Parting out 4 S13's and 1 S14 KA & SR Parts!

[DJPimpFlex]

http://imagizer.imageshack.us/v2/xq90/842/7pr1.jpg (https://imageshack.com/i/ne7pr1j)
http://imagizer.imageshack.us/v2/xq90/837/wrfc.jpg (https://imageshack.com/i/n9wrfcj)
http://imagizer.imageshack.us/v2/xq90/19/uftb.jpg (https://imageshack.com/i/0juftbj)
http://imagizer.imageshack.us/v2/xq90/542/8m3t.jpg (https://imageshack.com/i/f28m3tj)
http://imagizer.imageshack.us/v2/xq90/543/fvje.jpg (https://imageshack.com/i/f3fvjej)


Updated the list 2-13-14

(415) 724-0675


Cars
S13.4 240sx truck rolling shell. The truck comes with a bunch of fab work already complete as well as bodywork. I can deliver the shell if needed for extra.

90 240sx hatch
89 s10 rear cab section completely Rhinolined
97 Kouki Fiberglass Conversion front end w multi vent hood
Fiberglass doors
Fiberglass 30mm overs
Mustang Gt rear spoiler
Formula Drift spec roll cage
Rear bash/jacking bar and front lower bumper protector bar.
Quick disconnect Tube Front
Full Aggressive Body kit
Formula D approved fire suppression system
Battery Box

The car will come with stock suspension and wheels. No motor or transmission.

$3500 OBO (accepting trade offers, NOT PARTING OUT!!)

http://imagizer.imageshack.us/v2/640x480q90/197/j1cm.jpg (https://imageshack.com/i/5hj1cmj)
http://imagizer.imageshack.us/v2/640x480q90/24/u7nq.jpg (https://imageshack.com/i/0ou7nqj)
http://imagizer.imageshack.us/v2/800x800q90/707/r8ip.jpg (https://imageshack.com/i/jnr8ipj)


Wheels
BRAND NEW Rota Torque 18x9 +20 all around with NEW Federal 595 tires - $800
(2) Falken RT-615k 225/45/17 (70% tread) - $150 for the pair.
4 S13 SE Alloys, tires hold air - $100

Engine
SR Red Top Thermostat Housing - $25
KA24DE Starter - $40
KA24DE PS pump - $40
KA24DE Coil - $20
KA24DE IACV - $65
KA24DE AC Compressor - $40
Apexi Universal Filter - $20
Complete DOHC Power Steering Lines - $120

Drivetrain
Kazama Motor mounts - $145
Megan Racing Subframe Spacers - $30
S14 Rear Subframe - $85
S13 Rear Subframe - $85
S13 Axles - $70


Suspension
S14 Megan RUCA's - $90
4 Lug rear Hubs - $35 per pair
S13 Stock rear knuckles with Energy Suspension bushings already pressed in - $75
I have all S13 stock suspension so let me know what you need


Brakes
Z32 Rear Brake Calipers, brembo rotors, carbotech brake pads and conversion brake lines (they have been rebuilt and powdercoated black, everything you need!) - $290
Stock S13 Brake calipers - $25 each
Stock S13 4 Lug Rotors - $10 each


Interior
S13 Cluster Surround - $35
S13 Steering Wheel Adapter (nardi pattern) - $45
S13 5 Speed brake pedal - $40
S13 Black Manual Door Panels - $35
S13 Rear View Mirror - $15
S13 Center Console - $30
S13 Sun Visors - $25
S13 Gray Carpet - $75
S13 Complete Interior Wiring Harness - $130


S14 Ebrake Handle - $30
S14 Razo Shift Boot (Black with red stitching) - $30
S14 Zenki Black Face Gauge Cluster - $75
S14 Glove Box - $40
S14 Confetti rear seats - $80

GForce Blue 4pt Cam Lock Harness - $65

Exterior
S13 Hatch Rear Bumper (Have 2, 1 primer, one red) $35 each
S13 Popup Roof - $40
S13 Hatchback Fiberglass Rear Aero Bumper - $90
S13 Wingless Hatch - $70
S13 Driver Side Chuki Fender Extension - $30

S14 Zenki Passenger Fender - $75
S14 Passenger door - $75
S14 Sunroof Setup - $140 (I will part out the glass alone)



Misc
S13 Headlight trim pieces - $50
S13 Hood latch with cable - $25
S13 Upper Radiator mounting brackets - $15
S13 Windshield wiper motor - $10
S13 Gas Tank Door - $15

S14 Radiator Overflow Reservoir - $35

I have EVERYTHING so if you don't see it post/pm me. All stock parts are available. Shipping is also available on most parts.

