Massive SR Part-out (GT2871R/GT28R/intercooler/etc)

[knate]

Updated 2/4/2017:
-N62 MAF sold
-GT28R sold
-1 Timing chain tensioner sold
-1 pair of S13 cam oil squirters sold
-SR crank pulley sold
-SR front cover sold

I pulled the SR out of my car and am selling a bunch of stuff I have laying around.

GT2871R 3 inch inlet/0.64 A/R - Some nicks on the compressor wheel, was like that when I bought it. No issues, turbo worked great. Wastegate has a tack weld holding it closed because with JWT S3s I was getting boost creep, so I switched to external. Mostly ran at 16-18psi. Comes with stainless intake tube. $700 + shipping

http://i.imgur.com/hNDvkgr.jpg
http://i.imgur.com/L0jYpdd.jpg
http://i.imgur.com/v9TwjYf.jpg
http://i.imgur.com/OpUZyUH.jpg
http://i.imgur.com/mhV9nyB.jpg


Stock SR20DET manifold modified for Tial external wastegate. No worrying about cracks with this nice cast manifold professionally modified! Comes with heatshield and nuts predrilled for safety wire, the best way to keep your turbo from loosening! $150 + shipping

http://i.imgur.com/UPlxIWK.jpg
http://i.imgur.com/EW2P5On.jpg
http://i.imgur.com/QrUS2eB.jpg

T25 turbo outlet pipe $30
http://i.imgur.com/LjBKytx.jpg

Greddy outlet pipe, modified to perfectly fit GT28R internal baffle. $50 + shipping

http://i.imgur.com/NlRgISC.jpg


XS Engineering skyline intercooler with Swain heat emitting coating. Custom welded endtanks for the shortest piping possible with SR FMIC. Comes with 2.75" aluminum cold pipe and 2" stainless hot pipe. Intercooler is massive and just fits between frame rails, needs Silvia headlights or fixed 180 headlights to fit along with notching sheetmetal. Has flange for Greddy style BOV (BOV not included)Massive core with excellent cooling ability and very little lag! $700 + shipping

http://i.imgur.com/VuHduDg.jpg
http://i.imgur.com/pBDp9xS.jpg
http://i.imgur.com/iT8KZEq.jpg
http://i.imgur.com/i5vub4d.jpg
http://i.imgur.com/X93G7t5.jpg
http://i.imgur.com/jyj8FmD.jpg
http://i.imgur.com/D4A4v2r.jpg
http://i.imgur.com/ed6BZuh.jpg


Enthalpy tuned S13 SR20DET ECU. This is the list I had it tuned for:
-9.0:1 compression
-550cc Tomei injectors
-Z32 Maf
-GT2871R 0.64 A/R
-Walbro fuel pump
-JWT S3 cams
-stock manifolds
-92 octane

This should work with any mid-sized turbo and 550cc injectors with Z32 MAF. $300 + shipping

http://i.imgur.com/Pvvi0XI.jpg
http://i.imgur.com/uKz3FsG.jpg
http://i.imgur.com/prDp0nD.jpg
http://i.imgur.com/bn7pPLtg.jpg


Tial F38 Wastegate (I believe 16psi spring) Comes with safety wired bolts, heat wrap, and silicone hose. $150 + shipping

http://i.imgur.com/eRLmqBE.jpg
http://i.imgur.com/rCRpCvP.jpg


S13 SR20DET engine harness with Q45 ignitor - rewired and ready to plug into US 240SX. $200 + shipping

http://i.imgur.com/eK75A4l.jpg


Kougaku Racing Underdrive water pump pulley $50 + shipping

http://i.imgur.com/EnScYD5.jpg


Apexi Power Intake for Z32 MAF used $50 + shipping

http://i.imgur.com/VITysxj.jpg
http://i.imgur.com/KvPuch6.jpg


S13 SR water neck $50 + shipping

http://i.imgur.com/uHP0fEZ.jpg


S13 SR20DET cam squirters (small squirters, 1 set available) $50/pair + shipping

http://i.imgur.com/oFcjQSl.jpg


S14 SR20DET cam squirters (larger squirters, less likely to clog, 2 sets available) $75/pair + shipping

http://i.imgur.com/r3QxIv9.jpg


SR20DET chain tensioner (1 available) $20 + shipping

http://i.imgur.com/bzpjD4x.jpg

Used Apexi metal headgaskets SR20DET (2 available) - $50 each + shipping

http://i.imgur.com/kZ4D9BWg.jpg
http://i.imgur.com/llD4OFOg.jpg


S13 SR valve cover $50 + shipping

http://i.imgur.com/hfl2HIP.jpg
http://i.imgur.com/3b72hzQ.jpg


S13 SR20DET complete intake manifold - comes with factory 370cc injectors $200 + shipping

http://i.imgur.com/8GSX5n0.jpg
http://i.imgur.com/Z0PjgP2.jpg
http://i.imgur.com/kA2nm89.jpg

[Bnr32gtr]

Would u do 100 for the turbo manifold? 4436046344

[Luvs2slide]

how much for the throttle body?

[di-devol]

Ill take the manifold, wastegate and maf, in woodinville 98011

[knate]

how much for the throttle body?

I don't want to separate that. Isn't the throttle body basically the same as the KA24DE one except for no cruise pulley?

[knate]

Ill take the manifold, wastegate and maf, in woodinville 98011

Sounds good, PM sent!

[knate]

All PMs replied to, everything still available.

[knate]

Edited list with items that have sold.

[knate]

Bump, everything listed is still for sale.

[jedi03]

Pmd about a few things

[knate]

Updated list with items sold. Most things still available!

[knate]

Updated list, bump!

[RalliartRsX]

Pmed you earliest

[85efi]

Interested in the wg. There is any way to confirm the psi spring on it?

[coBBz]

price on injectors and fuel rail?