Zenki build

[S13project]

Been running S13s for a few years. Figured it was time for a change.

Purchased a 95 S14 SE non ABS and no sunroof
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20S14/bf8248c6bcb811e2ad8422000a1fa8e9_7.jpg

fixed a couple minor issues that would drive me crazy later if left alone
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20S14/IMG_0220.jpg
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20S14/IMG_0221.jpg
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20S14/PaintedSubframe.jpg

things were done
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20S14/IMG_0400.jpg
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20S14/Rsuspensionbrakes.jpg
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20S14/IMG_1020.jpg

updated the headlights and threw on aero
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20S14/IMG_0575.jpg
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20S14/IMG_0534.jpg
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20S14/IMG_0610.jpg
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20S14/IMG_0607.jpg

now messing with this
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20S14/IMG_0694.jpg

this
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20S14/IMG_0693.jpg

and fitting these
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20S14/IMG_0705.jpg

currently waiting on parts to finish up fitting the motor so I can get the shifter extension done and driveshaft made.

[S13project]

finished up the front suspension bits
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20S14/IMG_0983.jpg

no more KA
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20S14/IMG_0728.jpg

1.5JZ test fit with Excessive brackets and Drift Freaq motor mounts
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20S14/IMG_0858.jpg

after a good bit of waiting, the Quiksilver twin scroll manifold arrived
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20S14/IMG_1176.jpg

[S13project]

changing out the 17" original step lips Equips (not original specs at all tho)
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20S14/IMG_0703.jpg

to 18" meisters
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20S14/IMG_0736.jpg

also. am trying to find a pair of USDM zenki headlights with good mounting points (that are under 200) so I can build another set of the chaser retrofit headlights and make a thread on the process.

for now here's the couple pics i did take:

all you need from the zenki headlight
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20S14/IMG_0577.jpg

shaved down chaser headlight
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20S14/IMG_0578.jpg

chaser guts in the zenki frame
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20S14/IMG_0579.jpg

after everything has completely cured
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20S14/IMG_0575.jpg

[juvi22003]

Off to very nice and clean start....did buy those headlights or fully customized? Looking for a set of headlights myself....

[Scherz Daddy]

I love that front bumper, which one is it?

[S13project]

Off to very nice and clean start....did buy those headlights or fully customized? Looking for a set of headlights myself....

Its definitely a much slower build than I was planning, but it always come down to parts availability. I retrofitted the headlights with the help of a friend

I love that front bumper, which one is it?

Its the GT Rodeo Special (Rocket Bunny) bumper

[S13project]

one year later.....and nothing much has gotten done:

tubbed the front fenders
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20S14/IMG_2339.jpg

thought this was the way it was going to go.....
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20S14/f1643ec1-8a94-4bea-b146-25c4a99a466c.png

sold the built 1.5JZ and picked up these, all very similar specs, to fit with the ZG flares
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20S14/IMG_3207.jpg

....then this happened
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20S14/IMG_3691.jpg

now need to sell all those wheels and pick up ones that will fit the TRA V2 flares without needing 30mm spacers.

[blksylv]

Subscribed. Loving the build. Any pics of how much did you shave off of the back of the zenki housing?

[STL240SXDRIFT]

sold the built 1.5JZ and picked up these, all very similar specs, to fit with the ZG flares
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20S14/IMG_3207.jpg

http://www.gifsforum.com/images/gif/omg/grand/48569325_omg_reaction_gif.gif

[S13project]

Subscribed. Loving the build. Any pics of how much did you shave off of the back of the zenki housing?

behind the strut tower? I just beat the crap out of it. lower firewall inside wheel well? I just beat the crap out of it.

If not those then I am not sure what you are asking about.

[blksylv]

Sorry my bad lol, I meant the zenki headlight housings for the chaser retrofit and do you have any pics of the back of the headlights after completion? Also how is the light distribution at night with them?

[S13project]

This is the housing without the plastic or chrome lenses:
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20S14/IMG_0536.jpg

This is all that was needed for the retrofit:
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20S14/IMG_0577.jpg

Chaser headlight housing trimmed down to necessity:
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20S14/IMG_0578.jpg
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20S14/IMG_0580.jpg

Glued and sealed
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20S14/IMG_0575.jpg

Honestly the light output isnt terrible, but I would not want to be driving in the mountains at night with any rain or fog. The light is there its just not directed correctly. If/when I build another set I will more than likely retrofit a LHD correct projector setup into the chaser housings.

[blksylv]

Thanks for the info. I was considering this as an option if I don't retrofit my current headlights. I have jdm housings with clear lenses at the moment and the output is terrible lol. The chaser retrofit with proper projectors does sound interesting though.

[Drifting Kalamari]

Omfg, if I still had a Zenki front end I'd LOVE to hav those headlights! They're gorgeous!!!

[joshfng]

Love it! Where did you find that v2 widebody? I can only seem to locate v1

[Apex Eight]

Holy shit that kit makes those wheels look like 15s lol. Sick build. Being from Georgia, I've heard about the great work you guys do up at Koru Works. Subbed.

[S13project]

Love it! Where did you find that v2 widebody? I can only seem to locate v1

Got it through my shop KoruWorks. If you want one let us know. We do not keep them in stock so it will take some time once ordered.

Holy shit that kit makes those wheels look like 15s lol. Sick build. Being from Georgia, I've heard about the great work you guys do up at Koru Works. Subbed.

Yea the V2 completely engulfs 18s. Almost considering 19s, but the cost per tire is damn insane. Maybe a set of 19s just for rollers, but stick with 18s for drifting. Always nice to hear we are getting love from the Atlanta community.

[Wheel Lounge]

can't wait to see it done with the widebody! awesome build!

[S13project]

http://i12.photobucket.com/albums/a247/gc8sti/Tha%20S14/IMG_4497.jpg
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20S14/IMG_4496.jpg
progress is near turtle pace

[Apex Eight]

Even unfinished it looks badass. What color are you guys thinking of going with?

[S13project]

Red on red with fancy color wheels

[Stein180sx]

TEAM BLUE or BUST!!

[S13project]

Stein the s14 won't be part of the TeamRowdy blue, but the cressy will be

[Fries]

Are those s13 fender flares? Could you get a better shot of the side/ rear quarter?

[tougefactory]

Awesome Build!
Loving the Trakyoto kit on this.

[S13project]

yes they were meant for the s13 hatch. they somewhat fit the s14 since not that big of a difference.

thanks tougefactory!

[Henkkuli]

Had to register on forum 'cause I'm in love with your RB build :drool:
Has there been any progress lately ? :)

[S13project]

Currently building up the motor and making sure everything is nice and fresh while waiting on HKS cams. Picked up some new wheels that should fit the flares better. 18x11.5-30 rears. Still waiting on the fronts which will be 18x9.5-35.

One of the rears
http://i12.photobucket.com/albums/a247/gc8sti/Wheels/10302471_10153013929756154_8838653598845001281_n.j pg

[Apex Eight]

horry shet

[Ryanks14]

I can't wait to see this car finished. I absolutely love the S13 flares and skirts. How much "massaging" was needed to fit them to the S14?

Props to you sir!

[S13project]

The s13 flares actually sit pretty close. there are a couple of small areas where the curvatures are different enough to try and trim/cut/rebuild to fit better. the main area of issue is the gas door cut out. until that's fixed i can't even open the s14 door

[S13project]

HKS cams finally arrived. Only took about 6 months..........hated that waiting game. Motor should be done very soon. Then wiring and a bit more metal work. Holding out for something special.......but will continue on until I either get denied or it comes through.

second set of wheels are almost done. pic of the rears
http://i12.photobucket.com/albums/a247/gc8sti/Wheels/getPart-1.jpg

VRwheels always comes through with quality work

[Reece]

Jaw dropped when I saw those wheels...

[lowerclass]

oh wowzers this is something interesting!!

[lowerclass]

I bought a bezel and an entire headlight from japan.. I'm going to see if I can't just cut down the bezels, but them in, and then do a retrofit maybe maybe. This thread gives me so many inspirations dude!

[IIIXziuR]

That wheels collection is something magical. Respect!

[S13project]

this build is literally at a stand still until the new aero arrives. until then........

http://i12.photobucket.com/albums/a247/gc8sti/Tha%20S14/IMG_5146.jpg
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20S14/IMG_5463.jpg

http://i12.photobucket.com/albums/a247/gc8sti/Wheels/IMG_6448.jpg
the VS mesh in the middle is having the lips re-coated to match the LM and rear VS lips.

