View Full Version : CA S13 Drift Car SR20DET Partout (PBM, Tomei, Apexi, B&M)
Hey everyone! Made a different thread for my part out, going a different route with my build i'm selling off all parts on this car that are SR20 related.
Parts location: Palmdale, CA 93551
Huge parts list, Please comment in what you're interested in below! Any specific SR20 parts that are on the motor that you're interested in that aren't listed PM me and I can give you a price for it.
PM me for Shipping costs if you want anything below!
Parts list as of December 20, 2016
Engine
-Takata Race 4 ASM Green Harnesses - $280/Each
http://www.import-addicts.com/wp-content/uploads/2016/09/2016-09-06-22.44.19.jpg
http://www.import-addicts.com/wp-content/uploads/2016/09/2016-09-06-22.44.58.jpg
-CP Pistons & Eagle Rods (Came out of my blown SR, I'm not sure if they're even good; Sold as is) $200obo
http://www.import-addicts.com/wp-content/uploads/2016/10/DSC1681.jpg
http://www.import-addicts.com/wp-content/uploads/2016/10/DSC1683.jpg
http://www.import-addicts.com/wp-content/uploads/2016/10/DSC1684.jpg
http://www.import-addicts.com/wp-content/uploads/2016/10/DSC1692.jpg
http://www.import-addicts.com/wp-content/uploads/2016/10/DSC1694.jpg
-A'PEXi Power Intake for Z32 MAF(Almost new condition) - $55
http://www.import-addicts.com/home/wp-content/uploads/2015/10/2015-10-22-22.23.56-e1445581740629.jpg
-Nissan S13 SR20DET Coil Packs (4) - $50
http://www.import-addicts.com/home/wp-content/uploads/2016/03/2016-03-13-19.25.30-e1457922621197.jpg
-GSWerks Custom Baffled Oil Catch can - $40
http://www.import-addicts.com/home/wp-content/uploads/2015/10/2015-10-22-22.23.24-e1445581708513.jpg
-Circuit Sports Oil Cooler Adapter with Oil cooler lines, all you need is a new oil cooler core - $50
http://www.import-addicts.com/home/wp-content/uploads/2016/03/2016-03-07-19.38.58-e1457517866330.jpg
No photos as of Dec.20(Will upload some soon)
-Nissan S13 SR20DET 5-Speed transmission, 2nd grinds $50 Picked up
-VIS Carbon Fiber Trunk(Needs Work) - $100 Picked up
-Greddy Oil Filter SR20- $6
Parts Sold as of December.20.2016
-Tanabe Revel ELS Gauge (Boost)(SOLD)
-AEM Wideband Air/Fuel Ratio Gauge(SOLD)
-Tanabe Revel ELS Gauge (Oil Pressure)(SOLD)
-9K Racing 150mm Shift knob(SOLD)
-Koyo Racing Radiator Cap(SOLD)
-Koyorad Radiator w/Electric Fans & Shroud(SOLD)
-Samco Silicon Radiator Hoses w/ Greddy Thermostat Sensor(SOLD)
-Z32 MAF(SOLD)
-S13 SR20DET Power Steering pump(SOLD)
-Nismo Adjustable Fuel Pressure Regulator-Type B(SOLD)
-S15 SpecR Dual Ball bearing T28 Turbo without other stuff(No shaft play)(SOLD)
-555cc Tomei Fuel Injectors(SOLD)
-Apexi Power FC L-jetro(MAF) for Nissan 240sx SR20DET w/FC Commander(REDTOP, Model #414-N014)(SOLD)
-Greddy SR20DET Oil pan(SOLD)
-B&M Short Shifter(SOLD)
-S13 Radio Bezel(SOLD)
-Circuit Sports Engine mounts(SOLD)
-Parts by Max HMIC Complete Kit(T28 Turbo, OEM S13 SR or Greddy Intake manifold)(SOLD)
-Nissan Z32 BM-57 Master Brake Cylinder(SOLD)
-Parts by Max Super Angle Knuckle(SOLD)
-Parts by Max Front Lower Control Arm + Tension Rod Combo (BENT)(SOLD)
-Parts by Max Traction Rod(SOLD)
-Gramlights 57DR 17x9 +22 Square(SOLD)
-SPL Pro V5 Outer Tie Rod Ends(SOLD)
-TEIN Hardened Inner Tie Rods(SOLD)
-Parts by Max Pro Toe Rod(SOLD)
-Parts by Max Rear Upper Control Arms(SOLD)
-Uncracked S13 Dash(SOLD)
