No heat and it's getting cold ...

[240Chriss]

I've done a bunch of trial and error and as of right now I'm stumped at the blend door. Pretty sure I have it located in just unsure of the way it works... Might sound stupid. Anyways is there any way I could manually open it just so I always have heat? Also whenever I click any other setting besides both hands and feet it squeals and then gives some annoying clicking noise. Not sure if that's related. When I slide it from cold to hot it sounds like something tries to move but I don't see anything moving... Any help cause cold weather & rain is getting hard to drive in

[ixfxi]

how do you know that the heater core works? if your heater core is plugged, you wont get heat. there is also a shut off valve for the core. s13 shutoff is part of the heater box, s14 is in the engine bay.

[jdm-specs]

Don't think the air temp is controlled by any doors on the s13. Just the heater valve like what the previous guy said

[240Chriss]

Don't think the air temp is controlled by any doors on the s13. Just the heater valve like what the previous guy said There's no type of door that allows for coolant to get in the heater core ?

[jdm-specs]

Well u can call it a door...but it's just a heater valve that connects to a cable and the other end of that cable goes to the temp control knob

[jdm-specs]

If ur valve is opening and closing like it should. Try flushing ur heater core or at least pull off one of the heater hose and see if it's filled with crap

[240Chriss]

If ur valve is opening and closing like it should. Try flushing ur heater core or at least pull off one of the heater hose and see if it's filled with crap tried to flush the heater core and it all seemed fine. That's why I'm onto the heater valve. It sounds like it tries to move but nothing does so I'm assuming it's stuck closed? I'm wondering if I could just manually stick it open for now ?

[FaLKoN240]

how do you know that the heater core works? if your heater core is plugged, you wont get heat. there is also a shut off valve for the core. s13 shutoff is part of the heater box, s14 is in the engine bay.

OMG I could've hit a shut off for my core? I just looped the POS because I didn't have time to swap it out before Final Bout :facepalm:

[jdm-specs]

tried to flush the heater core and it all seemed fine. That's why I'm onto the heater valve. It sounds like it tries to move but nothing does so I'm assuming it's stuck closed? I'm wondering if I could just manually stick it open for now ?
If u wanna try to manually open and close it u can follow the cable that connects to ur hvac/heater control knob down to ur heater box. The cable should be attached to a lever on the heater box. U can manually move it there...there's a clip that holds the cable to the hvac control panel that some times falls off

[OBEEWON]

If that doesn't work I just fart all the way to work and don't brush my teeth. Keeps me toasty.