WA Massive SR Part-out (GT2871R/GT28R/intercooler/etc) - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

knate · 01-28-2017, 08:33 PM

Updated 2/4/2017:
-N62 MAF sold
-GT28R sold
-1 Timing chain tensioner sold
-1 pair of S13 cam oil squirters sold
-SR crank pulley sold
-SR front cover sold

I pulled the SR out of my car and am selling a bunch of stuff I have laying around.

GT2871R 3 inch inlet/0.64 A/R - Some nicks on the compressor wheel, was like that when I bought it. No issues, turbo worked great. Wastegate has a tack weld holding it closed because with JWT S3s I was getting boost creep, so I switched to external. Mostly ran at 16-18psi. Comes with stainless intake tube. $700 + shipping

Stock SR20DET manifold modified for Tial external wastegate. No worrying about cracks with this nice cast manifold professionally modified! Comes with heatshield and nuts predrilled for safety wire, the best way to keep your turbo from loosening! $150 + shipping

T25 turbo outlet pipe $30

Greddy outlet pipe, modified to perfectly fit GT28R internal baffle. $50 + shipping

XS Engineering skyline intercooler with Swain heat emitting coating. Custom welded endtanks for the shortest piping possible with SR FMIC. Comes with 2.75" aluminum cold pipe and 2" stainless hot pipe. Intercooler is massive and just fits between frame rails, needs Silvia headlights or fixed 180 headlights to fit along with notching sheetmetal. Has flange for Greddy style BOV (BOV not included)Massive core with excellent cooling ability and very little lag! $700 + shipping

Enthalpy tuned S13 SR20DET ECU. This is the list I had it tuned for:
-9.0:1 compression
-550cc Tomei injectors
-Z32 Maf
-GT2871R 0.64 A/R
-Walbro fuel pump
-JWT S3 cams
-stock manifolds
-92 octane

This should work with any mid-sized turbo and 550cc injectors with Z32 MAF. $300 + shipping

Tial F38 Wastegate (I believe 16psi spring) Comes with safety wired bolts, heat wrap, and silicone hose. $150 + shipping

S13 SR20DET engine harness with Q45 ignitor - rewired and ready to plug into US 240SX. $200 + shipping

Kougaku Racing Underdrive water pump pulley $50 + shipping

Apexi Power Intake for Z32 MAF used $50 + shipping

S13 SR water neck $50 + shipping

S13 SR20DET cam squirters (small squirters, 1 set available) $50/pair + shipping

S14 SR20DET cam squirters (larger squirters, less likely to clog, 2 sets available) $75/pair + shipping

SR20DET chain tensioner (1 available) $20 + shipping

Used Apexi metal headgaskets SR20DET (2 available) - $50 each + shipping

S13 SR valve cover $50 + shipping

S13 SR20DET complete intake manifold - comes with factory 370cc injectors $200 + shipping

Bnr32gtr · 01-28-2017, 08:45 PM

Would u do 100 for the turbo manifold? 4436046344

Luvs2slide · 01-29-2017, 07:35 PM

how much for the throttle body?

di-devol · 01-29-2017, 08:01 PM

Ill take the manifold, wastegate and maf, in woodinville 98011

knate · 01-29-2017, 10:18 PM

Quote:

Originally Posted by Luvs2slide

how much for the throttle body?

I don't want to separate that. Isn't the throttle body basically the same as the KA24DE one except for no cruise pulley?

knate · 01-29-2017, 10:18 PM

Quote:

Originally Posted by di-devol

Ill take the manifold, wastegate and maf, in woodinville 98011

Sounds good, PM sent!

knate · 01-30-2017, 05:30 PM

All PMs replied to, everything still available.

knate · 02-01-2017, 08:26 AM

Edited list with items that have sold.

knate · 02-03-2017, 05:14 PM

Bump, everything listed is still for sale.

jedi03 · 02-03-2017, 08:31 PM

Pmd about a few things

knate · 02-04-2017, 10:39 PM

Updated list with items sold. Most things still available!

knate · 02-26-2017, 08:31 PM

Updated list, bump!

RalliartRsX · 02-27-2017, 08:44 PM

Pmed you earliest

85efi · 02-27-2017, 10:49 PM

Interested in the wg. There is any way to confirm the psi spring on it?

coBBz · 02-28-2017, 02:03 PM

price on injectors and fuel rail?

