Custom built Volk gt-c - 17x9 +13 5x114.3

[stevenrapids]

Bought these from YAJ as 17x7 + 37 wheels. After receiving them I had them cut and milled by a local machine shop. I then ordered new blank 17x4 lips and had the machine shop bore the inner lips to match the faces/barrels and had them drill the bolt holes. Faces are type 1(flat) and are the original finish. No major scratches but do show some age. New wheel hardware was used as the original bolts were not long enough. These were not re-welded, but if that is a concern it shouldn?t be hard to have a local welder weld them if you so desire. They are sealed and ready for tires otherwise.

17x9 +13 5x114.3
Come with a brand new full set of shank specific lugs that are not Volk branded but came from a vendor out of Japan.
Can include 2 brand new federal 595ss 235/40 tires if local.
Shipping at buyers expense.

Located in Dayton, Oh

$2200obo

Best way to reach me is via text @ 937-681-4516 - Steven

https://farm66.staticflickr.com/65535/51081450666_885814c979_c.jpg

https://farm66.staticflickr.com/65535/51080753778_2e631ef4be_c.jpg

https://farm66.staticflickr.com/65535/51081568452_0ce8f5b9bd_c.jpg

[andisan]

Good job

Those came out clean and perfect offset

Glws


Sent from my iPhone using Tapatalk

[TollieLifted]

Nice wheels. Bump for fellow Daytonian

[derek king]

good lord these are the move

[TheRealSy90]

Does the face flange actually support both flanges of the lip and barrel? Usually it's only deep enough for one flange thus why they are welded.

[stevenrapids]

Sold locally

And the face flange did not cover the whole inside flange of the barrel, so i would recommend running a bead along the inner barrel and face flange if planning to build a set in the future.