SR20DET bottom mount turbo manifold

[Jarom717]

Looking for a good manifold. I was looking at DOC and Full Race but it seems like both bottom mount versions are discontinued. I dont really want to go Tomei, especially since most vendors sell TomeiUSA now. But if I have to then I will. Ofcourse I dont want a ISR/Megan/ebay one either. Just posting on here to see if anyone has anything tucked away. I got a GTX2867R gen2 turbo with IWG so dont want an external wastegate port on the manifold. Lmk

Sent from my SM-G973U1 using Tapatalk

[TheRealSy90]

Silk Road x 3UP Collab long runner stock location manifold. I got one a few weeks ago, hopefully it sounds rowdy.

Made with custom 3mm wall thickness, drawn stainless piping. Literally material that can't be bought they have it made specifically for this manifold lol. Compared to rolled 1.5mm piping of other "popular" manifold brands this is going to be much stronger. I'd still make sure you have good mounts, hardware, and a flex section on the downpipe.

Beware it does not clear the valve cover "T" on the s13 sr unless you modify it.

http://www.e-3up.com/archives/1843

http://silkroad-jp.com/wpblog/2018/07/27/sr20manifold/

https://i1.wp.com/silkroad-jp.com/wpblog/wp-content/uploads/2017/08/SR.jpg?resize=768%2C455

Comparison to the traditional style.

https://i0.wp.com/silkroad-jp.com/wpblog/wp-content/uploads/2018/07/44.jpg?w=599

https://i2.wp.com/silkroad-jp.com/wpblog/wp-content/uploads/2018/07/oz.jpg?w=603

oIv_zsDO4T0

[Jarom717]

Silk Road x 3UP Collab long runner stock location manifold. I got one a few weeks ago, hopefully it sounds rowdy.

Made with custom 3mm wall thickness, drawn stainless piping. Literally material that can't be bought they have it made specifically for this manifold lol. Compared to rolled 1.5mm piping of other "popular" manifold brands this is going to be much stronger. I'd still make sure you have good mounts, hardware, and a flex section on the downpipe.

Beware it does not clear the valve cover "T" on the s13 sr unless you modify it.

http://www.e-3up.com/archives/1843

http://silkroad-jp.com/wpblog/2018/07/27/sr20manifold/

https://i1.wp.com/silkroad-jp.com/wpblog/wp-content/uploads/2017/08/SR.jpg?resize=768%2C455

Comparison to the traditional style.

https://i0.wp.com/silkroad-jp.com/wpblog/wp-content/uploads/2018/07/44.jpg?w=599

https://i2.wp.com/silkroad-jp.com/wpblog/wp-content/uploads/2018/07/oz.jpg?w=603

oIv_zsDO4T0Damn! That's really exciting. So this keeps it in the stock position? I have the s13 sr so I just have to relocate the "T" fitting. Because I looked at order and it says for s14 or s15 but doesn't list the s13. Damn price for it isn't bad either. At least before shipping. What dis you pay total for yours?

Sent from my SM-G973U1 using Tapatalk

[Jarom717]

Silk Road x 3UP Collab long runner stock location manifold. I got one a few weeks ago, hopefully it sounds rowdy.

Made with custom 3mm wall thickness, drawn stainless piping. Literally material that can't be bought they have it made specifically for this manifold lol. Compared to rolled 1.5mm piping of other "popular" manifold brands this is going to be much stronger. I'd still make sure you have good mounts, hardware, and a flex section on the downpipe.

Beware it does not clear the valve cover "T" on the s13 sr unless you modify it.

http://www.e-3up.com/archives/1843

http://silkroad-jp.com/wpblog/2018/07/27/sr20manifold/

https://i1.wp.com/silkroad-jp.com/wpblog/wp-content/uploads/2017/08/SR.jpg?resize=768%2C455

Comparison to the traditional style.

https://i0.wp.com/silkroad-jp.com/wpblog/wp-content/uploads/2018/07/44.jpg?w=599

https://i2.wp.com/silkroad-jp.com/wpblog/wp-content/uploads/2018/07/oz.jpg?w=603

oIv_zsDO4T0Hey bro did you order yours from the 3-up website? Could you send me the link where you got yours?

Sent from my SM-G973U1 using Tapatalk

[TheRealSy90]

Damn! That's really exciting. So this keeps it in the stock position? I have the s13 sr so I just have to relocate the "T" fitting. Because I looked at order and it says for s14 or s15 but doesn't list the s13. Damn price for it isn't bad either. At least before shipping. What dis you pay total for yours?

Sent from my SM-G973U1 using Tapatalk



Yes that is the reason they dont offer for s13 but it does work if you modify the T. If you click around on their blog there are a couple posts that show how they modified it. It is stock turbo location, bottom mount t2.

Prices may vary a bit depending on who you source it through, and your shipping method of choice. I dont like waiting so I paid for 2 day DHL shipping.

I paid under 50,000yen for the manifold itself before any shipping and broker commission. Quotes vary so Im not going to give my exact cost.



Sent from my iPhone using Tapatalk

[TheRealSy90]

Hey bro did you order yours from the 3-up website? Could you send me the link where you got yours?

Sent from my SM-G973U1 using Tapatalk



I always go through Streeter Corp for brokering parts from Japan.


Sent from my iPhone using Tapatalk

[Jarom717]

I always go through Streeter Corp for brokering parts from Japan.


Sent from my iPhone using TapatalkMahalo bro, just sent an email to them to try order this thing. Super stoked, looks like a great piece. Can't wait to get this thing.

Sent from my SM-G973U1 using Tapatalk