PDA

View Full Version : Overfender Guide


StoopidLoose88
04-09-2015, 07:25 AM
Ok I've searched the forum and google and have not found the concrete info I'm looking for. What are all the options for rear over fenders(in my case for an s13 coupe, but I'm fine with someone who has knowledge about s13 hatch/s14/s15 posting so it may help someone down the road!). So far the ones I know of are the Origin overfenders(I'm sure there are many other brands and options I'm missing.)

Origin Type 1 (Available in 50mm)
Origin Type 2 (Available in 50mm)
Origin Tatakadasi fender pull (Available in 30mm/50mm)

I have no clue what any differences are in these three. After doing some image searching on google I found mixed results but the trend seemed to be:

Origin Type 1 - Smooth sides
Origin Type 2 - Stepped sides or Sides with a fine body line in them (not sure which one)
Origin Tatakadasi fender pull - Appears to be type 2 with a molded 'roll' to the fender

If you add please try to put your info in this format and i will add it to the original post

Brand and name of overfender(Sizes its available in)
What s-chassis it is for
Price
A description of its physical appearance/what makes it different

Hopefully we can get some concrete knowledge on this subject and possibly get this to be a full "Overfender Guide" sticky for all the s chassis'

Overfenders Guide:

S13

Origin Lab type 1(50mm)
s13 coupe/hatchback
$306
Thin body line(similar to chargespeeds), follow window/trunk lines, wrap around taillights

Origin Lab type 2(50mm)
s13 coupe/hatchback
$306
Stepped side, follow window/trunk lines, wrap around taillights

Origin Lab type 3(55mm)
s13 coupe/hatchback
$395
OEM body line, flared fender, follow window/trunk lines, wrap around taillights

Origin Lab Tatakadasi fender pull(30mm/50mm)
s13 coupe/hatchback
$306
Appear to be smooth side with flare around wheel well(simulated fender roll), follow window/trunk lines, wrap around taillights

Extreme Dimensions "Gt-R" style/Duraflex B-Sport(50MM)
s13 coupe
$299
Which would be a copy of Origin Type 2, fitment was surprisingly good, they are thin and VERY flexible. Only Issues i have with them are:
1. They do not have the body line (the little bead in the middle of the body)
2. The gas filler cap area needs a bit of work, for the cap to fit (not a big issue though)
Overall very pleased with them. -japslapsilvia

VIS Drift X(30mm)
s13 coupe/hatchback
$249
Look like they follow window/trunk lines, wrap around taillights and have OEM body line through them

chargespeed(50mm)
s13 coupe/hatchback
$499.00
top notch, fitment was absolutely perfect. very little prep work required, I primed and wet sanded once and they were ready for paint. they wrap around the tail lights, and come up to the door. notice how the lines ride the window and trunk lines perfect. they come with a nice gas door assembly, but im a ricer and i like how it looks sunk... overall I love them. -jsu1012

S14

Origin Lab type 2(50mm)
s14
$306
Follow window/trunk/taillight lines, with a stepped side. In my opinion the fit it absolutely horrible. A ton of sanding and straightening has to be done so things line up how they should.

jsu1012
04-09-2015, 09:07 AM
If you really did google and looked at the lines and styles of the overs, you'd have each down within 30 min. but i'll play along.

here's mine:
Brand: chargespeed , 50mm
s13 coupe
price:$659.00 shipped.
quality: top notch, fitment was absolutely perfect. very little prep work required, I primed and wet sanded once and they were ready for paint. they wrap around the tail lights, and come up to the door. notice how the lines ride the window and trunk lines perfect. they come with a nice gas door assembly, but im a ricer and i like how it looks sunk... overall I love them.


http://i1231.photobucket.com/albums/ee504/jsu1012/9D7E2E29-BA52-4FB2-BB15-95E74A85DCBA_zpszh6kmbsf.jpg (http://s1231.photobucket.com/user/jsu1012/media/9D7E2E29-BA52-4FB2-BB15-95E74A85DCBA_zpszh6kmbsf.jpg.html)
http://i1231.photobucket.com/albums/ee504/jsu1012/409F35A8-CCBF-4347-88BF-FD8EB232ADA5_zps77pg0kvx.jpg (http://s1231.photobucket.com/user/jsu1012/media/409F35A8-CCBF-4347-88BF-FD8EB232ADA5_zps77pg0kvx.jpg.html)
http://i1231.photobucket.com/albums/ee504/jsu1012/11280405_10155669663095564_1687675583_n%201_zpsote wuevf.jpg (http://s1231.photobucket.com/user/jsu1012/media/11280405_10155669663095564_1687675583_n%201_zpsote wuevf.jpg.html)
http://i1231.photobucket.com/albums/ee504/jsu1012/9C139368-6E6D-4EB2-9616-D6B152CC8D1E.png_zps7mdg9nsg.jpeg (http://s1231.photobucket.com/user/jsu1012/media/9C139368-6E6D-4EB2-9616-D6B152CC8D1E.png_zps7mdg9nsg.jpeg.html)
http://i1231.photobucket.com/albums/ee504/jsu1012/9061BAA7-CE61-4CB1-BF0B-0A744D679085_zpsyhycytr3.jpg (http://s1231.photobucket.com/user/jsu1012/media/9061BAA7-CE61-4CB1-BF0B-0A744D679085_zpsyhycytr3.jpg.html)
http://i1231.photobucket.com/albums/ee504/jsu1012/48E7BBA5-BDA6-4255-B4F4-38A14AE112D3_zpsam0giz1u.jpg (http://s1231.photobucket.com/user/jsu1012/media/48E7BBA5-BDA6-4255-B4F4-38A14AE112D3_zpsam0giz1u.jpg.html)

StoopidLoose88
04-09-2015, 05:48 PM
If you really did google and looked at the lines and styles of the overs, you'd have each down within 30 min. but i'll play along.

Thank you for contributing, car looks great, I actually follow you on Instagram already lol. How were your overs fastened? Most I've seen are riveted but yours almost look factory smooth.

TurboTiger
04-09-2015, 07:12 PM
If you really did google and looked at the lines and styles of the overs, you'd have each down within 30 min. but i'll play along.

here's mine:
Brand: chargespeed , 50mm
s13 coupe
price:$659.00
quality: top notch, fitment was absolutely perfect. very little prep work required, I primed and wet sanded once and they were ready for paint. they wrap around the tail lights, and come up to the door. notice how the lines ride the window and trunk lines perfect. they come with a nice gas door assembly, but im a ricer and i like how it looks sunk... overall I love them.



Damn. It's refreshing to see a 240 as clean as your on these boards.

DriftingBrandon
04-09-2015, 07:33 PM
Maybe you guys can help me. I'll of course will measure and fine tune myself, but some insight is awesome. 1993 Nissan 240sx S13 (will 5 lug swap) I have Front: 17x10 +5 (215/45/R17) & Rear: 18x11 +25 (245/40/R18) . What spacer/overfender sizes would you think would be the best match. I want atleast 50mm rear fender, atleast 25mm front. Thanks!

jsu1012
04-09-2015, 07:42 PM
Thank you for contributing, car looks great, I actually follow you on Instagram already lol. How were your overs fastened? Most I've seen are riveted but yours almost look factory smooth.
Lol right on. Mine are pop riveted .

Damn. It's refreshing to see a 240 as clean as your on these boards.

Thanks man.

Maybe you guys can help me. I'll of course will measure and fine tune myself, but some insight is awesome. 1993 Nissan 240sx S13 (will 5 lug swap) I have Front: 17x10 +5 (215/45/R17) & Rear: 18x11 +25 (245/40/R18) . What spacer/overfender sizes would you think would be the best match. I want atleast 50mm rear fender, atleast 25mm front. Thanks!

Depends on how much camber you want to run. That front size would be too easy. I did 18x10.5 , -3 up front on metal fender. The rear depending on ride height and camber would be 12-20mm spacers .

StoopidLoose88
04-10-2015, 07:27 AM
Ok I updated the original post to start consolidating the information lol I hope to make this a pretty full guide for people looking into overfenders

japslapsilvia
04-10-2015, 07:57 AM
Here is mine, they are Extreme Dimensions "Gt-R" style 50MM, Which would be a copy of Origin Type 2.

Fitment was surprisingly good, they are thin and VERY flexible. Only Issues i have with them are:
1. They do not have the body line (the little bead in the middle of the body)
2. The gas filler cap area needs a bit of work, for the cap to fit (not a big issue though)
Overall very pleased with them.

this is just tape holding them on
http://i68.photobucket.com/albums/i7/japslapsilvia/20141015_180343_zps078e1a78.jpg (http://s68.photobucket.com/user/japslapsilvia/media/20141015_180343_zps078e1a78.jpg.html)

I used Rivit Nuts to fasten them (low profile allen head screws)

http://i68.photobucket.com/albums/i7/japslapsilvia/20141016_203234_zps72fd66d8.jpg (http://s68.photobucket.com/user/japslapsilvia/media/20141016_203234_zps72fd66d8.jpg.html)

http://i68.photobucket.com/albums/i7/japslapsilvia/20141110_172659_zps4650f596.jpg (http://s68.photobucket.com/user/japslapsilvia/media/20141110_172659_zps4650f596.jpg.html)

Sorry i dont currently have any better pics of the back

xGhettosledx
04-10-2015, 08:21 AM
I have authentic origin type 2 50mm rears on my s14 and in my opinion the fit it absolutely horrible. A ton of sanding and straightening has to be done so things line up how they should.

henjupole
04-11-2015, 06:22 AM
It's refreshing to see a 240 as clean as your on these boards.http://goo.gl/NQIZBB

StoopidLoose88
04-11-2015, 06:30 AM
Here is mine, they are Extreme Dimensions "Gt-R" style 50MM, Which would be a copy of Origin Type 2.



Fitment was surprisingly good, they are thin and VERY flexible. Only Issues i have with them are:

1. They do not have the body line (the little bead in the middle of the body)

2. The gas filler cap area needs a bit of work, for the cap to fit (not a big issue though)

Overall very pleased with them.


They look really good though, I'll add the info for these to the original post!

I have authentic origin type 2 50mm rears on my s14 and in my opinion the fit it absolutely horrible. A ton of sanding and straightening has to be done so things line up how they should.