[Counteract]

The s13 flares actually sit pretty close. there are a couple of small areas where the curvatures are different enough to try and trim/cut/rebuild to fit better. the main area of issue is the gas door cut out. until that's fixed i can't even open the s14 door

Rip that shit out, fibreglass it up and do this:
http://www.speedhunters.com/wp-content/uploads/2011/05/IMG_1019_1j6Z_1.jpg

The V2 kit looks amazing on this. My friend is currently fitting the V1 to his JDM Kouki kitted S14A. He found the rear arches a struggle to fit nicely.

[Apex Eight]

h o r y s h e t

[S13project]

The V2 kit looks amazing on this. My friend is currently fitting the V1 to his JDM Kouki kitted S14A. He found the rear arches a struggle to fit nicely.

For some reason I thought the V1 rear bits would have lined up better.......as I type this I realize they were both to fit the same car so why would they sit any different when it comes to the fuel door.

New aero is for s14 so no worries about fitment issues anymore. Trying to stay patient until it arrives and I can start test fitting it.

[S13project]

engine bay is ready for the motor
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20S14/IMG_6941.jpg

and of course thats when the new aero arrives
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20S14/IMG_6862.jpg

once the boss is fitted, the motor can get dropped in so piping and fuel can be finalized plus wiring. then out for paint. words make it sound so easy......wish it was, but then it wouldnt be half as fun.

[zombiewolf513]

Bay looks dope

[2muchboost]

This build! And this BBS's! My friend you have something amazing going on here keep it up.

[S13project]

http://i12.photobucket.com/albums/a247/gc8sti/Tha%20S14/IMG_7028.jpg
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20S14/IMG_7027.jpg
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20S14/IMG_7399.jpg
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20S14/IMG_7402.jpg

Super RSs wont be staying on the car much longer. They are only 9.5-6 and 11.5-6. Once the new wheels are out of powdercoating and in my hands they will get mounted up. 9.5-30 and 11.5-30 should fit spot on.

[_tony_s13]

damn!!!!! looks amazing man

[drewr4411]

Cant hate on it. The front end looks great on that car man.

[tricky_ab]

http://www.abload.de/img/animation1dfg2zq7g.gif

I wasn't expecting this when I opened this thread!

[S13project]

Thanks guys. I'm glad to have finally settled on the aero. I really liked the other ideas, but it just felt like they weren't finished versions of what I was after. Still have a good bit of work to do before it will be ready to shakedown......should be rather fun once it is.

[S13project]

and they fit pretty damn well

http://i12.photobucket.com/albums/a247/gc8sti/Tha%20S14/IMG_7649.jpg

http://i12.photobucket.com/albums/a247/gc8sti/Tha%20S14/IMG_7651.jpg

[flores.rudy22]

Super clean


Sent from my iPhone using Tapatalk

[Ronald_Mcdonald]

http://i12.photobucket.com/albums/a247/gc8sti/Tha%20S14/IMG_6941.jpg



More info on this...?

Also, judging by the test fit of the wheels, this is going to look great.

[drewr4411]

more updates what's going on now?

[S13project]

That is the HeatShield Lava fiber cloth with adhesive backing. Comes in two different thicknesses. Was pretty easy to manipulate into and over the firewall.

As for whats going on now
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20S14/IMG_8095.jpg
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20S14/IMG_8093.jpg

Exhaust manifold wrapped with HeatShield Lava fiber. Got the DM exhaust manifold studs installed. Very time consuming as these are much beefier and not the "one time use" like the OEM ones. Plus they are shorter which makes mounting aftermarket manifolds a good bit easier. Slowly putting the motor back together. Waiting on shims for the exhaust side to finish up the cam install. Will probably throw the motor in before thats done since still easy to do on car.

Once the motor is in its off to get custom wiring harness since I don't know exactly which model/year the motor came out of. If I knew I would hit up Panic Wire as he does some damn good work. Wish Wiring Specialties did the 1jzVVTi but again would need to know model/year for accurate harness.

[S13project]

Still need to clean up the intake manifold and get the valve covers powdercoated......so much left to do.

[Cheaptalon]

This really took a turn from page one. I am more of a factory body guy, but I'll reserve my judgement for once the kit gets painted. Work looks top notch!

