S14/S13, lots of parts

[phunc]

Willing to ship anything and can give quotes, buyer is responsible for shipping cost. Prices do not include shipping. Reply here or PM me with any questions. Can provide more pics of anything. Thanks for looking.

Z32 e-brake assembly $75
http://i.imgur.com/ou6LeWN.jpg
http://i.imgur.com/eLa8IIK.jpg

BNIB Viper Alarm system, bought a few years ago from Broadfield never used, $150
Viper 3202
522T Trunk release solenoid
520T Battery Backup System
507M Digital Tilt Motion Sensor
http://i.imgur.com/EAjlpp8.jpg

Marshall Gauges - also BNIB, opened to look at but never installed. these were $550 or so new. looking to get $350 for the set
Speedometer, Tachometer, Oil Pressure, Water Temp, Boost
http://i.imgur.com/odus8EG.jpg

Wiring harnesses from '95 240SX. all but the Main harness
http://i.imgur.com/eOQkPfj.jpg

S14 Silvia K's gauges $50
http://i.imgur.com/6FwIcu4.jpg
http://i.imgur.com/56QkXKq.jpg

S14 SR20DET Kouki (NA code) ECU. Says "JDM of Miami" on it, unsure of the tune (if any). Tested on my car and it started. $100
http://i.imgur.com/qgQWLDH.jpg?2
http://i.imgur.com/e60ZbwG.jpg?1

S14 SR20DET Kouki to S13 240SX chassis engine harness. Got this from a guy on here, not the cleanest job, I never tested its functionality myself. Broken connector in pic below. $50
http://i.imgur.com/l80gLYb.jpg?1
http://i.imgur.com/5z0C1ZP.jpg?1

S14 SR20DET Kouki engine harness. Stripped the insulation off and started labeling things, didn't finish, it's all there. $100
http://i.imgur.com/fOOczSQ.jpg?1
http://i.imgur.com/ha49Emd.jpg?1

S13 dash with those two cracks there. Good shape otherwise. $10
http://i.imgur.com/ZbmAM39.jpg?1

S14 dash. Has 3 small holes in the center where some gauges were. 2nd pic for hole size reference. $30
http://i.imgur.com/0Y6sdBA.jpg?1
http://i.imgur.com/yScZBEN.jpg?1

S13 gauge cluster surround. good shape, no cracks or anything. couple switches missing. $10
http://i.imgur.com/o8tjWk9.jpg?1

S14 OEM rear hubs/uprights/dust shield $50
http://i.imgur.com/BlmhNmt.jpg?2
http://i.imgur.com/BlmhNmt.jpg?2
http://i.imgur.com/N0Jye0V.jpg?2

S14 steering column, missing the blinker stalk. has key in the cylinder $50
http://i.imgur.com/VrCKPTk.jpg?1
http://i.imgur.com/YxGylqR.jpg?1
http://i.imgur.com/9U6ONXQ.jpg?1

S13 KA24DE, 180K on the clock, ran great when pulled, typical oil leaks. no PS pump or bracket, coolant temp sensor for gauge is not there, header is cut near the back. $200 picked up. can help load it up.
http://i.imgur.com/3OQaXyC.jpg?1
http://i.imgur.com/0D1amU6.jpg?1
http://i.imgur.com/Y3A6ptV.jpg?1

S13 cluster, not sure condition but it worked years ago. 112k on the odo. $40
http://i.imgur.com/OJy9jKt.jpg?1

S14 SR20DET OEM radiator. missing the drain plug on bottom. $50
http://i.imgur.com/syyLXFF.jpg?1

S14 KA24DE OEM header. $50
http://i.imgur.com/InGd0It.jpg?1

S14 Cusco RUCA, seem to be in good shape, nothing binding and moves smoothly. $200
I'll get better pictures once I get them off the car, just wanted to get them posted.
http://i.imgur.com/a94w0ym.jpg

S14 Cusco Tension rods, also good shape $175
http://i.imgur.com/WtD7CI4.jpg

S14 ISIS/ISR Traction and Toe Links $75 per set
http://i.imgur.com/DaUscas.jpg
http://i.imgur.com/a94w0ym.jpg

S14 HKS Coilovers - unsure of the model, all they say is HKS Damper. Came with a Silvia clip. $600
Never drove on these but the car sat on them for a minute. No leaks or anything like that, seem to be in good shape.
http://i.imgur.com/oDc558l.jpg
http://i.imgur.com/HkazNte.jpg
http://i.imgur.com/Jz199b0.jpg
http://i.imgur.com/jWDZkXX.jpg
http://i.imgur.com/rFvvKLm.jpg


S14 misc things, throw some offers
http://i.imgur.com/YOjn2YL.jpg?1
http://i.imgur.com/PwLxlRo.jpg?1
http://i.imgur.com/pe2vtIl.jpg?1
http://i.imgur.com/zrowOUS.jpg?1
http://i.imgur.com/6alirMS.jpg?1
http://i.imgur.com/ULUM0Zw.jpg?1
http://i.imgur.com/5pRCfCE.jpg?1
http://i.imgur.com/OphTXA7.jpg?1
http://i.imgur.com/gvcRkCY.jpg?1
http://i.imgur.com/EDaXxoG.jpg?1



Thanks

[dreimers]

do you have the splash shield that goes under the engine for a S14?

[phunc]

do you have the splash shield that goes under the engine for a S14?

I dont. Sorry

[SoundEfx]

Can I get a price quote for the door panels shipped to 98052?

[phunc]

kcross - no fenders. sorry

SoundEfx, sent you a PM. I just tried to ship the door panels to OR and they told me $125...

[phunc]

Bump, just added some new stuff. Thanks

[phunc]

Just dropped all prices, everything is OBO.
Thanks

[Po_31]

Still have the rear calipers and ebrake assembly?

[phunc]

Yep if it's listed I still have it!

[phunc]

Bump, prices reduced again and deleted a couple sold items

[s14_monster]

Do you have any corner lights or grill?

[phunc]

Just what's listed for now. Thanks

[phunc]

Bump, added more stuff and reduced prices again.
Thanks

[jscherf92]

Interested in the rear hubs if the bearings are alright, but i'd need them shipped to 30101 and I'm not really interested in the dust shield or uprights. Any chance you'd be willing to separate? PM me if you want to work something out. Thanks

[cdeweerd]

How much do you want for the defrost vent cover shipped to 51106 and are all the clips intact?

[phunc]

Sent pms to you guys

[phunc]

bump -----------

[Mintvert]

Does that engine have the dust shield on the back? THE one between the block and bellhousing?

[phunc]

Sorry nope it doesn't.

[shaggy sr]

damn s13 RPM is fucked up!

[phunc]

LOL damn I didn't even notice. Perma drift mode? I think it isn't broken tho should just spin back

[VenomKillz]

How much for the ash tray? Might think about the cluster if the RPMs is fixable..

[Onecrazy240sx]

How much for the s13 dash shipped to 95020?

[dallaschristman]

I'm interested in that Viper system. Is that $150 for everything?

[phunc]

PMs sent, thanks