Congrats, you're the first s14 to post in this thread! Lol but that surprises me, previously I had never heard anything bad about origin products, but it has been noted and I'll post this in the original post, thanks!


Sent from my iPhone using Tapatalk

DennisC
04-13-2015, 12:51 PM
Extreme Dimensions Duraflex M-1 Sport 30mm Rear over fenders for S14
Fitment-9/10
Fit very well once bolted on and I just had to fix a few very minor cracks. Required no trimming.
http://i1380.photobucket.com/albums/ah172/DennisC94/IMG_0864_zpsvz8j2ljr.jpg
Only held on with tape
http://i1380.photobucket.com/albums/ah172/DennisC94/IMG_0880_zpshsn9nnyf.jpg
Primed and block sanded
http://i1380.photobucket.com/albums/ah172/DennisC94/IMG_0920_zpsdikdqprd.jpg
Test fitted with only 8 screws
http://i1380.photobucket.com/albums/ah172/DennisC94/IMG_0021_zpsswnm2ddj.jpg
http://i1380.photobucket.com/albums/ah172/DennisC94/IMG_0023_zpstl9aaffp.jpg
Painted and installed with 25 rivnuts/screws per side

jsu1012
04-13-2015, 01:19 PM
when you need 25 rivets on each side i dont think its a 9/10 fitment lol. driver side in front of the wheel the panel is cut at an angle or what?

bigs
04-13-2015, 01:24 PM
Fitment-9/10

Those look like they fit like absolute shit...

StatticMyke
04-13-2015, 01:25 PM
Extreme Dimensions Duraflex M-1 Sport 30mm Rear over fenders for S14
Fitment-9/10
Fit very well once bolted on and I just had to fix a few very minor cracks. Required no trimming.

Painted and installed with 25 rivnuts/screws per side

:down::down::down:
9/10 wtf???? Both sides have obvious differences in how they are cut. On the drivers side there is a gap in the front of the fender well. Whats up with the passenger side around the tail light? Looks like a kid cut it with some scissors.

DennisC
04-13-2015, 01:35 PM
It's extreme dimensions... wasn't expecting perfect looking parts. Maybe I gave it too high of a rating then if you guys really think it fits that bad. For the price I got them for and they fit right on out of the box, I think it was worth the money. The main reason I got them was to cover up my quarter panel bondo job by a previous owner.
when you need 25 rivets on each side i dont think its a 9/10 fitment lol. driver side in front of the wheel the panel is cut at an angle or what?
25 is just about what every one else uses.

Martino
04-13-2015, 03:22 PM
25 is just about what every one else uses.


More like 8 - 10 lol

BoostinIX
04-14-2015, 04:17 AM
Dmax are lookin spiffy for the price

jsu1012
04-14-2015, 07:51 AM
25 is just about what every one else uses.

lol na man . i used maybe 8-10.

simmode1
04-14-2015, 09:43 AM
Nevermind. Wrong thread.

DriftingBrandon
04-15-2015, 05:43 AM
Edited: repost

blueshark123
04-15-2015, 07:15 AM
get 50mm fenders^

DriftingBrandon
04-15-2015, 10:09 AM
get 50mm fenders^

I Think so too. The previous owner just told me he ran a 27mm (1.06) spacer with a 50mm fender and the fitment was perfect. My 1" spacer should be around the same. Shouldn't make a huge difference. I always have the option to tuck my 18's

Link to his pictures: http://zilvia.net/f/showthread.php?t=594403

DriftingBrandon
04-15-2015, 03:22 PM
I need Coilovers I'll run probably -5 camber. but what fenders should fit my car? 18x11 +25 with an 1" spacer. 30mm or 50mm?

https://imageshack.com/i/ex1STXsOj
-
https://imageshack.com/i/exWHQUauj
-
https://imageshack.com/i/exN4BOycj

Images are now Visable.

DriftingBrandon
04-15-2015, 09:10 PM
First photo is a 30mm over fender on the REAR placed on the side. I think 50mm rear is the idle size. OKAY. The front... front Wheels. 17x10 +5 with a 1" spacer. I think 30mm front will be perfect with some camber.
http://i1062.photobucket.com/albums/t498/driftingbrandonTopazBrandon/IMG_2791_zpswcl8c8og.jpg (http://s1062.photobucket.com/user/driftingbrandonTopazBrandon/media/IMG_2791_zpswcl8c8og.jpg.html)
http://i1062.photobucket.com/albums/t498/driftingbrandonTopazBrandon/IMG_2803_zpsj0i6xxw1.jpg (http://s1062.photobucket.com/user/driftingbrandonTopazBrandon/media/IMG_2803_zpsj0i6xxw1.jpg.html)
http://i1062.photobucket.com/albums/t498/driftingbrandonTopazBrandon/IMG_2801_zpszg1qr17z.jpg (http://s1062.photobucket.com/user/driftingbrandonTopazBrandon/media/IMG_2801_zpszg1qr17z.jpg.html)

Kuma
04-15-2015, 09:48 PM
is the 1" spacer necessary? seems like if 50mm overs were perfect with 1" spacers, 30mm overs should be really close without 1" spacers... might have to run without camber, but I don't personally see that as a bad thing.

MR_GUTTI
04-15-2015, 10:15 PM
I agree with Kuma, maybe because I'm not a fan of the 50mm over! I will remove the spacer and use the 30mm

http://i949.photobucket.com/albums/ad333/MR_GUTTI/Mobile%20Uploads/0CAE2291-687C-4A5A-858E-19D9C8DF8834.jpg (http://s949.photobucket.com/user/MR_GUTTI/media/Mobile%20Uploads/0CAE2291-687C-4A5A-858E-19D9C8DF8834.jpg.html)
I have 18x10.5 +0 with no spacer and 30mm over ( I still need to add camber )

DriftingBrandon
04-15-2015, 10:35 PM
I agree with Kuma, maybe because I'm not a fan of the 50mm over! I will remove the spacer and use the 30mm

http://i949.photobucket.com/albums/ad333/MR_GUTTI/Mobile%20Uploads/0CAE2291-687C-4A5A-858E-19D9C8DF8834.jpg (http://s949.photobucket.com/user/MR_GUTTI/media/Mobile%20Uploads/0CAE2291-687C-4A5A-858E-19D9C8DF8834.jpg.html)
I have 18x10.5 +0 with no spacer and 30mm over ( I still need to add camber )
Nice, yes my goal is F: 30mm R: 50mm. I love the 50mm because when you look from the back. The wheel and tire is showing from the side, yet isn't poking out of the fender.

http://i1062.photobucket.com/albums/t498/driftingbrandonTopazBrandon/IMG_28161_zpsrprrizix.jpg (http://s1062.photobucket.com/user/driftingbrandonTopazBrandon/media/IMG_28161_zpsrprrizix.jpg.html)

gallo
04-16-2015, 10:54 AM
Vis 25mm front and rear. fit good no modification just rivet them right in
http://i1244.photobucket.com/albums/gg580/Juan_Gallo/11083657_812682028767953_9191159144807123482_n_zps do4whq1g.jpg (http://s1244.photobucket.com/user/Juan_Gallo/media/11083657_812682028767953_9191159144807123482_n_zps do4whq1g.jpg.html)
http://i1244.photobucket.com/albums/gg580/Juan_Gallo/10996524_810128055690017_121552282071821725_n_zpsg rimtdjc.jpg (http://s1244.photobucket.com/user/Juan_Gallo/media/10996524_810128055690017_121552282071821725_n_zpsg rimtdjc.jpg.html)

DriftingBrandon
04-16-2015, 11:39 AM
Do they make 30mm front s13(pop up) 180sx front fenders? 30mm would be perfect. I've been doing some searching and haven't found anything but 30mm rears.

How is VIS fitment? I could go 25mm with a ton of camber lol

Martino
04-16-2015, 11:57 AM
Do they make 30mm front s13(pop up) 180sx front fenders? 30mm would be perfect. I've been doing some searching and haven't found anything but 30mm rears.

How is VIS fitment? I could go 25mm with a ton of camber lol

I have 25mm fronts as well and honestly I WANT that extra 5mm a 30 would give me lol.

DriftingBrandon
04-16-2015, 02:47 PM
I have 25mm fronts as well and honestly I WANT that extra 5mm a 30 would give me lol.
What are your specs / spacers

DriftingBrandon
04-17-2015, 04:35 AM
bump to the top

DriftingBrandon
04-17-2015, 04:10 PM
Bump to the top

Martino
04-17-2015, 05:47 PM
18 x 9: effectively -3

DriftingBrandon
04-18-2015, 11:37 AM
18 x 9: effectively -3

I'' just get 20mm front and 50mm rear

eastcoaststeeze
04-20-2015, 07:47 AM
Here is for the S14:

Front: Origin Lab (type 3) 45mm vented fenders
- fit nice and good quality, had to drill holes for mounting

Rear: Origin Lab (Type 3) 55mm overs
- horrible fitting, lots of sanding, wouldnt even sit right and when trying to mount you can see stress cracks forming. So I cut them up and had to mold them to the car as there was no other option

http://scontent-b.cdninstagram.com/hphotos-xaf1/t51.2885-15/10561206_537497936379004_788014174_n.jpg

http://scontent-a.cdninstagram.com/hphotos-xfa1/t51.2885-15/10706954_898508103501394_842027789_n.jpg

(disregard the zenki hood)

http://scontent-b.cdninstagram.com/hphotos-xpa1/t51.2885-15/925964_1555530958001051_938484567_n.jpg

http://v2lab.com/blog/wp-content/uploads/2014/11/vippat.jpg

http://scontent-a.cdninstagram.com/hphotos-xfa1/t51.2885-15/e15/10914431_425908164232739_626203343_n.jpg

http://scontent-b.cdninstagram.com/hphotos-xfp1/t51.2885-15/e15/10413063_1597088877174160_39702292_n.jpg

https://scontent.cdninstagram.com/hphotos-xap1/t51.2885-15/e15/928788_1409396656035771_490059562_n.jpg

DriftingBrandon
04-20-2015, 08:16 AM
Could have sent them back. I will if I get craps products.

eastcoaststeeze
04-20-2015, 02:57 PM
Could have sent them back. I will if I get craps products.

as much as I would have liked to, I didnt have time to as I was on a time crunch to get the car completed and to Sema, so i had to mold them to the car instead.