(415) 724-0675

[blackrms13]

s13 driverside window motor?

[DJ-of-E]

That os giken is gonna get sold real quick here haha. I was expecting $1000.

[TheRealSy90]

Deposit sent for OS-Giken.


Sent from my iPhone using Tapatalk

[Linux2501]

what kind of cluster? digital or analog?

[DJPimpFlex]

Analog cluster

[Contract_Killer]

you got a straight front core support your willing to ship to 71112. will pay accordingly

[DJPimpFlex]

Yup. Shipping is expensive. Pm sent

[bfarroyo]

What's the condition of rear seats for s13? And the spacers are 10mm I assume?

Sent from my SPH-L720 using Tapatalk

[DJPimpFlex]

What's the condition of rear seats for s13? And the spacers are 10mm I assume?

Sent from my SPH-L720 using Tapatalk

I have a bunch of rear seats all in decent condition. I don't have any wheel spacers really, just the subframe spacers.

[andisan]

I'm in need of a passenger manual window track, 89-93 240sx, the plastic clips broke on mine so it's stuck, let me know
I'm in 93436 I will need it shipped

Thanks

[Slows14kouki]

Ill take that throttle body ka24de

[DJPimpFlex]

Ill take that throttle body ka24de

PM replied to. List updated.

[qwerth]

just Pm'd you with some questions!

[240riot]

Do you have a s13 sr20 alternator? And where in Cali are you located?


Sent from my iPhone using Tapatalk

[DJPimpFlex]

Do you have a s13 sr20 alternator? And where in Cali are you located?


Sent from my iPhone using Tapatalk

I'm in Norcal, Petaluma, North of SF. I only have DOHC KA Alternators but they actually work on SR if you swap the pulley and drill out one of the holes a little bit.

[Konster]

Any Vert parts?

[DJPimpFlex]

Any Vert parts?

Nah no vert stuff at all. What are you looking for specifically?

[Konster]

Looking for clean rear panels and two little trim pieces.

[DJ-of-E]

Do you have S13 interior as well?

Do you have that driver side fuse box door? I broke mines and need another ^_^

[DJPimpFlex]

Looking for clean rear panels and two little trim pieces.

I don't have that unfortunately.

Do you have S13 interior as well?

Do you have that driver side fuse box door? I broke mines and need another ^_^

I do have 2 of those, one black and one tan. I replied to your PM with pricing.

[integramandj]

s14 headlight switch with fog light switch


Sent from my iPhone using Tapatalk

[AmbientxNoise]

Hey, you got a full lock set and keys? Doors, glove box and a cylinder for a hatch ideally. Shipped to 23513.

[DJPimpFlex]

Hey, you got a full lock set and keys? Doors, glove box and a cylinder for a hatch ideally. Shipped to 23513.

I don't have a full matching set.

s14 headlight switch with fog light switch

Like the whole switch stock that goes on the steering shaft? I have that. Pm sent with pricing.

[AmbientxNoise]

What do you have matching? I'm only down a driver door so I might repin anyway.

[DJPimpFlex]

What do you have matching? I'm only down a driver door so I might repin anyway.

I don't have anything good really. I've got an ignition with key and a bunch of door handles with no keys.

[brndck]

Hey I'm wondering if you have a complete body wiring harness for a hatchback. Everything from the tail lights to the fuse boxes to the headlight connectors.

[240sexige]

Do you still have the PS/Accessory belt tensioner parts and the AC tensioner pulley and parts that'll fit my 95? (not sure if they changed anything about them through the years) If so and they are in good shape please let me know how much shipped to 35757.

[arlrat]

do you have a driver side knukle/spindle s13 if u do can u ship to NY 11901
text me 631-965-7291 Alex

[DJPimpFlex]

Hey I'm wondering if you have a complete body wiring harness for a hatchback. Everything from the tail lights to the fuse boxes to the headlight connectors.

