Ka24de removed emissions help

[Braszil]

Ok so this is my first 240sx and I just replaced the motor,
1st start the car was running fine but it had all the emissions and vaccum lines all hooked up. Anyways had a coolant leak at the steel line under the manifold,so I replaced the intake manifold and deleted pretty much everything

All I have hooked up is the line from the brake booster, the one to the fpr and one from the iac to the intake. Capped the one under the throttle body..

I say it's running rich because car reeks of fuel and I have fuel on top of my pistons. On cold starts I also have to tap the gas and she fires right up weird ..

I decided to just remove it because it was easier and a friends car deleted his and his car runs fine

I just want to know if I forgot anything else or what can I do, I can't put the egr back on because I broke the pipe to the exhaust.

Searched on forums for days and cannot really find anything specific in my situation...

[PedroJG]

did you block off where the egr met the exhaust? If not then you'll have a huge exhaust leak.

[Braszil]

Thanks for the reply , yes I did and the car is a 1993 nissan 240sx , the car idles perfectly at 750.. when I come to stop tho it stays at 2k and drops slowly if that means anything?

[Braszil]

sorry for double post but I figure it out, if anyone has the same issue it was just the one of the fuel injectors not being all the way in the bushing