StoopidLoose88
04-20-2015, 03:53 PM
Here is for the S14:

Front: Origin Lab (type 3) 45mm vented fenders
- fit nice and good quality, had to drill holes for mounting

Rear: Origin Lab (Type 3) 55mm overs
- horrible fitting, lots of sanding, wouldnt even sit right and when trying to mount you can see stress cracks forming. So I cut them up and had to mold them to the car as there was no other option

Bummer that they didnt work out of the box but the final product looks great!

Bushido
04-20-2015, 04:10 PM
rear quarters are the only area where molding is acceptable imo.

Kuma
04-20-2015, 08:45 PM
anyone have detailed pics of charge speed rears on s14? I was planning on going origin, but now I'm unsure... eastcoaststeeze pulled them off nicely, but if charge speed has better out of box fitment I'm sold.

slutz4
04-20-2015, 09:37 PM
Chargespeeds fitment is virtually flawless. If I wasnt lazy Id upload some pics on here of my s14.

Renelovesnike
04-20-2015, 11:15 PM
^ ^ ^ ^

@ KUMA

ChargeSpeed +50's on s14's fit flawlessly out the box!! could not be happy'er with an out of the box aftermarket product.

1Day
04-21-2015, 07:02 AM
anyone have detailed pics of charge speed rears on s14? I was planning on going origin, but now I'm unsure... eastcoaststeeze pulled them off nicely, but if charge speed has better out of box fitment I'm sold.

Here are a couple of mine at mock up stage, I think the skirt was the only thing holding them on.

http://i159.photobucket.com/albums/t148/j_mcgill/Disc%20Pics%20320_zpsugwjg3qn.jpg (http://s159.photobucket.com/user/j_mcgill/media/Disc%20Pics%20320_zpsugwjg3qn.jpg.html)

http://i159.photobucket.com/albums/t148/j_mcgill/Disc%20Pics%20319_zpsjf1ik8lx.jpg (http://s159.photobucket.com/user/j_mcgill/media/Disc%20Pics%20319_zpsjf1ik8lx.jpg.html)

Used these, rivnuts, to mount them for easy removal (9 per side)

http://i159.photobucket.com/albums/t148/j_mcgill/FILE0339.jpg (http://s159.photobucket.com/user/j_mcgill/media/FILE0339.jpg.html)

Mounted

http://i159.photobucket.com/albums/t148/j_mcgill/Disc%20Pics%20096_zpsjttveo7g.jpg (http://s159.photobucket.com/user/j_mcgill/media/Disc%20Pics%20096_zpsjttveo7g.jpg.html)

http://i159.photobucket.com/albums/t148/j_mcgill/Disc%20Pics%20101_zps3vwmss3d.jpg (http://s159.photobucket.com/user/j_mcgill/media/Disc%20Pics%20101_zps3vwmss3d.jpg.html)

http://i159.photobucket.com/albums/t148/j_mcgill/1394788_564227697490_2125393651_n_zpscf4ugubv.jpg (http://s159.photobucket.com/user/j_mcgill/media/1394788_564227697490_2125393651_n_zpscf4ugubv.jpg. html)

OBEEWON
04-21-2015, 10:32 AM
Looks dope. Rivnuts are the way to go. What size did you use? I need to get some

1Day
04-21-2015, 11:25 AM
Looks dope. Rivnuts are the way to go. What size did you use? I need to get some

M5? The part number is from Fastenal and I used SS button head bolts. I totally took the idea/part #, whole shebang, from a Modified Mag. article they did about putting overs on a time attack S2000. (March '10 was the issue)

Kuma
04-21-2015, 11:54 AM
Thanks 1day! Your car looks great.

StoopidLoose88
04-21-2015, 11:58 AM
Here are a couple of mine at mock up stage, I think the skirt was the only thing holding them on.


Those look great, those are the 50mm charge speed ones, right? I'll add those to the OP later. May I ask why you decided to go with rivnuts over just rivets?



Sent from my iPhone using Tapatalk

1Day
04-21-2015, 02:24 PM
Thanks guys. Correct 50mm chargespeed's, I went with Rivnut mainly for cleaning. I get a lot of small stones behind them.

I'm so bummed about the quality of the origin type 3's. I was thinking about selling mine for those but IDK now.

bataangpinoy
04-21-2015, 11:04 PM
I have authentic origin type 2 50mm rears on my s14 and in my opinion the fit it absolutely horrible. A ton of sanding and straightening has to be done so things line up how they should.

+1

30mm Tatakadasi rears on my coupe, with 20mm silvia fenders for the front.. fitment is junk.

Fronts:
1) Front wheel arches are not even from side to side (caster is dead even)
2) Lots of air pockets/defects in the right front fender. I watched chucks of the fender fall off/chip away as i was fitting it to the car. I would drill, and the fender would chunk.
3) Driver front fender is also molded 'short' in relation to the hood, the gap is very large compared to the other side.
4) Couldn't get the fender to line up right with the bumper, i'll have to add material to the flange to be able to center the fender.

Rears:
Fitment with these is a bit better, but still lots of work required to get them on properly. This time, the pass. rear fender seems to be cut short, and warped? I'm guessing this is due to the provision for the gas flap. Driver side rear over fender went on much easier, but seems to have more flare than the pass. side.


Would not buy this crap again at 350 per pair, would rather buy the shitty ones from VIS if I have to work the fenders this much to get them to even come close to fitting.

livelovesole
04-30-2015, 03:23 PM
I've searched for this stuff already but not coming up with anything, but Can anyone upload a s13 hatch with chargespeed 50mm rear overs ? Cant find many. I got a decent sized dent on the body line of my hatch so i feel like the best way to fix it is overfenders. And if anyone can tell me how 18x10.5 fit with 50mm overs as well too that'd be great.

StatticMyke
05-01-2015, 10:25 AM
FineLine Tuning 50MM
S13 Hatch
$299 before shipping. Think $350 shipped
Tatakidashi reps pretty much, or very similar.
Actually fit pretty damn well. A little bit of trimming but that's it really. I'd say 7/10 at minimum.
http://i120.photobucket.com/albums/o184/michaelpotts/341F1597-D561-4EC6-A31C-D288D7A89198_zpsvzjbu0tm.jpg (http://s120.photobucket.com/user/michaelpotts/media/341F1597-D561-4EC6-A31C-D288D7A89198_zpsvzjbu0tm.jpg.html)
http://i120.photobucket.com/albums/o184/michaelpotts/4B595EEE-8DF6-4CAF-A486-17987D4A58B8_zpsni4yl6uk.jpg (http://s120.photobucket.com/user/michaelpotts/media/4B595EEE-8DF6-4CAF-A486-17987D4A58B8_zpsni4yl6uk.jpg.html)
Don't really have any other close ups but I can get some if someone wants to see them.
http://i120.photobucket.com/albums/o184/michaelpotts/CA8199F7-5B5E-48A2-81E5-47309779827A_zpsqtfn07n4.jpg (http://s120.photobucket.com/user/michaelpotts/media/CA8199F7-5B5E-48A2-81E5-47309779827A_zpsqtfn07n4.jpg.html)
http://i120.photobucket.com/albums/o184/michaelpotts/033A72E3-28AA-460D-A8CD-02EAD58D8496_zpsx7cggnmk.jpg (http://s120.photobucket.com/user/michaelpotts/media/033A72E3-28AA-460D-A8CD-02EAD58D8496_zpsx7cggnmk.jpg.html)
http://i120.photobucket.com/albums/o184/michaelpotts/B28D72A1-547B-4FEE-A1C4-E102D24EE1C1_zpst5avgdsd.jpg (http://s120.photobucket.com/user/michaelpotts/media/B28D72A1-547B-4FEE-A1C4-E102D24EE1C1_zpst5avgdsd.jpg.html)

jefferz
05-01-2015, 10:34 AM
M5? The part number is from Fastenal and I used SS button head bolts. I totally took the idea/part #, whole shebang, from a Modified Mag. article they did about putting overs on a time attack S2000. (March '10 was the issue)


I Did riv nuts for my overfenders we use all the time for other builds. they help with everything

DriftingBrandon
05-01-2015, 12:06 PM
FineLine Tuning 50MM
S13 Hatch
$299 before shipping. Think $350 shipped
Tatakidashi reps pretty much, or very similar.
Actually fit pretty damn well. A little bit of trimming but that's it really. I'd say 7/10 at minimum.
http://i120.photobucket.com/albums/o184/michaelpotts/341F1597-D561-4EC6-A31C-D288D7A89198_zpsvzjbu0tm.jpg (http://s120.photobucket.com/user/michaelpotts/media/341F1597-D561-4EC6-A31C-D288D7A89198_zpsvzjbu0tm.jpg.html)
http://i120.photobucket.com/albums/o184/michaelpotts/4B595EEE-8DF6-4CAF-A486-17987D4A58B8_zpsni4yl6uk.jpg (http://s120.photobucket.com/user/michaelpotts/media/4B595EEE-8DF6-4CAF-A486-17987D4A58B8_zpsni4yl6uk.jpg.html)
Don't really have any other close ups but I can get some if someone wants to see them.
http://i120.photobucket.com/albums/o184/michaelpotts/CA8199F7-5B5E-48A2-81E5-47309779827A_zpsqtfn07n4.jpg (http://s120.photobucket.com/user/michaelpotts/media/CA8199F7-5B5E-48A2-81E5-47309779827A_zpsqtfn07n4.jpg.html)
http://i120.photobucket.com/albums/o184/michaelpotts/033A72E3-28AA-460D-A8CD-02EAD58D8496_zpsx7cggnmk.jpg (http://s120.photobucket.com/user/michaelpotts/media/033A72E3-28AA-460D-A8CD-02EAD58D8496_zpsx7cggnmk.jpg.html)
http://i120.photobucket.com/albums/o184/michaelpotts/B28D72A1-547B-4FEE-A1C4-E102D24EE1C1_zpst5avgdsd.jpg (http://s120.photobucket.com/user/michaelpotts/media/B28D72A1-547B-4FEE-A1C4-E102D24EE1C1_zpst5avgdsd.jpg.html)

What size wheel, and spacers? Because I have a 18x11 (you have 18x9.5) I have 25mm spacer (idk about you) and it looks to be that my wheel still wont fit flush and will be tucked a little

hellaslows13
05-01-2015, 12:53 PM
CHARGESPEED 50MM. PBM REAR DROP AND PBM LCA. 18x12 +7 -3.8 camber.

http://41.media.tumblr.com/8c1eff77a2caf4ddbc76485505b454b0/tumblr_nm8uzjT5Lk1qzb388o1_1280.jpg

http://40.media.tumblr.com/94b188a6bb8ec9f2cab9487db50c11d5/tumblr_nm0ity15Kc1qzb388o1_1280.jpg

http://36.media.tumblr.com/e6cd1fd202490967dc21412ce5ca3b1e/tumblr_nl4ohqkKTT1qzb388o1_1280.jpg

StatticMyke
05-01-2015, 12:56 PM
What size wheel, and spacers? Because I have a 18x11 (you have 18x9.5) I have 25mm spacer (idk about you) and it looks to be that my wheel still wont fit flush and will be tucked a little

18x9.5 +15 with a 30mm spacer. Rear quarters were fu*ked is why I went with overs.

gallo
05-01-2015, 02:09 PM
30 up front would be great 25 is not to bad in the rear

Cpreston
05-02-2015, 07:13 PM
Anyone have any pictures or info about the gtp f kon-x s13 overfenders?

