35 Posts: 6,296 Trader Rating: (0) Rides Gallery: KiDyNomiTe Feedback Score: 0 reviews	For the T28 kit, what t28 is it? S15 or S14. I have an s15 t28 using t25 inlet, just wondering if it will fit right. AFAIK they point differently but due to the ribbed pipe it can bend a little. __________________ PROCEED Grip Gambler

03-13-2006, 10:20 PM	#22
KiDyNomiTe Post Whore! Join Date: Mar 2002 Location: Chicago Age: 35 Posts: 6,296 Trader Rating: (0) Rides Gallery: KiDyNomiTe Feedback Score: 0 reviews	66.50 sent for t25 kit with stock bung, z32 mafs __________________ PROCEED Grip Gambler

03-16-2006, 12:44 PM	#23
Pepperoni Zilvia Addict Join Date: Jun 2003 Location: norcal Posts: 750 Trader Rating: (0) Feedback Score: 0 reviews	Thanks I will be sending you tracking info once it's shipped! i'll accept last min payments today and will be shipped out by tomorrow. If not you'll have to wait another week until i get back!

03-17-2006, 09:53 AM	#24
boosteds13 Zilvia Addict Join Date: Nov 2003 Location: Port Orange, FL Posts: 623 Trader Rating: (0) Rides Gallery: boosteds13 Feedback Score: 0 reviews	I got mine and it looks great, but is it supposed to be really loose where it attaches to the inlet piece on the turbo (where the coupler attaches to the turbo inlet pipe)? __________________ "A CA? WTF is that? You shoulda got an SR yo." View my vBPicGallery!

03-17-2006, 12:32 PM	#25
Pepperoni Zilvia Addict Join Date: Jun 2003 Location: norcal Posts: 750 Trader Rating: (0) Feedback Score: 0 reviews	No not at all. Try attaching/tightening the coupler on the inlet first alone, then connect the pipe and tighten it, or vice versa. Make sure the clamp is holding the whole coupler and not half of it. It's easier if you connect the coupler first and clamp it alone to be sure you put it on correctly.

03-17-2006, 02:48 PM	#26
ca18det_boy Join Date: Jan 2004 Location: camarillo, ca Age: 38 Posts: 25 Trader Rating: (1) Feedback Score: 1 reviews	Just sent in the payment! __________________

03-17-2006, 08:58 PM	#27
boosteds13 Zilvia Addict Join Date: Nov 2003 Location: Port Orange, FL Posts: 623 Trader Rating: (0) Rides Gallery: boosteds13 Feedback Score: 0 reviews	Yeah, I got it on there... I just meant that the coupler slides over the inlet pipe very easily. But once you clamp it down, it's fine. Pic for everyone! __________________ "A CA? WTF is that? You shoulda got an SR yo." View my vBPicGallery!

03-17-2006, 10:39 PM	#28
REDSH!FT Zilvia Junkie Join Date: Jul 2005 Location: Fairfax County VA Posts: 376 Trader Rating: (0) Feedback Score: 0 reviews	Just wanted to chime in and give props where they are due. I paid on March 10. By March 16th I had already missed 1 delivery because I didn't realize it was going to come so soon...so no one was home to receive it! Pipe looks awesome, great price for great goods. The silicon couplers could be a little better but that's not a huge deal. I would have paid the same $60 for just the pipe and hardware kit. Thanks a bunch Aure! EVERYONE should buy one of these for their SR...Don't waste your time w/ a filter on your POS accordian intake pipe!

03-20-2006, 01:00 PM	#29
Grey240Drift Join Date: Dec 2002 Location: Michigan Age: 36 Posts: 49 Trader Rating: (0) Feedback Score: 0 reviews	Hurry and get back! I will buy one of these when you return.

03-20-2006, 06:14 PM	#30
ca18det_boy Join Date: Jan 2004 Location: camarillo, ca Age: 38 Posts: 25 Trader Rating: (1) Feedback Score: 1 reviews	HAHAHAHA damn, I paid for this last thursday and recieved it bright and early this morning! This guy has super fast freakin shipping and it looks pretty sweet to boot! __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode