Energy suspension subframe bushing problem s13 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

AnonymousBlackX · 02-22-2016, 07:23 PM

So with the energy suspension rear subframe bushing you aren't supposed to remove the inner sleeve in the subframe... Well I did now the subframe is just sliding down the bushing and resting on the nut/oem washer and tips tricks to fix this I found this thread #/f/showthread.php?t=382213 but I cannot wrap my head around post#12/13. No rush as i have a broken finger and still have to press out all of the other bushings any ideas?

DennisC · 02-22-2016, 08:55 PM

Either get another subframe or order some solid bushings..

AnonymousBlackX · 02-25-2016, 01:20 PM

Okay so this is how I fixed the bushing sliding up on install. I bought 16 giant washers and used 8 of them basically the subframe uses an upside down cone washer to tighten it down. So I put the washers in between the cone and the bush. Tightened it right up to the frame at that point.

02-22-2016, 08:55 PM	#2
DennisC Zilvia Junkie Join Date: Dec 2010 Location: Elk Grove Posts: 581 Trader Rating: (9) Feedback Score: 9 reviews	Either get another subframe or order some solid bushings.. __________________

02-25-2016, 01:20 PM	#3
AnonymousBlackX Leaky Injector Join Date: Aug 2015 Location: New Mexico ABQ Posts: 143 Trader Rating: (1) Feedback Score: 1 reviews	Okay so this is how I fixed the bushing sliding up on install. I bought 16 giant washers and used 8 of them basically the subframe uses an upside down cone washer to tighten it down. So I put the washers in between the cone and the bush. Tightened it right up to the frame at that point. __________________ My 240 youtube.com/AnonymousBlackX

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-22-2016, 07:23 PM	#1
AnonymousBlackX Leaky Injector Join Date: Aug 2015 Location: New Mexico ABQ Posts: 143 Trader Rating: (1) Feedback Score: 1 reviews	Energy suspension subframe bushing problem s13 So with the energy suspension rear subframe bushing you aren't supposed to remove the inner sleeve in the subframe... Well I did now the subframe is just sliding down the bushing and resting on the nut/oem washer and tips tricks to fix this I found this thread #/f/showthread.php?t=382213 but I cannot wrap my head around post#12/13. No rush as i have a broken finger and still have to press out all of the other bushings any ideas? __________________ My 240 youtube.com/AnonymousBlackX