DriftingBrandon
05-02-2015, 09:46 PM
http://i1062.photobucket.com/albums/t498/driftingbrandonTopazBrandon/IMG_2803_zpsj0i6xxw1.jpg (http://s1062.photobucket.com/user/driftingbrandonTopazBrandon/media/IMG_2803_zpsj0i6xxw1.jpg.html)[/IMG]
[IMG]

Cpreston
05-02-2015, 09:49 PM
-
I'm picking up 50mm rear overfenders. What do you think the fitment will be like?

Looks like it'll be about perfect

50mm is about exactly 2 inches, measure the tire showing and see what you think

Martino
05-07-2015, 08:23 AM
I'm using 9 rivnuts on 30mm (may add one more).
Basically all the edges are held down which should account to 9 or 10.

They're unpainted/unfinished so it's a little harder to see.

http://imagizer.imageshack.us/v2/1024x768q90/673/YjxcYp.jpg

zbarsuglia
05-20-2015, 06:52 PM
Just got word from my body shop that they might not even be able to put on one of my type 3 origin fenders up front because the fitment is so shitty.

I'm going to email pictures to enjukuracing and see what they can do. I didn't spend 800+ dollars for shitty fitting over fenders. Step up your game origin.

OBEEWON
05-21-2015, 09:43 AM
Yesss. I spent $250 for crappy fitting overs.

Mr. white
05-21-2015, 12:32 PM
What brand did you get?

OBEEWON
05-21-2015, 12:37 PM
Duraflex is the only easily available brand for the SC300. Actually they aren't that bad but not great either.

https://farm8.staticflickr.com/7773/17753181668_497a60eff4.jpg

Mr. white
05-23-2015, 02:00 PM
Ahh, I see. I bought their GT1 replica kit and it fit pretty good. I just bought some of their G corporation reps for front and rear. I will update with what I find once they arrive since this thread only has them for the coupe.

gallo
06-25-2015, 12:43 PM
anyone use 30 or 50 mm over fenders on s14? anyone got any pics of fitment?

OBEEWON
06-25-2015, 01:16 PM
Used M6 rivnuts and black oxide button head bolts. I painted and didn't put all the bolts back in yet. I need to hit them with clear or some black because they rust. DUH. Brain fart there. Aside from that the overs fit pretty good and I didn't need to do so many bolts. I just drilled out the templates without thinking about it. The dress up bolts are temp.

https://farm1.staticflickr.com/432/18929144040_e4c70f5776_b.jpg

Kuma
06-25-2015, 02:54 PM
^ I spy double stitched diamonds. I want to see more of that interior.

Here's a question. What are the widest overfenders (or flares) out there for an s14? All I could find is 50mm overs, which I thought about putting flares over the overs... Until I saw this pic. I don't really like the look... Especially since I'm not running any other aero.
http://i8.photobucket.com/albums/a10/evakanas/DSCN5014.jpg


What overs are these?
http://i18.photobucket.com/albums/b133/nick3889/337269_51_full.jpg
http://i18.photobucket.com/albums/b133/nick3889/337269_44_full.jpg

slider2828
06-25-2015, 03:35 PM
How far up do you guys cut away? I am about to do mine. Some people say 2" from at the high point, so middle of arch?

tschmidt55
06-25-2015, 08:45 PM
subbed this could come in handy

hellion240sx
07-01-2015, 01:28 PM
I have been looking for some rsb/rocketbunny/6666 over fenders for an s14 kouki front... Do they even exist?

yomisiu
07-01-2015, 02:07 PM
What overs are these?
http://i18.photobucket.com/albums/b133/nick3889/337269_51_full.jpg


custom metal, iirc.

Kuma
07-01-2015, 02:46 PM
custom metal, iirc.

Thank you very much.

deolio
07-01-2015, 03:57 PM
overflanders.

Chris28
07-01-2015, 04:26 PM
Brand: Origin Tatakidashi 50mm
Vehicle: s13 hatch
Price: $295

https://scontent-iad3-1.xx.fbcdn.net/hphotos-xpf1/v/t1.0-9/1794688_10153381329414935_5523739678689615508_n.jp g?oh=c3bb1140fc98d0c45a7a420bb96b9a6d&oe=5633935C

https://scontent-iad3-1.xx.fbcdn.net/hphotos-xfa1/v/t1.0-9/11667369_10153408952969935_7861035558759186414_n.j pg?oh=d5f3a6c0784a840c2084ce0a491d920f&oe=561A2984

http://i.imgur.com/3TR7ELK.jpg

http://i.imgur.com/a3LeQDJ.jpg

Fitment is great, a little trimming required to mount side skirts but other than that I'm impressed with them. Rears are VERY thin. Mounted them with riv-nuts and button head bolts.

Kuma
07-01-2015, 06:18 PM
overflanders.

I know... I was hoping someone has executed it better, but no matter how I picture it, I can't see it turning out nice. not looking forward to making my own overs.

the head
07-02-2015, 07:49 AM
How wide are the BN S14 rears? they usually have some wider stuff.

Camsauce
08-03-2015, 10:51 AM
I've read about people having VIS Drift 25mm overs, where can I find a pair? I've only seen 30mm

jsu1012
08-03-2015, 12:17 PM
Brand: Origin Tatakidashi 50mm
Vehicle: s13 hatch
Price: $295

Why do the front and rear wheel arches look so bad? because origin?

onehundredoctane
08-03-2015, 12:24 PM
Brand: Origin Type 3, 55mm
Vehicle: S13 coupe
Price: $465 shipped (shipping killed it for sure)

Overall fitment is very nice, I've had to sand a few edges and corners here and there but nothing crazy. Would def purchase them again. Now if I could only find the type 3, 50mm front fenders in stock somewhere :picardfp:

https://farm4.staticflickr.com/3843/14765997701_4b4521a4e1.jpg

https://farm4.staticflickr.com/3848/14865943146_d41d66a77c.jpg

https://farm4.staticflickr.com/3898/14888589282_a6c8fac7b2.jpg

With Stylish Kit
https://farm4.staticflickr.com/3925/14702387587_315601f53b.jpg

https://farm6.staticflickr.com/5561/14885864981_f38cbefa36.jpg

With 18x11.5 +2 rear wheels
https://farm4.staticflickr.com/3913/14878541029_552bc72ac1.jpg

https://farm4.staticflickr.com/3871/15062217281_8a6ea0ee54.jpg

pacotaco345
08-03-2015, 08:14 PM
Holy number of rivets batman

Camsauce
08-03-2015, 08:32 PM
Recommendations on where to cop 30mm hatch rear overs where I won't get #REKT with shipping?

onehundredoctane
08-04-2015, 07:33 AM
Holy number of rivets batman

And they were all measured and equally spaced apart.

:)

sviellvoicae
08-05-2015, 12:14 AM
Origin Type 2 50mm
$323
18x12-6
They fit really well. My only complaint was how much inner lip these had. I cut off about 3" of inner lip. Other than that I have zero complaints. These are on with 4 rivets each side.

http://i27.photobucket.com/albums/c189/veloce240sx/76A7D21F-A26C-4C2F-8E77-E94880107C8F.jpg (http://s27.photobucket.com/user/veloce240sx/media/76A7D21F-A26C-4C2F-8E77-E94880107C8F.jpg.html)

http://i27.photobucket.com/albums/c189/veloce240sx/A5DD8D95-A929-440E-83FC-9746ABE72A98.jpg (http://s27.photobucket.com/user/veloce240sx/media/A5DD8D95-A929-440E-83FC-9746ABE72A98.jpg.html)

Nissansota240
08-05-2015, 03:09 PM
Bought orgin type 1 overs for my s14, fit like they are only 30mm, kinda upset with them, will be bowing them to fit a bit better.

Will probably be buying some Orgin Type 2's this winter to replace them.

http://i1208.photobucket.com/albums/cc362/Nissansota/Zenki%20Drift%20Build/20150517_000037_zpsgms0l61i.jpg (http://s1208.photobucket.com/user/Nissansota/media/Zenki%20Drift%20Build/20150517_000037_zpsgms0l61i.jpg.html)
Thats a 18x9.5 +15 and it fits way to close, these seem about the same size as a friends Bmagic 30mm.

http://toptierimports.com/wp/wp-content/uploads/2015/06/DSC_8584.jpg

ehhhregartless
08-05-2015, 06:45 PM
Spirit Rei

http://mduece.files.wordpress.com/2014/02/12834510473_8e53877334_b.jpg?w=800
http://mduece.files.wordpress.com/2014/02/12834512133_2f961c5908_b.jpg?w=800G]

sil80takashi
08-05-2015, 07:22 PM
for those with over rears, please flush fit the fuel filler door if you already haven't

rhosking
08-05-2015, 08:20 PM
Hey just bought a s14 "kouki" with major rear fender damage I was thinking about buying the origin type 2s because they look like the closest fit but seems everyone hates these just looking for advice a body shop quoted me 1600 to fix it but of course I'll never do the smart costly option :facepalm: have done body work before but never did over fenders

burnsauto
08-05-2015, 08:36 PM
Hey just bought a s14 "kouki" with major rear fender damage I was thinking about buying the origin type 2s because they look like the closest fit but seems everyone hates these just looking for advice a body shop quoted me 1600 to fix it but of course I'll never do the smart costly option :facepalm: have done body work before but never did over fenders


Is this the car that was in the philly area where the guy got side swiped and didn't know if he should keep the car or not? ...guess he didn't. lol.