[S13project]

Been a minute since last update. Went off for an out of country adventure then after returning home there was a family emergency. Been a busy January.

Intake manifold after hours of scrubbing and cleaning
http://i12.photobucket.com/albums/a247/gc8sti/Mobile%20Uploads/2016-01/DE3A91CB-E069-4684-A4BE-6A6D84D4E639.jpg

And the new rear spoiler showed up
http://i12.photobucket.com/albums/a247/gc8sti/Mobile%20Uploads/2015-12/8E68B563-8389-4B23-BA56-933F381498D7.jpg

[Heywood Jablomie]

If you haven't already sent for a wiring harness I'd hit up Mark Panic, dude knows his shit probably better than anyone in the business when it comes to wiring jdm motors, he'll know what the motor is out of. He did my harness for my late model vvti 1j swap and its perfect.

[S13project]

PanicWire is amazing. He did the wiring for my 1JZ VVTi MX83 and a friends 1.5JZ SC300. Perfect PnP from day one. Mark is very good at what he does.

[EnvisionMore]

Amazing build so far. More updates when you fit the motor in!

[Heywood Jablomie]

PanicWire is amazing. He did the wiring for my 1JZ VVTi MX83 and a friends 1.5JZ SC300. Perfect PnP from day one. Mark is very good at what he does.

Nice, still have it? Traded my s13 a while back and built a 6 speed 1j x8, sedans are the shit.
Anyways, this car is gonna be rad, diggin the heat shield cloth on the firewall and the chaser lights. Keep up the good work!

[forgotten]

that rear wing looks dope !!

[STEEZxIT]

that headlight set up looks amazing. i've been interested in that ever since that purple-y-grey one popped up in the zenki thread. did you ever get started on a diy thread for them?

[S13project]

that headlight set up looks amazing. i've been interested in that ever since that purple-y-grey one popped up in the zenki thread. did you ever get started on a diy thread for them?

do a proper DIY I would have to build another set and find a friend to take video/photographs. I tried to stop and get pics during the process, but some of it got so tedious that I just wanted to get through it and forgot to take a couple pics during all the sanding/trimming.

[S13project]

Nice, still have it? Traded my s13 a while back and built a 6 speed 1j x8, sedans are the shit.
Anyways, this car is gonna be rad, diggin the heat shield cloth on the firewall and the chaser lights. Keep up the good work!

I do. Just got it back from paint not too long ago.
http://i12.photobucket.com/albums/a247/gc8sti/MX83/IMG_9166.jpg
Refreshing all the rear bushings to poly while waiting on new 1.5 way to arrive.

[S13project]

Been busy with the cressida and so the s14 has sat neglected......

Debating with/without roof spoiler. If it sat flush and the hardware wasn't as big as it could be I would consider making new brackets.
http://i12.photobucket.com/albums/a247/gc8sti/MX83/IMG_9418.jpg
http://i12.photobucket.com/albums/a247/gc8sti/MX83/IMG_9622.jpg

Dropped rear subframe to yank out factory bits in favor of poly. Easiest bushings I've ever dealt with. Also had subframe reinforcement plate welded in to beef up diff mounting points for the 1.5way ATS. New rear upper arms with fresh balljoints and poly bushings. Same with front LCAs, fresh ball joints and poly bushings. Other than swaybar bushings, everything is either poly or heim.
http://i12.photobucket.com/albums/a247/gc8sti/MX83/IMG_9620.jpg

Took the cressy out for it's shakedown last weekend. Other than needing some suspension adjustments it was a blast to drift. Even got to toss it around with all seats occupied. Was a bit of work but still fun.

BxTmnYMbPjA
0QxIOrOgn-w

[AscendaShogun]

What ever happened to this? :(

Also, want to get that chaser headlight build. i understand how hard it would be but fuck man.

