Stian1601
06-02-2015, 02:35 AM
Hello!
Small problem im trying to figure out.. I have a s14 track car totally stripped of original wiring and now i have come to the part of wiring up power the Ecu ( power fc d-jetro )
I have constant 12v to pin 58
Ign-switch 12v to pin 45
Start -button 12v to pin 43
Eccs relay working correctly, have measured 12v to pin 49, 59 and 109 when ignition is switched on
I have connected the thick red wire from the f3 plug to ign switch 12v to power up the IGN (coil relay) i think i have done something wrong since now the ecu wont shut down when turn the ign switch off. Only when i kill the main power switch. First i had constant 12 directly from the battery to pin 58 then i had to disconnect battery to turn it off.
I have searched the internet for how this should be wired correctly but havent found any solutions yet.
And one more question! When i set 12v to pin 43 then starter is not cranking. Can someone tell wich pin on the ecu gives signal down to starter?
Small problem im trying to figure out.. I have a s14 track car totally stripped of original wiring and now i have come to the part of wiring up power the Ecu ( power fc d-jetro )
I have constant 12v to pin 58
Ign-switch 12v to pin 45
Start -button 12v to pin 43
Eccs relay working correctly, have measured 12v to pin 49, 59 and 109 when ignition is switched on
I have connected the thick red wire from the f3 plug to ign switch 12v to power up the IGN (coil relay) i think i have done something wrong since now the ecu wont shut down when turn the ign switch off. Only when i kill the main power switch. First i had constant 12 directly from the battery to pin 58 then i had to disconnect battery to turn it off.
I have searched the internet for how this should be wired correctly but havent found any solutions yet.
And one more question! When i set 12v to pin 43 then starter is not cranking. Can someone tell wich pin on the ecu gives signal down to starter?