It needs a quarter. Just put a quarter panel on it. Don't do what you're thinking. It won't go well.

rhosking
08-05-2015, 08:51 PM
Is this the car that was in the philly area where the guy got side swiped and didn't know if he should keep the car or not? ...guess he didn't. lol.


It needs a quarter. Just put a quarter panel on it. Don't do what you're thinking. It won't go well.


Oh shit i did not think any body sold regular quarters i just found them thanks!!
But yeah i bought it off him the car is honestly pretty clean i think saving it would be better/easyer than a swap

burnsauto
08-05-2015, 09:08 PM
www.partsfornissans.com (http://www.partsfornissans.com) , www.courtesyparts.com (http://www.courtesyparts.com)

Those should get you to a good start.

rhosking
08-05-2015, 09:19 PM
yeah thanks i should be able to manage replacing this

stev0n
09-03-2015, 02:49 PM
Origin Type 2 50mm
$323
18x12-6
They fit really well. My only complaint was how much inner lip these had. I cut off about 3" of inner lip. Other than that I have zero complaints. These are on with 4 rivets each side.

http://i27.photobucket.com/albums/c189/veloce240sx/76A7D21F-A26C-4C2F-8E77-E94880107C8F.jpg (http://s27.photobucket.com/user/veloce240sx/media/76A7D21F-A26C-4C2F-8E77-E94880107C8F.jpg.html)

How recently & where did you purchase these?
do you have any full side pics and/or pics of where the door & quarter meet? how about without side skirts? does the over go all the way down to the rocker like the extreme dimensions below?
I love the look & fitment, but the other origin horror stories are scaring me...


Here is mine, they are Extreme Dimensions "Gt-R" style 50MM, Which would be a copy of Origin Type 2.

Fitment was surprisingly good, they are thin and VERY flexible. Only Issues i have with them are:
1. They do not have the body line (the little bead in the middle of the body)
2. The gas filler cap area needs a bit of work, for the cap to fit (not a big issue though)
Overall very pleased with them.

this is just tape holding them on
http://i68.photobucket.com/albums/i7/japslapsilvia/20141015_180343_zps078e1a78.jpg

Has anyone put these on a hatch to know if fitment is as good or better than origin? Like the quote above this?

Anyone have any advice on which way to go between these two for a hatch? We've never done fiberglass overfenders in our school shop before & want to rivet/cover them like jsu1012 did. Not wanting fitment so bad we have to mold them in to not look like garbage.

Mr. white
09-04-2015, 06:49 AM
I bought those for both front and rear. front fit really well. Im satisfied with rear is well, but, the way they were cut is a little jagged and there is are tiny gaps where they wrap around the tail lamps. you would really have to look for them, though

stev0n
09-05-2015, 12:32 AM
I bought those for both front and rear. front fit really well. Im satisfied with rear is well, but, the way they were cut is a little jagged and there is are tiny gaps where they wrap around the tail lamps. you would really have to look for them, though

which ones did you buy?

ehhhregartless
09-06-2015, 03:52 PM
https://farm6.staticflickr.com/5727/20812693602_44aff4ac6f_b.jpg

StoopidLoose88
09-06-2015, 07:07 PM
Hopefully I won't get flamed for asking this but has anyone ever tried running over fenders with rocket bunny flares riveted to them? Or anyone have any input as to if it would or why it wouldn't work?


Sent from my iPhone using Tapatalk

ehhhregartless
09-07-2015, 03:59 PM
What size wheels are you trying to fit?

https://farm1.staticflickr.com/268/19200024402_c900cf558c_b.jpg

caglej
09-07-2015, 04:29 PM
Matt Coffman runs RB flares on overfenders on his FD car.

StoopidLoose88
09-07-2015, 04:43 PM
What size wheels are you trying to fit?

https://farm1.staticflickr.com/268/19200024402_c900cf558c_b.jpg


Preferably 18x14s with ridiculous offset in the rear and I'll have to see what I can do in the front. I just want to do something different and absurd which is tough to do with a car as common as a 240 lol

Matt Coffman runs RB flares on overfenders on his FD car.


And thanks for the input, I'll look his car up!


Sent from my iPhone using Tapatalk

StoopidLoose88
09-07-2015, 04:48 PM
Matt Coffman runs RB flares on overfenders on his FD car.


Just checked it out, that's pretty close to what I'm talking about, I want to use 50mm rears and 30mm fronts with V2 RB flares on them to make the car sit as wide as possible


Sent from my iPhone using Tapatalk

2muchboost
09-13-2015, 12:31 AM
So I know it's generic and the final cost has many factors.....but what do people pay for installing overs and painting to match?

Judeasaurus
09-13-2015, 12:44 AM
How do you guys hold them up without using rivets, tryyna keep the 240sx clean lookin

huffandpuff00
09-13-2015, 11:58 PM
http://1.bp.blogspot.com/-IzefnS-FIOg/UaxeFS0p3AI/AAAAAAAACLU/XMU1PvhUlcc/s1600/photo%2B3-772491.JPG
http://1.bp.blogspot.com/-eNBCgb3_FBc/VfZezOvDuzI/AAAAAAAACk8/yb0U-_P3T00/s1600/image2.JPG
http://1.bp.blogspot.com/-rzvSCDE4bS4/VfZhiTZXWRI/AAAAAAAAClo/urfzMygVgR4/s1600/IMG_2446-784455.JPG

OBEEWON
09-14-2015, 07:19 AM
Panel bond?
How strong is that stuff?

crzsteveo
09-14-2015, 08:24 PM
^curious as well....from my understanding its pretty strong. once cured it would be hard to pull on the rear over if applied to that. but I don't know the long term effect it would have being in the elements everyday.



does anyone have recommendations on bolts/ flush securing fasteners for rear overs?

I do not want to have 50 rivets showing on my 30mm rear overs. only other way for me to attach them would be to bondo/blend in the edges. I was looking for a way to secure it in all the corners and maybe have some in between and have the heads of the bolts painted to "blend" in.

caglej
09-22-2015, 10:43 PM
really interested in seeing a coupe, painted, with type 2 rears and an aggresive kit/fitment. have yet to see anybody do it.

ehhhregartless
10-17-2015, 01:22 AM
http://www.farmofminds.com/wp-content/uploads/2015/07/1200x801xStancenation-51.jpg.pagespeed.ic.Su9J7Na5R7.jpg

red240
10-21-2015, 05:55 PM
DMax hood and 40mm front fenders, Origin 50mm rears molded on, Not crazy about the Origin overs, just didn't fit well and took a ton of work to get them decent, I filled the side vent on the front fenders, didn't like them :)
http://i72.photobucket.com/albums/i171/wide240sx/2015-09-18%2014.28.13_zpspqovbfis.jpg (http://s72.photobucket.com/user/wide240sx/media/2015-09-18%2014.28.13_zpspqovbfis.jpg.html)

ehhhregartless
10-25-2015, 07:54 AM
https://farm8.staticflickr.com/7592/17076038161_b7a86b6443_b.jpg

Nicelyphe
11-01-2015, 06:14 PM
I am looking into going with some Origin Type 2 50mm overs for an S14..Stuck on this decision. Is there an issue with Origin quality as people are saying? They will be replacing some current over fenders the PO put on the vehicle. Currently they are applied with standard rivets but I plan to give the panel bond a go with the new set.

ehhhregartless
12-20-2015, 08:35 AM
https://scontent-iad3-1.xx.fbcdn.net/hphotos-xaf1/t31.0-8/fr/cp0/e15/q65/11169588_378517245673344_102343866631317584_o.jpg? efg=eyJpIjoidCJ9
https://scontent-iad3-1.xx.fbcdn.net/hphotos-xpf1/t31.0-8/fr/cp0/e15/q65/11144980_378517192340016_2030496859149135249_o.jpg ?efg=eyJpIjoidCJ9

Rustys14
01-03-2016, 02:57 PM
Has anyone tried the Fineline Tuning S14 50mm overs (Chargespeed reps) that can comment on fitment? I need a full length/panel over to cover up a shitty repair job that's on the shell I just bought and these and Chargespeed are the only overs I can find that fit the bill. The Fineline overs would end up being about $300 cheaper then Chargespeed after shipping so they have peaked my interest but I am concerned about fitment since I can't find any reviews.

Here is a link to the Fineline overs I'm talking about:
http://finelinetuning.bigcartel.com/product/s14-50mm-rear-overfenders

zwzweston
01-04-2016, 09:34 AM
Has anyone tried the Fineline Tuning S14 50mm overs (Chargespeed reps) that can comment on fitment? I need a full length/panel over to cover up a shitty repair job that's on the shell I just bought and these and Chargespeed are the only overs I can find that fit the bill. The Fineline overs would end up being about $300 cheaper then Chargespeed after shipping so they have peaked my interest but I am concerned about fitment since I can't find any reviews.

Here is a link to the Fineline overs I'm talking about:
http://finelinetuning.bigcartel.com/product/s14-50mm-rear-overfenders
I have a pair, they're not permanently fitted but with just a mock up they look pretty good.

tuzzio
01-11-2016, 09:58 AM
anybody have any knowledge on any s14 over fenders that go into the trunk? Long story short, buddy smashed up his rear and wants a set that goes into the trunk. He is open to cheap options as he plans to re-chassis in the future.

blueshark123
01-11-2016, 11:15 AM
Into the trunk? All I know is that Chargespeed is the best overs as far as fitment and coverage area.

collegekid
01-15-2016, 09:51 AM
http://i18.photobucket.com/albums/b133/nick3889/337269_51_full.jpg

I really want to see more people running custom metal overfenders. I can see that easily costing $1000+

Then again, I don't have the need for anything other than a roll and pull for my 18 x 9 +20.

