slidingsideways09
05-26-2015, 02:00 PM
Ived searched hours and found nothing that could help me out, if someone could find the information I'm looking for could you add the link or you know of write write up please post. Thank you
Okay I have a 91 240sx ka24de all stock, since last week i couldn't get the car to turn over and start. Ive check the battery thinking it was dead, but the auto parts store told me it check out good, then i thought it could be the switch behind the clutch,replaced that and no start. then i found out there is an relay on the passenger side fender, I've also replaced that and still no start or crank over. Then i took an multi meter to the starter and had my friend turn the key to the start position and it gets 12v. so then took my multi meter to the starter relay but that gets nothing, so I'm thinking my ignition switch is bad in the start position, so the next day i went and bought an 15amp starter switch, and hooked it by cutting the wire behind the ignition switch, the wire Ive cut was black/yellow and black/white, connected them to the push switch. Tried to start the car again and still got nothing. Right now I'm completely lost. the car does have an kill switch and a viper alarm with a starter kill. Right now I'm thinking about disconnecting the alarm and see if that helps. Oh p.s did try to push start the car manually and the car still did not start. Could anyone help me out?
Okay I have a 91 240sx ka24de all stock, since last week i couldn't get the car to turn over and start. Ive check the battery thinking it was dead, but the auto parts store told me it check out good, then i thought it could be the switch behind the clutch,replaced that and no start. then i found out there is an relay on the passenger side fender, I've also replaced that and still no start or crank over. Then i took an multi meter to the starter and had my friend turn the key to the start position and it gets 12v. so then took my multi meter to the starter relay but that gets nothing, so I'm thinking my ignition switch is bad in the start position, so the next day i went and bought an 15amp starter switch, and hooked it by cutting the wire behind the ignition switch, the wire Ive cut was black/yellow and black/white, connected them to the push switch. Tried to start the car again and still got nothing. Right now I'm completely lost. the car does have an kill switch and a viper alarm with a starter kill. Right now I'm thinking about disconnecting the alarm and see if that helps. Oh p.s did try to push start the car manually and the car still did not start. Could anyone help me out?