-Siliva S13 Brick's Headlights(SOLD)
-Parts by Max Flex Cobra Downpipe(For T28 Turbos) wrapped in Mishimoto heat wrap(SOLD)
-Circuit Sports Brake Master Cylinder Heat Shield S13 with Mishimoto Thermal Tape(SOLD)
-Parts by Max Turbo Inlet pipe for T28 style turbo for Z32 MAF(SOLD)
-Mishimoto X-Line Aluminum Radiator(MMRAD-S13-89SRX), 1989-1994(SOLD)
-Bride Seat Rails Pair(Passenger & Driver)(SOLD)
-Parts by Max MaxPro Coil-Overs(less then 30 miles)(SOLD)
-Parts by Max Rear Drop Knuckles(less then 30 miles)(SOLD)
-S13 Chase Bays Fender well Brake Lines for Z32 Calipers(SOLD)
-Hydro Dual Caliper Full Bolt On Set-up: (ASD 16’’ Pull back Universal Hydraulic E-Brake 3/4 , Custom Lines Included)(SOLD)
-89-99 Kaaz 2-Way Diff 240sx (Great Condition, Low miles) with Final Drive & 5 Bolt output shafts(SOLD)
-Nissan SR20DET T28 Compressor inlet(SOLD)
-Nissan SR20DET T28 Compressor Outlet(SOLD)
-Nissan Z32 Aluminum 30mm Front Caliper Pair(SOLD)
-Nissan Z32 Aluminum Rear Caliper Pair(Comes with hardware and stock pads)(SOLD)
-Parts By Max S13 Skid Plate (Gold)(SOLD)
-Nissan SR20 Notchtop Valve cover Black(SOLD)
-Nissan S13 Door covers(SOLD)
-ATP Manual Boost controller(SOLD)
-Nissan SR20DET T25 Compressor inlet(SOLD)
-Mishimoto S13 Aluminum Fan Shroud (#MMFS-S13-89SR)(SOLD)
-NRG Steering Hub lock(SOLD)
-Frozen boost 31”x11.75”x3” Bar and Plate 600HP Capable intercooler with new Silicon couplers(SOLD)
-Nissan Z32 Aluminum Rear Caliper Pair(Comes with hardware no pads(SOLD)
-Porterfield R4 AP460 Front brake pads for z32(SOLD)
-Porterfield R4 AP461 Rear brake pads for z32(SOLD)
-Parts by Max RLCA(less then 30 miles)(SOLD)
Enjoy!
240knockout
11-22-2015, 07:01 PM
how much for the shipping on the skid plate to 33304?
S14kouki805
11-23-2015, 04:00 PM
Bookmarking this
s14Irvin
11-23-2015, 04:31 PM
I'll take the samco hoses! What's your PayPal
lewisfk
11-23-2015, 06:24 PM
Apexi Power intake and z32 maf 170 shipped plus fees. If thats good with you pm and i will give you my pay pal info.
Bump, Parts sold recently
-Greddy SR20 Oil pan
-Z32 MAF
-Samco Radiator hoses.
Pm me if your interested in any item on the list above or message me if you want a part from the motor.
Bump, Parts sold yesterday
-S13 SR20DET Power Steering pump
-Nismo Adjustable Fuel Pressure Regulator-Type B
Pm me if you want any and all parts SR related, thanks guys
Zenkiii
11-25-2015, 08:33 PM
What's a deal you can make for the l jetro and 555cc injectors and the turbo itself
soCALsx
11-26-2015, 10:22 PM
You selling the hydro?
Po_31
11-26-2015, 11:16 PM
Do you still have the short shifter
You selling the hydro?
Sorry Im not, Im keeping it for what I have in store for the build.
Bump, Parts sold yesterday
-S15 SpecR Dual Ball bearing T28 Turbo without other stuff(No shaft play)
-555cc Tomei Fuel Injectors
Pm me if you want any and all parts SR related, thanks guys!
soCALsx
11-28-2015, 09:14 AM
I pmd you with my number about the gauges
Bump, Parts sold today!
-Tanabe Revel ELS Gauge (Oil Pressure)
-APEXI Power FC L-Jetro
PM me for any parts requests above.
interested in the pbm skid plate... pm'd you but no reply
soCALsx
11-29-2015, 09:45 AM
Ah man I wanted both the gauges
Bump, Parts Sold today!
-9k Racing 150mm Shift Knob
Please message me if you want any parts still for sale, PMs get priority
Bump added photos of the B&M Shifter.