PM Sent

Do you still have the PS/Accessory belt tensioner parts and the AC tensioner pulley and parts that'll fit my 95? (not sure if they changed anything about them through the years) If so and they are in good shape please let me know how much shipped to 35757.

I'll have to check on this when I get home. Possibly.

do you have a driver side knukle/spindle s13 if u do can u ship to NY 11901
text me 631-965-7291 Alex

I don't unfortunately.

[240sexige]

I'll have to check on this when I get home. Possibly.


Thanks in advance!!

[assassinx9]

do you have s13 driver side rear caliper and sohc manual speed sensor?

[DJPimpFlex]

do you have s13 driver side rear caliper and sohc manual speed sensor?

I do have the caliper, don't have the speed sensor. PM sent with pricing.

[DJPimpFlex]

Do you still have the PS/Accessory belt tensioner parts and the AC tensioner pulley and parts that'll fit my 95? (not sure if they changed anything about them through the years) If so and they are in good shape please let me know how much shipped to 35757.

I checked last night and I don't have one unfortunately.

[DJPimpFlex]

Bump! List updated

[OMFGeofffff]

Rear passenger lower control arm shipped to 55021?

[Legend1515]

http://imagizer.imageshack.us/v2/800x600q90/802/4wwz.jpg (https://imageshack.com/i/ma4wwzj)
http://imagizer.imageshack.us/v2/800x600q90/842/gt9p.jpg (https://imageshack.com/i/negt9pj)
http://imagizer.imageshack.us/v2/800x600q90/836/simv.jpg (https://imageshack.com/i/n8simvj)
http://imagizer.imageshack.us/v2/800x600q90/69/cekf.jpg (https://imageshack.com/i/1xcekfj)
http://imagizer.imageshack.us/v2/800x600q90/36/cch1.jpg (https://imageshack.com/i/10cch1j)


Updated the list 1-23-14. Lots of new parts added

(415) 724-0675

Wheels
BRAND NEW Rota Torque 18x9 +20 all around with NEW Federal 595 tires - $870

4 S13 SE Alloys, tires hold air - $125

Engine
SR Red Top Thermostat Housing - $25
S13 KA24DE Engine Harness - $100
KA24DE Starter - $40
KA24DE Alternator - $40
KA24DE PS pump - $40
KA24DE Maf - $35
KA24DE Coil - $20
KA24DE IACV - $65
KA24DE AC Compressor - $40
Q45 Maf - $50
Apexi Universal Filter - $20

Drivetrain
Kazama Motor mounts - $145
Good condition stock motor mounts - $30
Megan Racing Subframe Spacers - $30
S13 Subframe with SPL solid bushings, it's been gusseted and powdercoated as well - $200
S14 Rear Subframe - $85
S13 Rear Subframe - $85
SR20 Fidanza Flywheel (used but in good condition, 6k miles) - $250
5 Speed Transmission Crossmember - $50


Suspension
S14 Megan RUCA's - $100
4 Lug Hubs - $35 per pair, $60 for all 4
S13 Stock rear knuckles with Energy Suspension bushings already pressed in - $95
I have all S13 stock suspension so let me know what you need


Brakes
HUGE Rotors conversion for rear 5 lug S13/S14 with stock caliper adapters. Makes the ebrake lock easy - $165
Stock S13 Brake calipers - $25 each
Stock S13 4 Lug Rotors - $10 each
1 1/16 Z32 Master Cylinder with 3rd fitting already pressed in (ready for S13/S14) - $90


Interior
S13 DOHC Cluster - $50
S13 Steering Wheel Adapter - $45
S13 Clutch Pedal - $75
S13 5 Speed brake pedal - $55
S13 Black Manual Door Panels - $50
S13 Rear View Mirror - $15
S13 Center Console - $35
S13 Full Ebrake (handle back to calipers) - $40
S13 Sun Visors - $25
S13 Gray Carpet - $75
S13 Cluster Surround - $30

S14 Ebrake Handle - $30
S14 Sun Visors - $45
S14 Razo Shift Boot (Black with red stitching) - $40
S14 Zenki Black Face Gauge Cluster - $75
S14 AC Trim - $40
S14 Center Console - $50
S14 Glove Box - $40
S14 Ashtray - $15
S14 Confetti rear seats - $80

