wiring specialties
02-20-2015, 02:00 PM
RB25DET PRO Series Harness: Only $599 for S13 and S14 240sx - ORDER HERE (http://www.wiringspecialties.com/rb25det.html) - Limited Quantities so order now!
http://site.wiringspecialties.com/images/rb25det_pro_harness.jpg
After much research and development, our highly anticipated RB25DET PRO Series wiring harness has arrived. This sleek new harness is 100% plug and play and comes with a startup guarantee! It was designed in house on an actual RB25DET engine and supports most ECU's, injector types and MAFS. Wiring your RB25 swap has never been easier!
PRO-SERIES HARNESS SPECS
• Plug and Play.
• No cores or additional wiring required.
• Point to Point continuity tested on every wire.
• Constructed using OEM connectors and seals.
• Made with high temp TXL wire (-40C to +125C operating temperature) with adhesive shrink tubing.
• Wrapped in lightweight nylon loom with -94C to +257C operating temperature.
• Includes a charge harness and improved grounds.
PRO-SERIES HARNESS INCLUDES
• Quick disconnect MAFS/AEM/Haltech/PFC Speed density extensions (change from MAFS TO AEM/Haltech in seconds).
• Coil harness sub-harness.
• Knock sensor sub-harness.
• Transmission harness with reverse and speed sensor wiring.
• Alternator charge cable.
• Nissan Diagnostics connector.
• OEM Power and dash interface connectors.
• Retains factory A/C,speedometer, tachometer, engine temperature gauge, oil pressure sensor, alternator charge light, reverse lights and wipers.
http://site.wiringspecialties.com/images/rb25det_pro_harness.jpg
After much research and development, our highly anticipated RB25DET PRO Series wiring harness has arrived. This sleek new harness is 100% plug and play and comes with a startup guarantee! It was designed in house on an actual RB25DET engine and supports most ECU's, injector types and MAFS. Wiring your RB25 swap has never been easier!
PRO-SERIES HARNESS SPECS
• Plug and Play.
• No cores or additional wiring required.
• Point to Point continuity tested on every wire.
• Constructed using OEM connectors and seals.
• Made with high temp TXL wire (-40C to +125C operating temperature) with adhesive shrink tubing.
• Wrapped in lightweight nylon loom with -94C to +257C operating temperature.
• Includes a charge harness and improved grounds.
PRO-SERIES HARNESS INCLUDES
• Quick disconnect MAFS/AEM/Haltech/PFC Speed density extensions (change from MAFS TO AEM/Haltech in seconds).
• Coil harness sub-harness.
• Knock sensor sub-harness.
• Transmission harness with reverse and speed sensor wiring.
• Alternator charge cable.
• Nissan Diagnostics connector.
• OEM Power and dash interface connectors.
• Retains factory A/C,speedometer, tachometer, engine temperature gauge, oil pressure sensor, alternator charge light, reverse lights and wipers.