Also I cannot ship out the PBM Skid Plate & Cobra Flex Downpipe, since I don't have boxes big enough to fit them in. Sorry for the inconvenience! Those Items are reserved for Pick up in Southern California only at the moment.
Lpn26
12-02-2015, 01:16 AM
How much for the short shifter picked up
Bump, all parts listed above are still available unless otherwise stated as sold.
Parts only available for pick up in Southern California:
-PBM Skid Plate(Gold) $80 Picked up
-PBM Cobra Flex Downpipe $260 Picked up
Available in Northridge, CA or Palmdale, CA.
TheRealSy90
12-06-2015, 11:37 PM
I need the rubber injector insulators and metal washers that are underneath the injector caps.
Decided to sell the PBM HMIC complete set
$330 shipped
Less then 10 miles on it, perfect running order
Its specifically spec'd for S13 SR20DET's With T28 Turbo and Stock intake manifold(I have an optional pipe for those running the Greddy/Freddy Intake manifolds).
Comes with:
-PBM HMIC Core
-PBM Cold Pipe for OEM S13 SR20DET & KA intake Manifolds(Wrapped with Mishimoto Gold heat tape)(I have Greddy Style Cold pipe too)
-PBM Hot Pipe for T28 Turbo(Wrapped with Mishimoto Gold heat tape)
Awesome setup but I rather part with the whole system, since I wont be using the pipes for my new build.
Picture of it is the first on the thread, More coming soon.
DopeSpike
12-09-2015, 12:29 PM
Not willing to ship the PBM Cobra Downpipe?
I saw you put pick up only.
Not willing to ship the PBM Cobra Downpipe?
I saw you put pick up only.
Currently don't have a box big enough to ship it in, because of its a weird shape.
Decided to just part out the whole car, All parts up for grabs! PM Quick! Photos of the parts will be available later this week! Still have Finals till thursday.
Avyar
12-15-2015, 01:57 PM
Selling radio/shifter bezel?
Parts sold yesterday:
-B&M Short Shifter
-S13 Radio Bezel
Will upload more photos of the parts, when I have time to take them off later this week.
Random bump for the parts
sleeper108
12-18-2015, 11:10 AM
Can you cut a package deal for the rear PBM suspension links and the inner and outer tie rods shipped to 87107 (business address)
What gen are the super angle knuckles?
BUMP Random PBM HMIC SOLD
BM-57 Master Cylinder SOLD
Circuit Sports Engine mounts SOLD
Bump! Parts sold as of December.21st
-Circuit Sports Engine mounts
-Parts by Max HMIC Complete Kit(T28 Turbo, OEM S13 SR or Greddy Intake manifold)
-Nissan Z32 BM-57 Master Brake Cylinder
PM me if you're interested in photos of other parts! Or ready to pay for a part.
Bump, parts still available. PM me for details
XgoldzenkiX
12-24-2015, 06:52 PM
How much for the knuckles shipped 95993?
KyleT
12-24-2015, 09:04 PM
I maybe have missed it but are the gram lights for sale?
Sent from my iPhone using Tapatalk
theskidmasta
12-25-2015, 12:51 PM
Is the kaaz diff still available? If so shoot me a PM
Sent from my iPhone using Tapatalk
Jnev7
12-25-2015, 08:52 PM
Interested in the kaaz diff. Also saw a pic of Greddy oil pan if it's for sale interested
Sent from my iPhone using Tapatalk
Bump, updated photos of the parts recently taken off, price list updated and sold list.
are you selling the asd hydro
Bump for 2016, lets get this stuff sold!
All PMs Replied too.
Added photos of these two new items for sale!
-Mishimoto Aluminum Fan Shroud Kit for SR20, 1989-1994 240SX NEW!! $170 Shipped
http://www.import-addicts.com/home/wp-content/uploads/2016/01/2015-12-22-22.46.13-e1451896378225.jpg
http://www.import-addicts.com/home/wp-content/uploads/2016/01/2015-12-22-22.46.02-e1451896411240.jpg
silverarrow27
01-04-2016, 06:37 PM
What color is the uncracked dash?
Bump will update thread soon with photos of these parts:
-PBM Max Pro Coil overs
-PBM Rear Suspension Links
-Kaaz Diff
-more parts
All PMs Replied too!
Photos of the wheels for condition
-Gramlights 57DR 17x9 +22 Square(SOLD as of Jan.8th
Jorgs_7
01-06-2016, 08:51 AM
Is that heatshield meant for inbetween exhaust/brake lines in the engine bay?
