View Full Version : Questions about Spacers..
Enemigo
07-21-2004, 08:58 PM
If i get some 17's for my s13 with a 40 offset, what size spacers should i get to get them semi or fully flushed with the fender? I have a stock Sivlia conversion (no widebody)... let me know so i can order.. thanks!
Jose
S13FREEAAK
07-21-2004, 09:32 PM
How wide are the wheels going to be?
Enemigo
07-21-2004, 09:40 PM
How wide are the wheels going to be?
17x7 w/40 offset.
Jose
Tubed4evr
07-21-2004, 09:49 PM
A 25mm or 30mm spacer will put you pretty close to flush with those wheels.
Ryan
Enemigo
07-21-2004, 09:50 PM
u running spacers?
Jose
240Stilo
07-21-2004, 09:58 PM
Any reason why you don't want to just get some wheels with a good offset off the bat? You can probably convert to 5 lug and buy some nice wheels for a some more money and it will be more piece of mind than running spacers.
Enemigo
07-21-2004, 09:59 PM
whats the best place to get some?
Jose
Enemigo
07-21-2004, 10:01 PM
Any reason why you don't want to just get some wheels with a good offset off the bat? You can probably convert to 5 lug and buy some nice wheels for a some more money and it will be more piece of mind than running spacers.
I'm getting a killer deal on these wheels and i don't have to be buying expensive wheels.
Jose
240Stilo
07-21-2004, 10:02 PM
H&R Spacers would be the a good choice. Just do a search for them.
AutoRnD
07-22-2004, 10:50 AM
i can get spacers for about 100-125 a pop ranging from 15 25 35mm
theronin
07-22-2004, 09:12 PM
www.wheelspacers.com
does custom work, very very good
ive heard about some bad experiences with H&R just fyi
wheelspacers.com is the place to go. $65/spacer is reasonable considering the uber-high quality.
Also, just HOW FLUSH do you want it?
If these were going to be used exclusively w/ these wheels, I'd get 40mm spacers. Otherwise (i.e. will be used with other wheels in the future) get either 30 or 35mm.
I run 7" wide front with -1 offset without a problem, so you should have no problems running 7" rear with 0 offset.
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.