GForce Blue 4pt Harness - $75

Exterior
S13 Coupe Rear Bumper (have 2, 1 spray painted white, one charcoal grey) $35 each
S13 Hatch Rear Bumper (Have 2, 1 primer, one red) $35 each
S13 Fenders, black and decent condition - $150 (will not split)
S13 Popup Roof - $40
S13 Hatchback Fiberglass Rear Aero Bumper - $95
S13 Wingless Hatch - $70

S14 Zenki Passenger Fender - $75
S14 Passenger door - $75
S14 Sunroof Setup - $140 (I will part out the glass alone)



Misc
S13 Hood latch with cable - $25
S13 Upper Radiator mounting brackets - $15
S13 Windshield wiper motor - $10
S13 Gas Tank - $35
S13 SOHC Front Chassis harness with 2 fuse boxes - $100
S14 Front Chassis Harness - $150
S14 Steering Shaft - $40
S13 Gas Tank Door - $15
FasTrax Camber/Caster Gauge, works for 13"-18" wheels - $80


I have EVERYTHING so if you don't see it post/pm me. All stock parts are available. Shipping is also available on most parts.

(415) 724-0675

Ill buy the ash tray

Sent from my SPH-L710 using Tapatalk

[qwerth]

just responded from your pm earlier this week!

[CaliforniaMayhem]

Texted

Sent from my XT907 using Tapatalk

[DJPimpFlex]

Responded to both of you and updated the list.

[DJPimpFlex]

Bump this up. Moved a lot of stuff this weekend! Give me your dollhairs.

[Steo]

Bump great stuff ill send a pm later this week

[DJPimpFlex]

Bump!! Come get this stuff

[mizagyu]

http://imagizer.imageshack.us/v2/800x600q90/15/9dmw.jpg (https://imageshack.com/i/0f9dmwj)
http://imagizer.imageshack.us/v2/800x600q90/713/nh4f.jpg (https://imageshack.com/i/jtnh4fj)
http://imagizer.imageshack.us/v2/800x600q90/802/4wwz.jpg (https://imageshack.com/i/ma4wwzj)
http://imagizer.imageshack.us/v2/800x600q90/36/cch1.jpg (https://imageshack.com/i/10cch1j)
http://imagizer.imageshack.us/v2/800x600q90/38/rsnn.jpg (https://imageshack.com/i/12rsnnj)
http://imagizer.imageshack.us/v2/800x600q90/547/hppe.jpg (https://imageshack.com/i/f7hppej)
http://imagizer.imageshack.us/v2/800x600q90/837/07z7.jpg (https://imageshack.com/i/n907z7j)


Updated the list 1-30-14

(415) 724-0675

Wheels
BRAND NEW Rota Torque 18x9 +20 all around with NEW Federal 595 tires - $870

4 S13 SE Alloys, tires hold air - $125

Engine
SR Red Top Thermostat Housing - $25
KA24DE Starter - $40
KA24DE PS pump - $40
KA24DE Alternator - $40
KA24DE Coil - $20
KA24DE IACV - $65
KA24DE AC Compressor - $40
Q45 Maf - $50
Apexi Universal Filter - $20

Drivetrain
Kazama Motor mounts - $145
Megan Racing Subframe Spacers - $30
S13 Subframe with SPL solid bushings, it's been gusseted and powdercoated as well - $200
S14 Rear Subframe - $85
S13 Rear Subframe - $85
SR20 Fidanza Flywheel (used but in good condition, 6k miles) - $250
Exedy Stage 1 SR clutch - $125


Suspension
S13 Front Strut Tower Bar - $20
S14 Megan RUCA's - $100
4 Lug Hubs - $35 per pair, $60 for all 4
S13 Stock rear knuckles with Energy Suspension bushings already pressed in - $85
I have all S13 stock suspension so let me know what you need


Brakes
KSport Hydro Ebrake with Wilwood inline master - $120
Stock S13 Brake calipers - $25 each
Stock S13 4 Lug Rotors - $10 each
1 1/16 Z32 Master Cylinder with 3rd fitting already pressed in (ready for S13/S14) - $90


Interior
S13 DOHC Cluster - $50
S13 Cluster Surround - $35
S13 Steering Wheel Adapter (nardi pattern) - $45
S13 5 Speed brake pedal - $40
S13 Black Manual Door Panels - $35
S13 Rear View Mirror - $15
S13 Center Console - $35
S13 Sun Visors - $25
S13 Gray Carpet - $75


