gktech s13 throttle pully...need picture installed

[joe3180]

Can someone please post a picture of this gktech throttle pully installed? For whatever reason we cant figure out how it gets installed. Every position we have tried make the throttle cable either sit too far forward or at some weird high angle or just wont go thru the guide. Thanks in advance.

[Fuego]

I know this is impossible to do so I will help you out. (http://lmgtfy.com/?q=gktech+throttle+pully+installed[b)

[joe3180]

now show me the picture asshole cuz I sure didn't fine one.

[Fuego]

Literally the second link down, asshole.

[joe3180]

S13 and S14/15 are not the same thing.

[Kingtal0n]

wtf is a gktech throttle body and why did you remove the stock one?

The stock TB is good for over 400 real world horsepower. You exceed that then your option is often a Q45 TB.

Better to use an OEM part than something... foreign aftermarket. I've used the OEM KA24DE TB on many a 400HP sr20.


And now I see its a pulley of some kind. Nevertheless- why remove the stock pulley? It broke? those throttle bodies are cheap enough you could have a pile of them on the floor next to you for $50

[joe3180]

Just the pulley. Not the throttle body.

[Noobles]

Installed pics.

http://i586.photobucket.com/albums/ss305/Noobles180/gktechthrottle_zps8bcd6f75.jpg

http://i586.photobucket.com/albums/ss305/Noobles180/engine_zpsf68957f9.jpg

[Mikester]

It's a cool piece aesthetically and it performs as advertised, but the access points to get the springs/spacers in there correctly leave a bit to be desired in the way of ease of installation. Not hard, just tedious. Once in, it's pretty cool!

BTW Noobles, I like your garage carpeting :)

[Noobles]

Haha cheers Mike :)

[sleepyS14se]

will it fit a ka24de?

[Mikester]

will it fit a ka24de?

Anything will fit with the right amount of determination ;)

However, on an NA KA24DE, this mod would not really be as effective.

[sleepyS14se]

^ thats what i was thinking....

[Kingtal0n]

I usually use a stock KA throttle body because I need cruise control.


That aluminum sheet metal covering the air filter- priceless. Good job.

Now just get a proper PCV going. :bigok:

[Noobles]

I usually use a stock KA throttle body because I need cruise control.


That aluminum sheet metal covering the air filter- priceless. Good job.

Now just get a proper PCV going. :bigok:

Yep nearly done :)