PM'd
MiamiZ33
01-07-2016, 12:39 PM
Are the front knuckles and FLCA's going to be available soon? Please PM me asap.
Thanks,
Mike
Bump for Jan.8th
Parts Sold recently:
-Parts by Max Super Angle Knuckle(SOLD)
-Parts by Max Front Lower Control Arm + Tension Rod Combo (BENT)(SOLD)
-Parts by Max Traction Rod(SOLD)
-Gramlights 57DR 17x9 +22 Square(SOLD)
-SPL Pro V5 Outer Tie Rod Ends(SOLD)
-TEIN Hardened Inner Tie Rods(SOLD)
-Parts by Max Pro Toe Rod(SOLD)
-Parts by Max Rear Upper Control Arms(SOLD)
-Uncracked S13 Dash(SOLD)
Also Im having a flash sale for the:
-Parts by Max Flex Cobra Downpipe(For T28 Turbos) wrapped in Mishimoto heat wrap
If you can pick it up in Southern California, Im willing to knock off $70 OFF my asking price
$200 Picked up! This deal wont last long!!!!!!!
Picked up in Palmdale, CA
Savings of $120 off Parts Shop Max pricing, not including Tax, Shipping & Mishimoto Heat wrap!
KJR50
01-08-2016, 09:28 PM
I/P cluster available? $?
firekirin
01-08-2016, 10:17 PM
Sent you a pm
Morning bump, parts list updated! Hit me up!
Bump for the morning!
Parts available on updated list as of Jan.16th
Also Car Shell will be for sale soon, Send me offers!
It will come with:
Car specs:
1989 Nissan 240SX XE
Clean Title in Hand
Mileage: 123k Miles
Reg till April 2016, Was going to register it Non-OP after the smog expires. Perfect drift or track car project.
Parts to be included(Will be Updated):
-Parts by Max MaxPro Coil-Overs or a different one based on price of shell
-Parts by Max Solid Sub frame Risers
-Energy Suspension Steering rack Bushings
-Circuit Sports Aluminum Steering Linkage Spacer
-Circuit Sports Rear Sway Bar End links
-Circuit Sports Front Sway Bar End Links
-All Stock suspension
-Ichiba 5 Lug conversion front and Rear
-DMax Rear Taillights
-No Wheels (Bring your own)
-No Seats
-No brakes
-Welded Diff or Kaaz 2-Way depending on offers for car
-Custom GSWERKS Full 6-point Roll cage w/ Door Bars and Gussets Top Drift Spec
-VIS Carbon Fiber hood with AeroCatch Latches
-VIS Carbon Fiber Trunk(Not Installed at the moment, But will come with car. It needs a new clear coat and repair)
-NRG Hub w/ Quick release and Lock
-Nissan S13 Silvia K’s Front End Conversion with Projector Headlights(One has a broken tab, Needs to be repaired)
-Welded in bracket for hydro E-brake, No stock E-brake mount anymore)
Its going to be pretty bare shell, basically a perfect for someone who doesn't want to go through the hassle of having to strip, prep and have a roll cage installed on a 240sx. Or someone who has a motor to drop in and wire up, I would suggest that the new owner has over fenders installed in the rear since the fenders were cut up since I ran PBM Rear Drop knuckles on my old set up.
Here's a few photo of the car, showing the condition of the exterior and interior. I can upload more to interested buyers. I also included progress photos of the build from when I started it a few years ago.
