Silvia with NRG seats

[cavalentineusmc]

So I have seen some post about NRG seats and figured I would post on the install of mine. I'm running Planted seat brackets I picked up on Amazon(BTW they fit like s14 seats so I that fourth hole in the back by the door is a pain to get to fit correctly). The seats aren't bad for the price. And for our wider tuners they would work great! The problem with my setup though is that Planted seat brackets sit super high! Does any one know of super low well fitting seat brackets? 87047

Sent from my 202F using Tapatalk

[Croustibat]

Welcome to the marvelous world of "you need side mounts seats on S chassis unless your height is under 4' ".

Next time, ask, THEN buy.

[cavalentineusmc]

Welcome to the marvelous world of "you need side mounts seats on S chassis unless your height is under 4' ".

Next time, ask, THEN buy.
Do you know of any good side mount brackets with sliders?

Sent from my 202F using Tapatalk

[Croustibat]

I am using buddyclub sidemounts, they are available on frsports. They lock on each rail and have various brackets to accomodate any seat.

I have only 1 complain about them; the command to unlock the sliding mechanism needs to be bent to clear the front reinforcement in the chassis, under the seat, if you want to set the seat to the lowest possible setting (which is only a slightly bit lower than where the oem seat sits).

You need to chose your seat carefully too; it need to fit between the rails, so no XL stuff.

[Erollin]

I am using buddyclub sidemounts, they are available on frsports. They lock on each rail and have various brackets to accomodate any seat.




Was looking at sparco or buddyclub, saw some on furiouscustoms and also ebay.



.