View Full Version : rb20 s13 no headlights or brake lights [help]
steveff
04-24-2016, 02:25 PM
So I completed the swap in my s13 and went to drive it yesterday and the headlights and brake lights do not work.
What does work:
FRONT blinkers / flashers / fog lights
REAR running lights / blinkers / flashers / reverse lights.
NO headlights, high beams, or brake lights.
Switches are good because the relays click on. But the fuses aren't getting power. Hooked up a multimeter to the fuses and got nothing.
Every fuse/relay in the entire car is good. Checked em all.
So I'm thinking I missed a connector / ground or some sort of BS I'm overlooking. Cant find any plugs or connectors that mean anything to this issue that are unhooked. Don't see any loose or missing grounds. Went over everything with a fine tooth comb. Just seems weird because they're two separate things as far as I know, so what could I be missing that effects both of them??
Any ideas guys?
hobbs
04-24-2016, 02:33 PM
Grab the FSM and start to trace back through the circuits and find out where you are and were you arnt getting power. Every single harness is blow apart in the FSM along with connectors.
My guess would be the column switch.
steveff
04-24-2016, 02:34 PM
R32 gtst FSM or an s13 FSM.
Sent from my SM-G925T using Tapatalk
hobbs
04-24-2016, 02:37 PM
S13 FSM, only thing that interfaces with your RB20 would be the lower transmission harness for the reverse lights.
Tyler_240
04-24-2016, 03:30 PM
Are you sure you remembered to plug in your dash harness? the white plug on the passenger side above the ECU way up in the dash?
/my 2cents
steveff
04-24-2016, 03:30 PM
Yeah. Dash lights and interior lights all work.
Sent from my SM-G925T using Tapatalk
cotbu
04-24-2016, 05:12 PM
The red plug on the battery is power for the headlights. So if you relocated the battery or just forgot those plugs. That might be your issue. Post a picture in a minute.
http://i50.photobucket.com/albums/f345/KeithDigital/240/DSC03744s.jpg
steveff
04-24-2016, 05:13 PM
I did relocate the battery.... I don't remember seeing any red plug
Sent from my SM-G925T using Tapatalk
cotbu
04-24-2016, 05:17 PM
Did you get that picture?
steveff
04-24-2016, 05:18 PM
Yeah I got it.... I have no idea where that plug went.
Sent from my SM-G925T using Tapatalk
cotbu
04-24-2016, 05:19 PM
Do you have the wires that plug into it, if you do add 12v to it and you lights should work.
If you're not sure, if they are the correct wires, remove the headlight fuses and check continuity from the wires to the fuse.
steveff
04-24-2016, 07:16 PM
http://uploads.tapatalk-cdn.com/20160425/081242127ca17dd961e10b71494abbe8.jpg
So black is alternator and green are headlights. Headlights are figured out now, just need that red plug or a terminal block.
What about brake lights now?
Sent from my SM-G925T using Tapatalk
steveff
04-25-2016, 07:31 AM
Up
Sent from my SM-G925T using Tapatalk
steveff
04-29-2016, 10:20 AM
Got it figured out. Headlights were that little red plug that I just hardwired. And the brake lights were a loose power wire going into the interior fuse box.
Weird how both happened at the same time though. Thought for sure it would be related.
Thanks again to whoever suggested that little plug, totally slipped my mind.
Sent from my SM-G925T using Tapatalk
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.