http://www.import-addicts.com/home/wp-content/uploads/2016/01/2016-01-16-06.16.16-e1452954016694.jpg
http://www.import-addicts.com/home/wp-content/uploads/2016/01/2016-01-16-06.16.47.jpg
http://www.import-addicts.com/home/wp-content/uploads/2016/01/2016-01-16-06.16.38.jpg
http://www.import-addicts.com/home/wp-content/uploads/2016/01/2016-01-16-06.16.54.jpg
http://www.import-addicts.com/home/wp-content/uploads/2016/01/2016-01-16-06.17.08.jpg
http://www.import-addicts.com/home/wp-content/uploads/2016/01/2016-01-16-06.16.27-e1452954140432.jpg
http://www.import-addicts.com/home/wp-content/uploads/2016/01/2016-01-16-06.17.16.jpg
http://www.import-addicts.com/home/wp-content/uploads/2016/01/2014-08-21-16.27.58-e1452954203443.jpg
http://www.import-addicts.com/home/wp-content/uploads/2016/01/2016-01-16-06.17.40.jpg
http://www.import-addicts.com/home/wp-content/uploads/2016/01/2016-01-16-06.17.32.jpg
harrypotter
01-19-2016, 10:54 AM
PM sent about Parts by Max Turbo Inlet pipe for T28 style turbo for Z32 MAF - $50 Shipped
Bump for Jan.19th, a few parts sold recently:
-Parts by Max Flex Cobra Downpipe(For T28 Turbos) wrapped in Mishimoto heat wrap(SOLD)
-Circuit Sports Brake Master Cylinder Heat Shield S13 with Mishimoto Thermal Tape(SOLD)
-Parts by Max Turbo Inlet pipe for T28 style turbo for Z32 MAF(SOLD)
Bump for Jan.21
Parts sold recently:
-Mishimoto X-Line Aluminum Radiator(MMRAD-S13-89SRX), 1989-1994(SOLD)
bushybeardedtaco
01-21-2016, 02:03 PM
Hey man does the skip plate come with hardware? Also when are you in Northridge if I wanted to pick it up
Sent from my iPhone using Tapatalk
Hey man does the skip plate come with hardware? Also when are you in Northridge if I wanted to pick it up
Sent from my iPhone using Tapatalk
I actually wasn't given hardware when I received it from PBM, Its suppose to come with it. But I didn't realize it till later, Im willing to drop the price by $15 so you can buy the hardware directly from them. Let me know if you want to make a deal.
SOLD the two motorsets
transmission from one still available
Jarom717
02-08-2016, 12:47 AM
Willing to ship
Sent from my SAMSUNG-SM-G920A using Tapatalk
Willing to ship
Sent from my SAMSUNG-SM-G920A using Tapatalk
Willing to ship what exactly? The motor?
Jarom717
02-09-2016, 11:21 PM
Willing to ship what exactly? The motor?
Sorry for being vague I meant the block but nevermind I was able to pick one up from a freind yesterday
Sent from my SAMSUNG-SM-G920A using Tapatalk
Bump for March. 1st, Pm me if you want anything for sale.
Parts located in:
Palmdale, CA 93551
Cash is king.
Bnr32gtr
03-02-2016, 08:10 PM
Do u still have the s14 sr valve cover 4436046344 thanks
slideways408
03-03-2016, 01:03 PM
Pm for the coilovers sir
Bump all PMs replied too,
Parts sold recently as of Mar 7th
-Parts by Max MaxPro Coil-Overs(less then 30 miles)
Bump added more photos:
http://www.import-addicts.com/home/wp-content/uploads/2016/03/2016-03-06-19.24.58-e1457517798320.jpg
http://www.import-addicts.com/home/wp-content/uploads/2016/03/2016-03-07-19.38.25-e1457517823852.jpg
http://www.import-addicts.com/home/wp-content/uploads/2016/03/2016-03-07-19.38.58-e1457517866330.jpg
http://www.import-addicts.com/home/wp-content/uploads/2016/03/2016-03-07-19.39.07-e1457517902443.jpg
http://www.import-addicts.com/home/wp-content/uploads/2016/03/2016-03-07-19.39.45-e1457517937202.jpg
http://www.import-addicts.com/home/wp-content/uploads/2016/03/2016-03-07-19.40.13-e1457517966753.jpg
http://www.import-addicts.com/home/wp-content/uploads/2016/03/2016-03-07-19.40.31-e1457517998698.jpg
Yo, willing to sell me the head complete?
Bump parts list updated! as of Mar.13th
I updated the thread with photos of the:
Kaaz 2 Way Diff, It will not come with final drive
SOLD SOLD SOLD
c0ryhaze
03-14-2016, 12:24 AM
nevermmind, was thinking wrong thing
Bump for thursday, parts still available
Bump for the weekend! Parts list is almost fully sold.
Bump for monday,
Parts sold yesterday:
-Nissan SR20DET T28 Compressor inlet(SOLD)
-Nissan SR20DET T28 Compressor Outlet(SOLD)
PM me if you're interested in the other stuff still available, PM Discounts of the left overs of the partout.
BUMP prices lowered lets get this left over stuff sold!
yurisfriendevan
04-27-2016, 12:43 PM
Hey, we're trying to come see the motor for sale. Hit me up I'm local. 661 350 6515
Climb385
04-28-2016, 09:13 PM
sr starter?
Bump! for Jun.1st I organized the photos better to help people interested!