01-28-2017, 08:33 PM	#1
knate Leaky Injector Join Date: Feb 2005 Location: Washington Posts: 117 Trader Rating: (0) Feedback Score: 0 reviews	Massive SR Part-out (GT2871R/intercooler/Enthalpy ecu/etc) Updated 2/4/2017: -N62 MAF sold -GT28R sold -1 Timing chain tensioner sold -1 pair of S13 cam oil squirters sold -SR crank pulley sold -SR front cover sold I pulled the SR out of my car and am selling a bunch of stuff I have laying around. GT2871R 3 inch inlet/0.64 A/R - Some nicks on the compressor wheel, was like that when I bought it. No issues, turbo worked great. Wastegate has a tack weld holding it closed because with JWT S3s I was getting boost creep, so I switched to external. Mostly ran at 16-18psi. Comes with stainless intake tube. $700 + shipping Stock SR20DET manifold modified for Tial external wastegate. No worrying about cracks with this nice cast manifold professionally modified! Comes with heatshield and nuts predrilled for safety wire, the best way to keep your turbo from loosening! $150 + shipping T25 turbo outlet pipe $30 Greddy outlet pipe, modified to perfectly fit GT28R internal baffle. $50 + shipping XS Engineering skyline intercooler with Swain heat emitting coating. Custom welded endtanks for the shortest piping possible with SR FMIC. Comes with 2.75" aluminum cold pipe and 2" stainless hot pipe. Intercooler is massive and just fits between frame rails, needs Silvia headlights or fixed 180 headlights to fit along with notching sheetmetal. Has flange for Greddy style BOV (BOV not included)Massive core with excellent cooling ability and very little lag! $700 + shipping Enthalpy tuned S13 SR20DET ECU. This is the list I had it tuned for: -9.0:1 compression -550cc Tomei injectors -Z32 Maf -GT2871R 0.64 A/R -Walbro fuel pump -JWT S3 cams -stock manifolds -92 octane This should work with any mid-sized turbo and 550cc injectors with Z32 MAF. $300 + shipping Tial F38 Wastegate (I believe 16psi spring) Comes with safety wired bolts, heat wrap, and silicone hose. $150 + shipping S13 SR20DET engine harness with Q45 ignitor - rewired and ready to plug into US 240SX. $200 + shipping Kougaku Racing Underdrive water pump pulley $50 + shipping Apexi Power Intake for Z32 MAF used $50 + shipping S13 SR water neck $50 + shipping S13 SR20DET cam squirters (small squirters, 1 set available) $50/pair + shipping S14 SR20DET cam squirters (larger squirters, less likely to clog, 2 sets available) $75/pair + shipping SR20DET chain tensioner (1 available) $20 + shipping Used Apexi metal headgaskets SR20DET (2 available) - $50 each + shipping S13 SR valve cover $50 + shipping S13 SR20DET complete intake manifold - comes with factory 370cc injectors $200 + shipping Last edited by knate; 02-26-2017 at 08:30 PM..

01-29-2017, 07:35 PM	#3
Luvs2slide Zilvia FREAK! Join Date: Oct 2006 Location: NW Florida Age: 39 Posts: 1,490 Trader Rating: (81) Feedback Score: 81 reviews	how much for the throttle body? __________________

01-29-2017, 08:01 PM	#4
di-devol Zilvia FREAK! Join Date: Jun 2010 Location: Woodinville Age: 39 Posts: 1,412 Trader Rating: (5) Feedback Score: 5 reviews	Ill take the manifold, wastegate and maf, in woodinville 98011 __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-28-2017, 08:45 PM	#2
Bnr32gtr Zilvia Addict Join Date: Feb 2013 Location: Mason-Dixon Age: 34 Posts: 600 Trader Rating: (8) Feedback Score: 8 reviews	Would u do 100 for the turbo manifold? 4436046344

01-30-2017, 05:30 PM	#7
knate Leaky Injector Join Date: Feb 2005 Location: Washington Posts: 117 Trader Rating: (0) Feedback Score: 0 reviews	All PMs replied to, everything still available.

02-01-2017, 08:26 AM	#8
knate Leaky Injector Join Date: Feb 2005 Location: Washington Posts: 117 Trader Rating: (0) Feedback Score: 0 reviews	Edited list with items that have sold.

02-03-2017, 05:14 PM	#9
knate Leaky Injector Join Date: Feb 2005 Location: Washington Posts: 117 Trader Rating: (0) Feedback Score: 0 reviews	Bump, everything listed is still for sale.

02-03-2017, 08:31 PM	#10
jedi03 Nissanaholic! Join Date: Jul 2008 Location: albuquerque Posts: 1,786 Trader Rating: (8) Feedback Score: 8 reviews	Pmd about a few things

02-04-2017, 10:39 PM	#11
knate Leaky Injector Join Date: Feb 2005 Location: Washington Posts: 117 Trader Rating: (0) Feedback Score: 0 reviews	Updated list with items sold. Most things still available!

02-26-2017, 08:31 PM	#12
knate Leaky Injector Join Date: Feb 2005 Location: Washington Posts: 117 Trader Rating: (0) Feedback Score: 0 reviews	Updated list, bump!

02-27-2017, 08:44 PM	#13
RalliartRsX Post Whore! Join Date: Apr 2006 Location: Maryland Posts: 4,753 Trader Rating: (32) Feedback Score: 32 reviews	Pmed you earliest

02-27-2017, 10:49 PM	#14
85efi Leaky Injector Join Date: Oct 2016 Location: Los Angeles Posts: 97 Trader Rating: (10) Feedback Score: 10 reviews	Interested in the wg. There is any way to confirm the psi spring on it?

02-28-2017, 02:03 PM	#15
coBBz Zilvia Member Join Date: Jun 2016 Location: California Age: 26 Posts: 166 Trader Rating: (3) Feedback Score: 3 reviews	price on injectors and fuel rail?