s13 with sr20det with apexi pfc idling problem!

[MasEkapses]

Hello guys i have a sr20det build mated with the power fc. My problem is i cannot get the idling rpm under 1300. As soon as i command lower rpms the car is hunting like mad. i did the idling learning procedure a few times with no avail. I tried to manually set the idle through the idle screw but the screw seems to have no effect on the car. i looked for a vacuum leak but there is none. can it be that the apexi cannot handle the idling of the sr20det? Thanks!

[jedi03]

have you tried adjusting the throttle plate? any codes set?

[MasEkapses]

yes i tried also with the throttle plate no effect either. What makes me mad is that the idle was perfect with the oem ecu.

[S14rebuild]

"Apparently" power fc setting for idle is a pain in the ass...so i was told qnd explained...ull need someone to tune the idle...

[MasEkapses]

Perhaps a forum member that has done it here. Because there isnt any tuner in germany that works with apexi pfc as i asked around.

[S14rebuild]

Kingtal0n.....pm him

[MasEkapses]

Thanks i will send him a pm!