Also I'm parting out a SR20 Long block all parts for sale
-Damaged S13 SR20 Head (I camshaft journal is scored and it needs repair) comes with BC Springs, BC Retainers and stock Valves $100 picked up
-Stock S13 SR20 Camshafts $15 each
-Stock S13 Headstuds if you want them $15
-SR20 Bare bottom end No pistons or crank $120
-Cp Pistons good condition (NO PRICE YET)
-S13 SR20 Valve cover $70
More items to come
sr starter?
Didn't list it for sale but I can do $55 Shipped to you
It worked 100% last time I fired up the car last year before the part out.
vinnyjdm
06-02-2016, 11:12 AM
does the hub lock come with a hub also or just the lock
does the hub lock come with a hub also or just the lock
The NRG hub lock doesn't come with the hub. It only comes with the Hub lock and Key
bump for these parts, message me or comment if you're interested in any part
Dayummoises
06-08-2016, 01:59 AM
Sr20 starter
Sent from my LG-H631 using Tapatalk
Bump lowered the prices on all items listed for sale!!
240riot
06-19-2016, 03:42 AM
Still have the nrg lock?
Sent from my SM-G935V using Tapatalk
xhjhj
06-19-2016, 07:34 AM
how much for the shipping on the skid plate to 33314?
Bump lowered every price on every part in this thread, lets get this stuff sold!
vinnyjdm
07-22-2016, 12:44 AM
sent you a pM
Po_31
07-22-2016, 12:47 AM
I'll take hub lock
misfitsfreak81
08-10-2016, 04:19 PM
got the trans still? manual? pm me please and let me know. trying to get my s14 back on the road. thanks
Bump for this week, message me with offers if you're interested in anything listed
chrdavis17
08-17-2016, 09:00 AM
Steering Hub Lock shipped to 11554?
lm7240
08-19-2016, 07:10 PM
Pmed about Pbm
Bump added photos of the takata race 4 harnesses that I recently decided to sell, $330 each or $620 for the pair +Shipping
Send me PM's
I'm motivated to sell this stuff.
Bump for the weekend! Send me any offers
now and later
09-16-2016, 06:36 PM
Still have the brake roters ?? Plz give me a call or txt if you fo 8054229021 Thanks
Joey
now and later
09-16-2016, 06:39 PM
Still have the brake calipers ?? Plz give me a call or txt if you fo 8054229021 Thanks
Joey
All PMs replied, send any offers
Bump send any and all offers
Bump all prices lowered, if you're interested in anything please PM me
Sprayrei
10-05-2016, 10:25 AM
Do you still have the rear brake calipers?
Do you still have the rear brake calipers?
Yes sir $100 shipped.
All PMs Replied, Bump for the top.
240silviasx
10-19-2016, 12:10 AM
gs werks catch can baffled?
McRib47
10-19-2016, 08:17 AM
do you still have z32 rears? and where are you located?
jerry v
10-22-2016, 04:03 PM
Are the brake pads new??
Sent from my iPhone using Tapatalk
Are the brake pads new??
Sent from my iPhone using Tapatalk
Brake pads have less than 20 miles on them, never even had the chance to bed them into the rotors.
gs werks catch can baffled?
I assume so, It captured a lot of blow by from my old sr. Easy maintenance with the drain valve.
do you still have z32 rears? and where are you located?
Yessir, in Palmdale/Northridge, CA area.
85efi
10-23-2016, 04:01 PM
By any chance, do you have the cas, cam angle sensor?
By any chance, do you have the cas, cam angle sensor?
I would have to check but im pretty sure that I don't.
BUMP FOR THE WEEKEND, Any offers are welcome. I'm feeling generous this holiday weekend, send me your best offers.
Darkcr3w
10-28-2016, 12:27 AM
Sent you a Pm about the CP pistons and Eagle rods
All PMs replied too, bump for thanksgiving deals! PM your offers, I am feeling generous this week.
85efi
11-20-2016, 01:07 AM
Pmed you about the transmission.
driftage240
11-20-2016, 03:29 AM
Still have apex filter?
driftage240
12-16-2016, 03:37 AM
Sup with the Apex-I filter
RalliartRsX
12-20-2016, 10:00 AM
I sent you a PM. Can you get back to me??
Thanks
JDM_GS3
12-20-2016, 10:19 AM
sent another pm your way. didn't hear back the first time.
RyukoSilvia
12-21-2016, 04:50 AM
PM'd you about coilpacks and Apexi intake filter
BoostedRHDS13
01-16-2017, 10:35 AM
Interested in rods and pistons
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.