Then again, why the hell is everyone trusting fiberglass so much? It doesnt seem like it would perform well in extreme heat or cold.

tuzzio
01-15-2016, 10:24 AM
Then again, why the hell is everyone trusting fiberglass so much? It doesnt seem like it would perform well in extreme heat or cold.

because s chassis owners don't have money.

crzsteveo
01-16-2016, 06:57 AM
Metal overs??? That defeats the purpose though... Why go wider and have an over that weighs a lot more than fiberglass and be a lot more work to do to get it to fit/flow right. I like seeing metal flares like the 180 posted above

turboshoebox
01-16-2016, 12:38 PM
http://i18.photobucket.com/albums/b133/nick3889/337269_51_full.jpg

I really want to see more people running custom metal overfenders. I can see that easily costing $1000+

Then again, I don't have the need for anything other than a roll and pull for my 18 x 9 +20.

Then again, why the hell is everyone trusting fiberglass so much? It doesnt seem like it would perform well in extreme heat or cold.

those are fiber glass son...not metal. still custom but not metal

yomisiu
01-16-2016, 02:33 PM
wrong. those are indeed metal quarters.

turboshoebox
01-16-2016, 03:49 PM
wrong. those are indeed metal quarters.

You people are funny thinking you have all the facts straight when infact you don't.

I know the original owner. It was owned by a guy named sei (Korean guy) where he used to work at jada toys in city of industry and after dub magazine toys if i remember right.

It started as a vertex replica fiberglss kit and was custom installed by AutoXplosion in the city of Gardena.

s14slowmofo
01-17-2016, 05:48 PM
You people are funny thinking you have all the facts straight when infact you don't.

I know the original owner. It was owned by a guy named sei (Korean guy) where he used to work at jada toys in city of industry and after dub magazine toys if i remember right.

It started as a vertex replica fiberglss kit and was custom installed by AutoXplosion in the city of Gardena.

not for nothing i think they did a pretty good job

s14slowmofo
01-17-2016, 05:51 PM
Metal overs??? That defeats the purpose though... Why go wider and have an over that weighs a lot more than fiberglass and be a lot more work to do to get it to fit/flow right. I like seeing metal flares like the 180 posted above

i can agree with you but i cant (weight wise it makes sense)
(safety wise metal vs fiberglass metal wins)
also remmber if your making more than enough power you wont be worried about wieght
i guess its mainly prefrence

yomisiu
01-17-2016, 06:24 PM
You people are funny thinking you have all the facts straight when infact you don't.

I know the original owner. It was owned by a guy named sei (Korean guy) where he used to work at jada toys in city of industry and after dub magazine toys if i remember right.

It started as a vertex replica fiberglss kit and was custom installed by AutoXplosion in the city of Gardena.


i remember reading years ago it was metal. seems like no one really know for sure. even people that knew the owner.
gabe,
that was Sei's old car,
he use to work for Jadatoy.
it's been awhile, but I remember he told me
it's all custom metal wide body.
he's on zilvia, just no more s chasis for him
so he doesn't log on anymore.
you're right. i did some research and it's custom metal... weird. could have sworn it was bn blister
Its not all metal, all fiberglass saw it many times before my buddy sold it.

¯\_(ツ)_/¯

collegekid
01-17-2016, 06:43 PM
LOL at him calling me "son"

It was said to be metal so I assumed it to be true, since no one knows what it is, whatever ESSE.

http://zilvia.net/f/showthread.php?t=621844

This guy did a metal over fender. He says it costed him $2000. I think its a bit much and not too appealing for me because of the drag racing style (which I don't like on imports) and unfinished paint. I really think some nice Hot road Aero and some 17/18 stagger or 18's all around would set it off. If the owner of the car doesnt want it here Ill remove it.


http://i64.tinypic.com/2hy9zs2.png


http://i68.tinypic.com/atq8v7.png
http://i68.tinypic.com/20a9mdx.png

KAT-PWR
01-17-2016, 07:09 PM
Saw that a while back. Props on the craftsmanship but it looks like a fucking flying saucer.

s14slowmofo
01-17-2016, 09:15 PM
LOL at him calling me "son"

It was said to be metal so I assumed it to be true, since no one knows what it is, whatever ESSE.

http://zilvia.net/f/showthread.php?t=621844

This guy did a metal over fender. He says it costed him $2000. I think its a bit much and not too appealing for me because of the drag racing style (which I don't like on imports) and unfinished paint. I really think some nice Hot road Aero and some 17/18 stagger or 18's all around would set it off. If the owner of the car doesnt want it here Ill remove it.


http://i64.tinypic.com/2hy9zs2.png


http://i68.tinypic.com/atq8v7.png
http://i68.tinypic.com/20a9mdx.png

last one the body lines on the sides remind me of a 69 charger

IIIXziuR
01-18-2016, 12:07 PM
When keeping it real goes wrong.

DriftingBrandon
01-26-2016, 09:04 AM
Hopefully I won't get flamed for asking this but has anyone ever tried running over fenders with rocket bunny flares riveted to them? Or anyone have any input as to if it would or why it wouldn't work?


Sent from my iPhone using Tapatalk

Instagram: @kushakev

StoopidLoose88
01-26-2016, 09:40 PM
Instagram: @kushakev


http://uploads.tapatalk-cdn.com/20160127/6d8c7169bdaedc19583de3f1895d7cd3.jpg

Nothing shows up?


Sent from my iPhone using Tapatalk

DriftingBrandon
01-26-2016, 10:16 PM
MushaKev****************************************** **************
He's local in florida too. He was at the FD Orlando event last year. He's got some like 10" dish vskf lol

turboshoebox
01-26-2016, 10:18 PM
i remember reading years ago it was metal. seems like no one really know for sure. even people that knew the owner.




¯\_(ツ)_/¯

Will you stop arguing with me dude it's NOT metal. I even talked to the body shop who did this custom work cause i was asking about the custom work cause i wanted to do something simular except with s14 kouki or s15 front

tuzzio
01-27-2016, 07:06 AM
Will you stop arguing with me dude it's NOT metal. I even talked to the body shop who did this custom work cause i was asking about the custom work cause i wanted to do something simular except with s14 kouki or s15 front

dude wants to stop arguing, by continuing to argue.

welcome to zilvia.

KAT-PWR
01-27-2016, 10:32 AM
dude wants to stop arguing, by continuing to argue.

welcome to zilvia.

It's turbo shoe box the 35 year old retard, what do you expect?

tuzzio
01-27-2016, 12:11 PM
It's turbo shoe box the 35 year old retard, what do you expect?

http://mattpham.com.au/wp-content/uploads/2013/06/biggie_2.jpg

turboshoebox
01-27-2016, 10:40 PM
dude wants to stop arguing, by continuing to argue.

welcome to zilvia.

I'm not arguing I'm giving the facts.

Tearlessj
01-31-2016, 10:06 PM
Anyone have any reviews on the fineline tuning fenders?

Kuma
01-31-2016, 11:27 PM
I'm not arguing I'm giving the facts.

Quit arguing with everyone. Give it a rest.

zwzweston
02-10-2016, 05:27 PM
Anyone have any reviews on the fineline tuning fenders?
http://uploads.tapatalk-cdn.com/20160211/a9037861e79e9d2ec37dce36d1c10dad.jpg
http://uploads.tapatalk-cdn.com/20160211/2cda114355d6d2c7f033a47edd063ba3.jpg
http://uploads.tapatalk-cdn.com/20160211/9878de0c3def628cfbb784598f717795.jpg
http://uploads.tapatalk-cdn.com/20160211/fae00c40171a9587045fc51d01b6cf06.jpg
http://uploads.tapatalk-cdn.com/20160211/db5dec655f9bc7109233d5e87ee4ee4f.jpg
These are the fineline 50mm rear fenders. I am very satisfied with the fit, they needed no work to go right on the car. They have 8-9 rivets per side if I recall correctly. The gas door area needs a little dremel work, and the inner fender has a huge lip (like 1") that you would probably cut for stance/Wheel to fender fitment. Other than that, no complaints.

Sent from my SM-N920V using Tapatalk

ehhhregartless
02-12-2016, 07:51 PM
GP Sports

https://ra64freddy.files.wordpress.com/2012/11/stare-down.jpg?w=1200

ehhhregartless
03-06-2016, 07:43 AM
More GP Sports

http://ra64freddy.files.wordpress.com/2011/02/s13_in_pits_with_tsukuba_sign-13013.jpg

sdaigle240
03-08-2016, 12:07 PM
Who else makes s14 fenders that cover every inch of the panel besides fine line tuning? they are sold out. i know ive seen them before where they even curl into the crease between the fender and trunk. the pannels that only partially cover the stock sheet metal will not work for my application.
thanks - daigle

zwzweston
03-08-2016, 12:08 PM
Who else makes s14 fenders that cover every inch of the panel besides fine line tuning? they are sold out. i know ive seen them before where they even curl into the crease between the fender and trunk. the pannels that only partially cover the stock sheet metal will not work for my application.
thanks - daigle
Chargespeed. I think the forcewerkz ones do as well, but I haven't seen them in person.