[S13project]

The S14 is a side project and so it gets pushed aside most of the time. Sent valve covers out for powdercoating and am happy they are now a color rather than raw. Got front of motor back together and then tossed it into the bay to check fit with the tubs and start looking at how to run piping, fuel, and coolant.

http://i12.photobucket.com/albums/a247/gc8sti/Tha%20S14/IMG_0369.jpg
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20S14/IMG_0993.jpg
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20S14/IMG_0996.jpg

[S13project]

One year later.......still getting pushed around.

http://i12.photobucket.com/albums/a247/gc8sti/Tha%20S14/DSC05274.jpg

Have been distracted by a new project (was supposed to just be a fun car to cruise around in but thats just not working out)

Purchased
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20RHD%20S13/IMG_2680.jpg

Immediately started cleaning it up. Hicas pulled out and tossed. Fresh non-hicas subframe and full suspension upgrade installed

http://i12.photobucket.com/albums/a247/gc8sti/Tha%20RHD%20S13/IMG_5247.jpg
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20RHD%20S13/IMG_5131.jpg
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20RHD%20S13/IMG_5246.jpg
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20RHD%20S13/IMG_5251.jpg

Then to the interior
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20RHD%20S13/IMG_0028.jpg
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20RHD%20S13/IMG_0654.jpg
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20RHD%20S13/IMG_1504.jpg

Even snagged fresh weather stripping/moulding
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20RHD%20S13/IMG_1560.jpg

Couldn't leave the exterior completely stock
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20RHD%20S13/IMG_0932.jpg
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20RHD%20S13/IMG_1508.jpg

Just picked up this sweet 2.5" RS*R NA exhaust to play nice with an RS*R header I've been sitting on for a couple months
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20RHD%20S13/IMG_1791.jpg

Also changing up the front wheels
http://i12.photobucket.com/albums/a247/gc8sti/Tha%20RHD%20S13/IMG_1792.jpg

[DJTTon]

Whered you grab the weatherstripping from? Nissan parts store?

[S13project]

Whered you grab the weatherstripping from? Nissan parts store?

Some from courtesy parts nissan, some from ebay, and some from YAJ. Never stop searching. Found a few items for the S14 as well. Front and rear glass mouldings so can be all fresh after paint.

[chetacheese]

Good lawd. Nice S collection with so much care. No matter how long, still an update. Fux yasss.

[rawgarage]

damn what an update

[S13project]

Thanks guys. First S13 was budget that eventually got all the ebay/rep parts replaced over time with proper quality stuff. So when I started the S14 I figured just go for the end game from the start.........much bigger undertaking than I originally imagined. The Silvia was supposed to be basic build, that quickly became slowly building up my dream S13. Have an S14 SR that is getting refreshed and has DOC bottom mount and HKS GT3 RS turbo to bolt on once it's ready. Might stay NA S13 SR or toss the S14 SR20DET in later. Gonna enjoy the NA life for a bit and see if it sticks.

[S13project]

S14 update......no more 1JZ VVTi. Friend was in need and my s14 was no where near completion so sold it off. Sat no motor for a minute, thought about just tossing in an SR and move forward. Then friend hits me with "hey I got an LS2 that needs a home". Couldnt say no to the price so have given in to a V8 and putting it in a Boss car....yea real original. Oh well get to find out what LS is all about can always change it up later.

https://live.staticflickr.com/65535/49126008512_a5e22b3faf_b.jpg

Initial test fit is good. Time to beat the crap out of the trans tunnel and start building fuel lines

[EFITTZY]

I enjoy fallowing the constant evolution. Absolutely love your Silvia man, can we get some moar pics? :yum:

[S13project]

I enjoy fallowing the constant evolution. Absolutely love your Silvia man, can we get some moar pics? :yum:

The s14 is back on the sidelines again......nothing new there unfortunately. Currently finishing up s14 SR motor build for the s13 silvia. Once thats in and running will turn attention back to the s14 and getting all the plumbing done for the LS to play nice with the fuel, coolant, and heater......a/c will have to wait until everything else is sorted and running first.

[S13project]

Nearly 2 years and while a handful go things have been done to the car, most of them are out of sight. ECU is mounted and most of interior has been put back making sure I didn't beat the trans tunnel too much to make way for the T56. Still need to create a bracket for the GTO pedal and other little things for the interior. As for engine bay I can't leave things well enough alone so changed up the valve covers a bit.

https://hosting.photobucket.com/images/a247/gc8sti/IMG_8344.jpg?width=1920&height=1080&fit=bounds

2 years and one photo. Will be nice to finish up the other projects (and sell off one of them as well) then put full attention on finishing up the S14. 2022 maybe