S14 Ebrake Handle - $30
S14 Razo Shift Boot (Black with red stitching) - $30
S14 Zenki Black Face Gauge Cluster - $75
S14 Glove Box - $40
S14 Confetti rear seats - $80

GForce Blue 4pt Harness - $75

Exterior
S13 Hatch Rear Bumper (Have 2, 1 primer, one red) $35 each
S13 Fenders, black and decent condition - $150 (will not split)
S13 Popup Roof - $40
S13 Hatchback Fiberglass Rear Aero Bumper - $95
S13 Wingless Hatch - $70

S14 Zenki Passenger Fender - $75
S14 Passenger door - $75
S14 Sunroof Setup - $140 (I will part out the glass alone)



Misc
S13 Headlight trim pieces - $60
S13 Hood latch with cable - $25
S13 Upper Radiator mounting brackets - $15
S13 Windshield wiper motor - $10
S13 Gas Tank - $35
S13 Gas Tank Door - $15
S13 SOHC Front Chassis harness with 2 fuse boxes - $100

S14 Front Chassis Harness - $150
S14 Steering Shaft - $40
S14 Radiator Overflow Reservoir - $35

Autometer oil pressure gauge - $40
Autometer Water Temp Gauge - $40
Autometer Volt Gauge - $40

I have EVERYTHING so if you don't see it post/pm me. All stock parts are available. Shipping is also available on most parts.

(415) 724-0675

Still got the s14 subframe and uprights? No links needed

Sent from my GT-I9500 using Tapatalk

[DJPimpFlex]

Still got the s14 subframe and uprights? No links needed

Sent from my GT-I9500 using Tapatalk

What "uprights"? I have the subframe.

[mizagyu]

The rear hub carrier assembly? Held to the subframe via control arms/links lol.

Sent from my GT-I9500 using Tapatalk

[DJPimpFlex]

The rear hub carrier assembly? Held to the subframe via control arms/links lol.

Sent from my GT-I9500 using Tapatalk

I've never heard of them called uprights. They are usually called rear knuckles. I do have the subframe available but no links or knuckles. I'm not willing to ship it though.

[mizagyu]

Ah, bummer.. Thanks anyways.

[DJPimpFlex]

BUmp!!!!!!!!!!!!!!!!!! List updated

[inspire]

Looking for an ecu and engine bay wiring harness. 5spd 91 coupe ka24de. Happen to have it?

[Derko]

pics of rear bumpers?

[LexSan]

do you happen to have s13 valve cover bolts?? lol

[DJPimpFlex]

Looking for an ecu and engine bay wiring harness. 5spd 91 coupe ka24de. Happen to have it?

I don't have these unfortunately.

pics of rear bumpers?

http://imagizer.imageshack.us/v2/xq90/837/wrfc.jpg (https://imageshack.com/i/n9wrfcj)

do you happen to have s13 valve cover bolts?? lol

I don't unfortunately.

[MrClown]

im interested in the subframe with the spl bushings

[DJPimpFlex]

im interested in the subframe with the spl bushings

I don't want to ship it.

[Steo]

Payment send thanks��

[ZakS13]

PM'ed you.

[DJPimpFlex]

Come buy this stuff!!!

[89coupe666]

Any open diffs? Or welded diffs or any 4.36 diffs ? Pm me with what you have. Would need shipped to 55605

[DJPimpFlex]

Any open diffs? Or welded diffs or any 4.36 diffs ? Pm me with what you have. Would need shipped to 55605

Nothing like that unfortunately.

[LikWid]

Is that carpet from a coupe? I wonder how much it would be to ship it.

[DJPimpFlex]

Is that carpet from a coupe? I wonder how much it would be to ship it.

Coupe and hatch carpet is the same. PM sent.

[ImKing]

You have a pm sir.

[qwerth]

Happen to have that bride seat still?

[BubbaKIV]

250 for the z32 calipers

[DJPimpFlex]

250 for the z32 calipers

plus shipping and you have a deal. They are heavy as hell though.

[Philthese93]

The title reads parting out 4 s13s. Do you have any 89-90 shells by chance?