Sent from my SM-N920V using Tapatalk

ehhhregartless
03-13-2016, 07:56 AM
http://ra64freddy.files.wordpress.com/2010/03/wide-nissan-s131.jpg
http://ra64freddy.files.wordpress.com/2010/03/wide-nissan-silvia1.jpg

ehhhregartless
03-13-2016, 07:58 AM
Techno Pro Spirit

http://ra64freddy.files.wordpress.com/2010/03/q-taro1-techno-pro-spirit.jpg

ehhhregartless
03-19-2016, 10:07 AM
http://www.motormavens.com/emAlbum/albums/Contributors/Mike%20Kim/Events/Formula%20D/2013%20Tech%20Day%20Source%20Interlink/_fullsize/IMG_9299-formula-d-tech-day-2013-source-interlink-forrest-wang-2jz-240sx-s14-getnutslabs-copy.jpg

ehhhregartless
03-19-2016, 09:04 PM
http://image.superstreetonline.com/f/98822283+w1200+h+re0/fresh-tokyo-car-meet-white-car-front-three-quarter-in-parking-garage.jpg

iLagX
03-19-2016, 11:19 PM
someone should start making wider doors with modern door handles

ehhhregartless
04-02-2016, 12:43 PM
https://scontent-iad3-1.xx.fbcdn.net/hphotos-xaf1/t31.0-8/fr/cp0/e15/q65/11064615_10153339124741840_8605132181402138844_o.j pg?efg=eyJpIjoidCJ9

ehhhregartless
05-03-2016, 07:27 PM
http://67.media.tumblr.com/d85896ecc2b259caea077979f94b5280/tumblr_my7v0yH2in1r5qj0so1_1280.jpg

ehhhregartless
05-21-2016, 03:24 AM
https://scontent-lga3-1.xx.fbcdn.net/t31.0-8/fr/cp0/e15/q65/12032614_818906108208746_8001206700022087362_o.jpg ?efg=eyJpIjoidCJ9

joshg51
05-22-2016, 07:46 PM
Central Auto/Boss
50cm
https://farm8.staticflickr.com/7537/27147186306_c113be7e10_b.jpg[/url]

Example pics
http://www.central-e.com/gazo/car_aero_s13_s15_180sx_w_fender.jpg
http://i675.photobucket.com/albums/vv117/MindySox/oam2008_042b-1.jpg
https://farm8.staticflickr.com/7627/27111857761_0f24a265f0_b.jpg
https://farm8.staticflickr.com/7397/27085046232_0b144cc42c_z.jpg

turboshoebox
05-22-2016, 10:42 PM
I'm not sure if like the rear vent or not hmmmm

DriftingBrandon
05-23-2016, 09:14 AM
................

jaysgottaredtop
05-23-2016, 09:46 AM
Cooling the outer 1" of tread block. Super functional.

joshg51
05-24-2016, 12:20 AM
Found a good name for them tho. Yamborghini Overs. Just need to get some wheels to fill them up and power to make those wheels spin first.
HfnS8FMkIMA

crzsteveo
05-24-2016, 07:42 AM
I used 1/4 rivnuts underneath. I switched to a more flush bolt. Hard to see

http://uploads.tapatalk-cdn.com/20160524/e4d3dde648989781717616b2eaa90576.jpg


Sent from my iPhone using Tapatalk

ehhhregartless
06-04-2016, 08:51 AM
https://scontent-iad3-1.xx.fbcdn.net/t31.0-8/fr/cp0/e15/q65/1401983_883905661628212_7225454368343759929_o.jpg? efg=eyJpIjoidCJ9

ehhhregartless
06-04-2016, 09:37 AM
https://scontent-iad3-1.xx.fbcdn.net/v/t1.0-9/fr/cp0/e15/q65/1453215_695527443799369_784672900_n.jpg?efg=eyJpIj oidCJ9&oh=96182d85b824ed5eb75052f5a75ca07e&oe=57CC0079

ehhhregartless
06-04-2016, 08:28 PM
https://c1.staticflickr.com/9/8350/8219031286_43ed3850b0_b.jpg

ehhhregartless
06-04-2016, 09:12 PM
https://scontent-iad3-1.xx.fbcdn.net/t31.0-8/fr/cp0/e15/q65/12087924_634607186681814_5633885485006062574_o.jpg ?efg=eyJpIjoidCJ9

STEEZxIT
06-07-2016, 02:32 PM
anyone running gp sports rear overfenders on their s14? they appear similar to origin lab type 2 50mm's.

looking at dmax too. those won't be in stock until sometime in july however.

2muchboost
07-28-2016, 01:05 PM
Alright ladies and gents....finally got some Chargespeed Overs to install on the rear of my 97 Kouki. I will apologize for the lack of knowledge relating to bodywork and such but I have been searching around for the best option for Rivnuts to install these onto my Aspen White Kouki.

I am heading to local Fastenal stores around my area tomorrow to pick up some Rivnuts and was wondering if you had any advice as to what Rivnuts to use for the install. I was thinking of going with either an M5 or M6 with SS button head bolts. Again open to suggestions as I have no experience with anything body related really. In the future I will have them installed by a shop and shaved to look OEM but want to cover up the cut fenders I have now.

Thanks and cheers!

1Day
07-29-2016, 04:52 PM
Alright ladies and gents....finally got some Chargespeed Overs to install on the rear of my 97 Kouki. I will apologize for the lack of knowledge relating to bodywork and such but I have been searching around for the best option for Rivnuts to install these onto my Aspen White Kouki.

I am heading to local Fastenal stores around my area tomorrow to pick up some Rivnuts and was wondering if you had any advice as to what Rivnuts to use for the install. I was thinking of going with either an M5 or M6 with SS button head bolts. Again open to suggestions as I have no experience with anything body related really. In the future I will have them installed by a shop and shaved to look OEM but want to cover up the cut fenders I have now.

Thanks and cheers!

Check my post from page 2, it has the part number from Fastenal as well and I used SS button head bolts too.

2muchboost
07-30-2016, 08:21 AM
Just checked it out.....thanks for the info bud! Cheers

ehhhregartless
08-06-2016, 08:50 AM
https://scontent-iad3-1.xx.fbcdn.net/v/t1.0-9/fr/cp0/e15/q65/74991_1188852241129656_2295357449241066578_n.jpg?e fg=eyJpIjoidCJ9&oh=a8992877f5a80287f762892dc9c7cb9f&oe=5815ADC4

ehhhregartless
08-06-2016, 12:37 PM
https://scontent-lga3-1.xx.fbcdn.net/v/t1.0-9/fr/cp0/e15/q65/1185676_702863083061910_202662954_n.jpg?efg=eyJpIj oidCJ9&oh=d8bd8ac9dd4200b2f652409bdcb8ee88&oe=5854EE52

ehhhregartless
08-06-2016, 08:14 PM
https://scontent-iad3-1.xx.fbcdn.net/v/t1.0-9/fr/cp0/e15/q65/1001236_687944841220401_1881292995_n.jpg?efg=eyJpI joidCJ9&oh=a64d8226b1c13a458dd2ebead76a1653&oe=585AD183

ehhhregartless
08-17-2016, 08:48 PM
https://scontent-lga3-1.xx.fbcdn.net/v/t1.0-9/fr/cp0/e15/q65/546840_536746776340209_696928604_n.png.jpg?efg=eyJ pIjoidCJ9&oh=2e6b015322dfffa2ac0968963a087781&oe=585DD04E

2muchboost
08-19-2016, 11:15 AM
Overfenders going on this weekend. Thanks to 1Day for the information. Just wanted to share the part #s and info for the parts I ordered through Fastenal. Total for the order was about $31 with shipping and special order pricing. Used lock washers to help relieve some of the pressure the configuration might put on the FRP material.

http://i.imgur.com/IgLFKK0l.jpg
http://i.imgur.com/r1d8m6Ql.jpg
http://i.imgur.com/SuGI8cDl.jpg

undant
08-19-2016, 08:51 PM
If you really did google and looked at the lines and styles of the overs, you'd have each down within 30 min. but i'll play along. http://goo.gl/bL6MG5

ehhhregartless
08-21-2016, 09:11 AM
https://scontent-iad3-1.xx.fbcdn.net/t31.0-8/fr/cp0/e15/q65/479002_472272019454352_203104529_o.jpg?efg=eyJpIjo idCJ9

ehhhregartless
08-27-2016, 08:46 AM
https://scontent-lga3-1.xx.fbcdn.net/t31.0-8/fr/cp0/e15/q65/12513646_912414432191246_5483734094370174711_o.jpg ?efg=eyJpIjoidCJ9

ehhhregartless
09-18-2016, 01:03 PM
https://scontent-iad3-1.xx.fbcdn.net/v/t1.0-9/fr/cp0/e15/q65/396177_338069346292427_2054012907_n.jpg?efg=eyJpIj oidCJ9&oh=de0f8d258aef652d3fa3306942268366&oe=583C8F2F

ehhhregartless
09-18-2016, 02:23 PM
https://scontent-iad3-1.xx.fbcdn.net/v/t1.0-9/fr/cp0/e15/q65/10610848_760229294015107_1979325887616364798_n.jpg ?efg=eyJpIjoidCJ9&oh=b37e5da624e84412e695f6bfa09d645a&oe=5877DE4B

collegekid
12-05-2016, 08:39 PM
So I've got a question for anyone who has widebody rear fenders installed for a decent amount of time. Has anyone run into issues with paint lifting around the edges or parts of the fiberglass start to crack?

Just from the fact that steel, fiberglass, and body filler have different rates of expansion due to being different materials, one would assume that somewhere shit is going to show wear and tear after some time.

My friends dad is heavy into corvettes and he always bitches about the paint cracking.

Jorgs_7
12-06-2016, 10:47 AM
So I've got a question for anyone who has widebody rear fenders installed for a decent amount of time. Has anyone run into issues with paint lifting around the edges or parts of the fiberglass start to crack?

Just from the fact that steel, fiberglass, and body filler have different rates of expansion due to being different materials, one would assume that somewhere shit is going to show wear and tear after some time.

My friends dad is heavy into corvettes and he always bitches about the paint cracking.

This is why you don't mold overs into the body.

Sounds great, but just like every other molded body kit I've seen (Minnesota), they delaminate, crack and look like dick.

austin2112
12-06-2016, 02:50 PM
I recently ordered a f+r set of the new 75mm origin labo overs. Ive yet to see a car with them finished, if anyone has pls post i'm very curious.

https://scontent-lga3-1.xx.fbcdn.net/v/t1.0-9/15078520_1549405415101456_5341024821783670068_n.jp g?oh=ea0a2c067ceef87e88dc648af5fafd5a&oe=58B7C7EC

https://scontent-lga3-1.xx.fbcdn.net/v/t1.0-9/15192708_1549405408434790_1158382870916314274_n.jp g?oh=2466e4d415c37893b484dbc545908318&oe=58BFFE34

boost
12-07-2016, 03:28 PM
yeah i'm wondering how these are going to look. in the early pics they have so much flat top area, the extensions also..

http://farm1.staticflickr.com/738/31455905266_8b08290b26_b.jpg
http://farm1.staticflickr.com/632/31493333035_c2c4ae9ca5_b.jpg

onehundredoctane
12-08-2016, 07:13 AM
I love how almost all decent/informative based threads on this forum just turn into fucking picture books.

