OH Custom built Volk gt-c - 17x9 +13 5x114.3 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

stevenrapids · 03-29-2021, 06:57 AM

Bought these from YAJ as 17x7 + 37 wheels. After receiving them I had them cut and milled by a local machine shop. I then ordered new blank 17x4 lips and had the machine shop bore the inner lips to match the faces/barrels and had them drill the bolt holes. Faces are type 1(flat) and are the original finish. No major scratches but do show some age. New wheel hardware was used as the original bolts were not long enough. These were not re-welded, but if that is a concern it shouldn?t be hard to have a local welder weld them if you so desire. They are sealed and ready for tires otherwise.

17x9 +13 5x114.3
Come with a brand new full set of shank specific lugs that are not Volk branded but came from a vendor out of Japan.
Can include 2 brand new federal 595ss 235/40 tires if local.
Shipping at buyers expense.

Located in Dayton, Oh

$2200obo

Best way to reach me is via text @ 937-681-4516 - Steven

andisan · 03-29-2021, 09:42 AM

Good job

Those came out clean and perfect offset

Glws

Sent from my iPhone using Tapatalk

TollieLifted · 04-05-2021, 11:42 AM

Nice wheels. Bump for fellow Daytonian

derek king · 05-10-2021, 05:55 AM

good lord these are the move

*TheRealSy90* · 05-10-2021, 09:49 AM

Does the face flange actually support both flanges of the lip and barrel? Usually it's only deep enough for one flange thus why they are welded.

stevenrapids · 05-13-2021, 06:36 AM

Sold locally

And the face flange did not cover the whole inside flange of the barrel, so i would recommend running a bead along the inner barrel and face flange if planning to build a set in the future.

03-29-2021, 06:57 AM	#1
stevenrapids Zilvia Junkie Join Date: Oct 2010 Location: Dayton, Oh Age: 29 Posts: 445 Trader Rating: (7) Feedback Score: 7 reviews	Custom built Volk gt-c - 17x9 +13 5x114.3 Bought these from YAJ as 17x7 + 37 wheels. After receiving them I had them cut and milled by a local machine shop. I then ordered new blank 17x4 lips and had the machine shop bore the inner lips to match the faces/barrels and had them drill the bolt holes. Faces are type 1(flat) and are the original finish. No major scratches but do show some age. New wheel hardware was used as the original bolts were not long enough. These were not re-welded, but if that is a concern it shouldn?t be hard to have a local welder weld them if you so desire. They are sealed and ready for tires otherwise. 17x9 +13 5x114.3 Come with a brand new full set of shank specific lugs that are not Volk branded but came from a vendor out of Japan. Can include 2 brand new federal 595ss 235/40 tires if local. Shipping at buyers expense. Located in Dayton, Oh $2200obo Best way to reach me is via text @ 937-681-4516 - Steven __________________ [email protected]_fingers 350z for sale

03-29-2021, 09:42 AM	#2
andisan Nissanaholic! Join Date: Oct 2007 Location: Lompoc CA 805!!!! Age: 37 Posts: 2,048 Trader Rating: (12) Feedback Score: 12 reviews	Good job Those came out clean and perfect offset Glws Sent from my iPhone using Tapatalk __________________

05-10-2021, 05:55 AM	#4
derek king Nissanaholic! Join Date: May 2007 Location: in Age: 34 Posts: 1,959 Trader Rating: (6) Feedback Score: 6 reviews	good lord these are the move __________________ IG DearDerekKing

05-13-2021, 06:36 AM	#6
stevenrapids Zilvia Junkie Join Date: Oct 2010 Location: Dayton, Oh Age: 29 Posts: 445 Trader Rating: (7) Feedback Score: 7 reviews	Sold locally And the face flange did not cover the whole inside flange of the barrel, so i would recommend running a bead along the inner barrel and face flange if planning to build a set in the future. __________________ [email protected]_fingers 350z for sale

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-05-2021, 11:42 AM	#3
TollieLifted Leaky Injector Join Date: Apr 2011 Location: midwest Posts: 120 Trader Rating: (3) Feedback Score: 3 reviews	Nice wheels. Bump for fellow Daytonian