Thaiair
04-07-2014, 03:44 PM
Peakboost SR20 manifold setup. SOLD
Had this on a redtop in an s14 chassis and fitment was great, but no room for a/c lines near firewall. Clears P/S perfectly. Most of this was heat wrapped, which I took off.
Includes:
- T3 manifold (great welds, no cracks) w/ 38mm WG flange
- 3" 4 bolt upper downpipe w/ o2 bung (welded the egt bung shut and has some slag on the side from it)
- 3" v-band upper downpipe w/ o2 and egt bung
- v-band lower downpipe w/ cat delete and wideband bung (connects to the upper downpipe via v-band and deletes the cat to connect directly to catback exhaust)
- wastegate dumptube w/ flexible pipe
- 2 x v-band clamps and 1 gasket
http://i104.photobucket.com/albums/m188/thaiair/SR%20top%20mount/DSC_0153_zps7cca1db3.jpg
http://i104.photobucket.com/albums/m188/thaiair/SR%20top%20mount/DSC_0155_zps4fcee24c.jpg
http://i104.photobucket.com/albums/m188/thaiair/SR%20top%20mount/DSC_0154_zpseef87a4a.jpg
http://i104.photobucket.com/albums/m188/thaiair/SR%20top%20mount/DSC_0158_zpsd681466f.jpg
http://i104.photobucket.com/albums/m188/thaiair/SR%20top%20mount/DSC_0157_zps301cc3ea.jpg
Tial 38mm wastegate w/ 10lb spring. Has a bit of scratches, but works great. - SOLD
GT3071 .63AR T3 turbo - SOLD
- Less than 50 miles on it. Barely had time to drive on it so didn't push it at all.
- No play and spins freely
- Hose barb tapped on compressor housing for boost controller
- Includes .035" restrictor, gaskets, and -10 oil drain flange(lost gasket for this)
Had this on a redtop in an s14 chassis and fitment was great, but no room for a/c lines near firewall. Clears P/S perfectly. Most of this was heat wrapped, which I took off.
Includes:
- T3 manifold (great welds, no cracks) w/ 38mm WG flange
- 3" 4 bolt upper downpipe w/ o2 bung (welded the egt bung shut and has some slag on the side from it)
- 3" v-band upper downpipe w/ o2 and egt bung
- v-band lower downpipe w/ cat delete and wideband bung (connects to the upper downpipe via v-band and deletes the cat to connect directly to catback exhaust)
- wastegate dumptube w/ flexible pipe
- 2 x v-band clamps and 1 gasket
http://i104.photobucket.com/albums/m188/thaiair/SR%20top%20mount/DSC_0153_zps7cca1db3.jpg
http://i104.photobucket.com/albums/m188/thaiair/SR%20top%20mount/DSC_0155_zps4fcee24c.jpg
http://i104.photobucket.com/albums/m188/thaiair/SR%20top%20mount/DSC_0154_zpseef87a4a.jpg
http://i104.photobucket.com/albums/m188/thaiair/SR%20top%20mount/DSC_0158_zpsd681466f.jpg
http://i104.photobucket.com/albums/m188/thaiair/SR%20top%20mount/DSC_0157_zps301cc3ea.jpg
Tial 38mm wastegate w/ 10lb spring. Has a bit of scratches, but works great. - SOLD
GT3071 .63AR T3 turbo - SOLD
- Less than 50 miles on it. Barely had time to drive on it so didn't push it at all.
- No play and spins freely
- Hose barb tapped on compressor housing for boost controller
- Includes .035" restrictor, gaskets, and -10 oil drain flange(lost gasket for this)