"Hey lets start a comprehensive thread of all the widebody kits, how they fit, and what width they are!"

Internet: "Here's a bunch of random pics I found with no info"

austin2112
12-08-2016, 08:12 AM
Yeah i'm super curious aswell. Some pics I seen had extensions and some didnt. I wont know until january I guess

boost
12-08-2016, 10:19 AM
I love how almost all decent/informative based threads on this forum just turn into fucking picture books.

"Hey lets start a comprehensive thread of all the widebody kits, how they fit, and what width they are!"

Internet: "Here's a bunch of random pics I found with no info"

Are you referring to the previous 75mm origin post and mine? what kind of info do you want? you have complaints but you're not providing any suggestions/solutions. i can tell you origin does not bolt up like oem. origin fenders don't come pre-drilled. you have to decide where the holes go and hence all alignment and fitment is up to the installer. on top of that it will need trimming.

onehundredoctane
12-08-2016, 10:43 AM
Are you referring to the previous 75mm origin post and mine? what kind of info do you want? you have complaints but you're not providing any suggestions/solutions. i can tell you origin does not bolt up like oem. origin fenders don't come pre-drilled. you have to decide where the holes go and hence all alignment and fitment is up to the installer. on top of that it will need trimming.


No, none of your posts, pretty much every post from ehhhregartless has NO info at all. Check post 152-176

ehhhregartless
12-11-2016, 11:59 AM
^ pretty much. Looking forward to all the great information I suppressed.

tuzzio
12-31-2016, 09:20 AM
I ran across a smaller company with a website a month or two ago that makes pretty much an entire s14 rear end out of fiberglass... over fenders, trunk, and maybe the rear bumper. Can't for the life of me remember how to find it. Any body know?

David616
12-31-2016, 09:22 PM
I ran across a smaller company with a website a month or two ago that makes pretty much an entire s14 rear end out of fiberglass... over fenders, trunk, and maybe the rear bumper. Can't for the life of me remember how to find it. Any body know?

Is this what you were referring to?

http://www.2fperformance.com/store#!/S14-complete-LFC-kit/p/61907008/category=1504169

tuzzio
01-01-2017, 09:42 AM
Is this what you were referring to?

http://www.2fperformance.com/store#!/S14-complete-LFC-kit/p/61907008/category=1504169

Yes sir. All of the thanks.

CHiNo4ReaL
01-02-2017, 08:51 AM
Abmax got this one:

http://abmax.eu/458-thickbox_default/s14a-rear-part.jpg

http://abmax.eu/s14/132-s14a-rear-part.html

Nismo Negro
01-05-2017, 10:34 AM
Origin Lab's Version 4 75mm overs


http://img.photobucket.com/albums/v676/platinumcelica/Random%20Pics/Screen%20Shot%202017-01-06%20at%202.16.40%20AM_zpsdz56xcud.png

http://img.photobucket.com/albums/v676/platinumcelica/Random%20Pics/Screen%20Shot%202017-01-06%20at%202.16.13%20AM_zpso84olwbw.png

http://img.photobucket.com/albums/v676/platinumcelica/Random%20Pics/Screen%20Shot%202017-01-06%20at%202.16.26%20AM_zpsqqp0zggo.png

http://img.photobucket.com/albums/v676/platinumcelica/Random%20Pics/Screen%20Shot%202017-01-06%20at%202.15.51%20AM_zpstuva0m32.png

http://img.photobucket.com/albums/v676/platinumcelica/Random%20Pics/Screen%20Shot%202017-01-06%20at%202.16.02%20AM_zpssebc6pao.png

240sx_sr20det
01-05-2017, 05:30 PM
Anyone running Origin 55mm Type 3's with 17's?

Thursday7
08-24-2017, 11:40 AM
Anywhere I can find 25-30mm rears for S13 hatch that aren't an arm and a leg? seems like origin and duraflex are all we have access to anymore. There's so many more options on yaj and upgarage.

kneeecoo
08-24-2017, 07:42 PM
Techno Pro Spirit

http://ra64freddy.files.wordpress.com/2010/03/q-taro1-techno-pro-spirit.jpg

What hood is that?

anthony_240
08-24-2017, 08:32 PM
Anywhere I can find 25-30mm rears for S13 hatch that aren't an arm and a leg? seems like origin and duraflex are all we have access to anymore. There's so many more options on yaj and upgarage.



Ait racing.. they have 30mm .
The quality is good man, I'm running those on my s14 , they fit perfect and not wavy garbage


Sent from my iPhone using Tapatalk

dreaMervaj
10-25-2017, 07:57 PM
I'm looking for chargespeed overs... are these made to order??? I don't see any for sale in the for sale section. Anyone got leads where I could purchase these?

SlmdCpe
10-25-2017, 08:03 PM
I'm looking for chargespeed overs... are these made to order??? I don't see any for sale in the for sale section. Anyone got leads where I could purchase these?

For what car? I ordered my set through Concept Z performance. Took about 3 weeks. Great service and amazing communication.

Highly recommend them.

https://scontent-sea1-1.cdninstagram.com/t51.2885-15/s640x640/sh0.08/e35/22709113_140237533275924_3903910420619984896_n.jpg ?ig_cache_key=MTYzMzA1MDYzMjU0NTI0ODY1Mg%3D%3D.2

crzsteveo
10-26-2017, 02:31 PM
I recently received some BN sports type 4 50mm rear overs. Finish is pretty good and overall fitment pretty right on. The one thing I loved about these is the fact how they run against the quarter glass and wrap around the rear tail lights. It makes it look like a brand new oem panel. They needed just slight trimming around the DS door edge and where the side skirts line up. Other than that they went right on the car.

https://uploads.tapatalk-cdn.com/20171026/4ba94922a1583acba75d000acf0e4b07.jpg
https://uploads.tapatalk-cdn.com/20171026/9a615feda0d70e1a7ae79e6986884b15.jpg
https://uploads.tapatalk-cdn.com/20171026/c596ee7ddbbbb90db635f1c45ceb3705.jpg
https://uploads.tapatalk-cdn.com/20171026/8fecd107c219c23af29c8e0fb0492516.jpg
https://uploads.tapatalk-cdn.com/20171026/6c2820164fe7322913da96b0bf22b4d3.jpg


Sent from my iPhone using Tapatalk

tuzzio
10-26-2017, 03:28 PM
Can't argue with those. I'm an OEM body guy, but if I had to pick overs it would be those for sure.

crzsteveo
10-26-2017, 05:52 PM
Can't argue with those. I'm an OEM body guy, but if I had to pick overs it would be those for sure.

When I ordered them I honestly had no clue what they would look like. Put in an order for 30mm, didn't know they didn't make 30s so I got these instead. Never liked the look of 50s but now I gotta rock them.

The beauty part of them is the fact they have tabs for in inner wheel well for mounting points if you wanted to use that.
Also the PS gas door is molded after the oem metal which is neat.

tuzzio
10-27-2017, 08:07 AM
When I ordered them I honestly had no clue what they would look like. Put in an order for 30mm, didn't know they didn't make 30s so I got these instead. Never liked the look of 50s but now I gotta rock them.

The beauty part of them is the fact they have tabs for in inner wheel well for mounting points if you wanted to use that.
Also the PS gas door is molded after the oem metal which is neat.

More pictures of the puppy.

crzsteveo
10-27-2017, 09:02 AM
As requested lol. IG is crzsteveo, that's where she's posted the most lol she's most excited when I paint another nissan lol


https://uploads.tapatalk-cdn.com/20171027/c132ecfdca9d73e2852015bf0f03afb3.jpg
https://uploads.tapatalk-cdn.com/20171027/484536217d071e81f56e7d76b83d617a.jpg


Sent from my iPhone using Tapatalk

Boorito
10-27-2017, 09:48 AM
Love that second picture. ^

RB25GUY
10-27-2017, 11:34 AM
^ 2nd that!

kneeecoo
10-27-2017, 11:36 AM
Thank you for the doggo

Sent from my SM-G955U using Tapatalk

dreaMervaj
10-27-2017, 05:10 PM
For what car? I ordered my set through Concept Z performance. Took about 3 weeks. Great service and amazing communication.

Highly recommend them.

https://scontent-sea1-1.cdninstagram.com/t51.2885-15/s640x640/sh0.08/e35/22709113_140237533275924_3903910420619984896_n.jpg ?ig_cache_key=MTYzMzA1MDYzMjU0NTI0ODY1Mg%3D%3D.2


What size tire and width/offset are you guys with +50mm running? I don't like stretch tires but flush. 18x11 +15?

Any info would be appreciated.

mct3351
10-31-2017, 11:54 AM
Does anyone know what rear overfenders these are? They appear to be trimmed. They don't have the step of an origin 2 and don't seem to have the pulled fender look molded in.

http://fatlace.com/lacedup/wp-content/uploads/2011/04/IMG_2032.jpg

http://fatlace.com/lacedup/wp-content/uploads/2011/04/wide_1.jpg

https://coolqidstable.files.wordpress.com/2013/03/marks14.jpg

dazed
10-31-2017, 05:33 PM
Does anyone know what rear overfenders these are? They appear to be trimmed. They don't have the step of an origin 2 and don't seem to have the pulled fender look molded in.

[IMG]http://fatlace.com/lacedup/wp-content/uploads/2011/04/IMG_2032.jpg[/IMG

[IMG]http://fatlace.com/lacedup/wp-content/uploads/2011/04/wide_1.jpg[/IMG

[IMG]https://coolqidstable.files.wordpress.com/2013/03/marks14.jpg[/IMG

Rocket Bunny 30mm's that were bowed out. Their quality has gone down over the years though. I bought some around 2011-2012 and they were money. They look ugly bowed-out like that though. I'd just go after some actual 50mm overfenders depending on the wheel specs. Chargespeed is still quality for example.

C. Anderson
11-01-2017, 06:27 AM
Does anyone know what rear overfenders these are? They appear to be trimmed. They don't have the step of an origin 2 and don't seem to have the pulled fender look molded in.


They look like DMax to me the way they go around the fender above the tail light. BN Sports also has a rear over fender that doesn't have the pulled fender look.