View Full Version : need s14 help
teruya01
04-18-2005, 11:13 PM
i want to take off the side DOOR molding. how is it connected to the door?
NemeGuero
04-18-2005, 11:16 PM
sell it to me.. haha they are all push clips and the ends have caps which cover screws inside the wheel well
but seriously.. I'll buy them
projectRDM
04-19-2005, 03:17 AM
Screws in the wheel well that secure door moulding? You been smoking crack again?
The door waist moulding is secured with one screw at the back edge by the window, then it pulls straight up, there's retaining clips every few inches.
NemeGuero
04-19-2005, 03:25 AM
yeup, crack is a helluva drug..
I didn't know s14s had those.. I don't have 'em and I'm SE.. thought he meant the side skirts.. =/
teruya01
04-19-2005, 12:18 PM
ok....soooo am i going to have to take it to a body shop? and get it shaved and painted agian? or can i just take the bugger off? im honeslty took scared just to rip it off, without knowing anything
ScottMan
04-19-2005, 12:31 PM
If you're just planning to take it off and have it look perfectly smooth, yes, you'll have to get the holes filled in and repainted. It's going to leave 4-5 holes in your door sill. What are you scared off? Remove the screw and slowly pull up every few inches until the clips release. If you're scared to pull a door molding off you're probably in the wrong hobby.
projectRDM
04-19-2005, 07:42 PM
You guys have fucked the thread to hell and back. Why would you want to shave the door mouldings? You need them for one thing, and the car will look like ass without them.
If you're talking about the sideskirts, use the correct fucking terminology.
ScottMan
04-19-2005, 07:46 PM
^Hey Russ, it's not my job to tell him it'll look awful and be stupid...that's your job.
NemeGuero
04-20-2005, 03:10 AM
he meant door trim.. to prevent door dings in parking lots.. it was my mistake at first that probably threw everyone off.. my bad
projectRDM
04-20-2005, 09:28 AM
he meant door trim.. to prevent door dings in parking lots.. it was my mistake at first that probably threw everyone off.. my bad
And there it is.
OE did not supply door trim (body side moulding) on any model 240SX, ever. It's either dealer installed or some fool owner stuck it on. 99% of what's fitted these days is just adhesive mounted. My 93 Altima GXE had them and I pulled them right off on a hot day.
KOUKI KA-T
04-20-2005, 09:56 AM
What molding?? :loco:
Phlip
04-20-2005, 11:36 AM
And there it is.
OE did not supply door trim (body side moulding) on any model 240SX, ever. It's either dealer installed or some fool owner stuck it on. 99% of what's fitted these days is just adhesive mounted. My 93 Altima GXE had them and I pulled them right off on a hot day.
^^^ Yeah, what he said, or keep in mind that a heat gun can be had for dirt cheap, I got a Miller Electric one at Home Depot for like 15 bucks
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.