Rb25det to s13 spedo help

[Ryan5]

I was wondering if you guys could help me out quick. My rb25det S2 is out of my s13 for engine bay paint and some other things. Since the tranny is out i figured i would get my spedo to work. Its a DOHC cluster. I have a z32 speed sensor coming in the mail any day now. I know i have to take the gear off off the rb sensor and put it on the z32 sensor and it should bolt back in. I dont have the conector from the KA harness so i figured i would just cut the plug off the z32 and run my own wires. My question is where exactly would the wires be ran? There are obv 2 wires off the speed sensor from my research i think 1 wire goes to the cluster first then to the ecu maybe? I dont know why but its just been bugging me that i cant figure this out . Thanks so much everybody much appreciated!

[Ryan5]

Just bumping this to the top before i go to bed. I would love to get the wires run tomorow. I know this is an odd way of getting the spedo to work but sombody has too have done this before. Again thanks so much to anyone willing to help.