View Full Version : Trying to take out injectors.
twelvea
06-27-2005, 07:52 AM
Ok im trying to take out my injectors(I searched and nothing), HOW THE HELL IS THIS DONE, killme I cant get them out, I broke some of the plastic off so I stoped, Im trying to take them out to put some 370s in, also if I put in 370's with out anything else will in not run right??
skatanic28
06-27-2005, 07:58 AM
you need some sort of fuel control to use those injectors. (safc, ecu tune, e-manage)
for the injectors.....i ended up threading the cap screws in about halfway and using the indents in the side of the injector top to pry them out. nothing broke that way and it only took like 5 minutes.
twelvea
06-27-2005, 08:25 AM
hmm wa u mean take them out with the caps on??? how?
96twofourty
06-27-2005, 08:50 AM
you take off the caps (metal pieces held on with two screws) then you twist and pull the injectors straight up
skatanic28
06-28-2005, 12:13 AM
hmm wa u mean take them out with the caps on??? how?
i took the caps off, then threaded the screws back in about half way. then you can get some leverage with a small screwdriver and lift em out.
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.