Energy suspension subframe bushing problem s13

[AnonymousBlackX]

So with the energy suspension rear subframe bushing you aren't supposed to remove the inner sleeve in the subframe... Well I did now the subframe is just sliding down the bushing and resting on the nut/oem washer and tips tricks to fix this I found this thread http://zilvia.net/f/showthread.php?t=382213 but I cannot wrap my head around post#12/13. No rush as i have a broken finger and still have to press out all of the other bushings any ideas?:picardfp::picardfp::picardfp:

[DennisC]

Either get another subframe or order some solid bushings..

[AnonymousBlackX]

Okay so this is how I fixed the bushing sliding up on install. I bought 16 giant washers and used 8 of them basically the subframe uses an upside down cone washer to tighten it down. So I put the washers in between the cone and the bush. Tightened it right up to the frame at that point.


http://i1371.photobucket.com/albums/ag299/Chris_Cavaness/1E19BF99-A894-497D-8D72-767FE82A5252_zpsl0ka44ci.jpg (http://s1371.photobucket.com/user/Chris_Cavaness/media/1E19BF99-A894-497D-8D72-767FE82A5252_zpsl0ka44ci.jpg.html)
http://i1371.photobucket.com/albums/ag299/Chris_Cavaness/98CFD958-5B9B-46AE-A00A-5C5FE31426EE_zpsq41ohxtl.jpg (http://s1371.photobucket.com/user/Chris_Cavaness/media/98CFD958-5B9B-46AE-A00A-5C5FE31426EE_zpsq41ohxtl.jpg.html)