PDA

View Full Version : 1995 ka24de high idle


chriz_89
01-04-2014, 05:33 PM
I have a couple questions about what can cause a high idle. My car runs at about 1500-2000 rpm. when I bought it the car whould idle at 1500 but the RPM's would drop when I would slow down. I noticed that the throttle position screw was almost off. I fixed that so now rpms dont drop but now how do I fix the idle issue? Would that be a timing issue? Can I reset the tps? Any help would be greatly appreciated

bad dog
01-05-2014, 03:04 PM
tough problem , if it were me i would remove the throttle body and make sure the gasket is good.

then check the throttle cable and make sure it moves ok , you could even spray some wd40 down the cable , also on the return spring and fitting .

while the throttle body is off check the tps , making sure it is clean inside , put a ohm meter on the pins and make sure it is a smooth resistance as it is worked.

if the above is good try resetting the ecm .

if all the above is good make sure the timing at idle is 20 degrees .

also try spraying around the intake manifold and throttle body with brake cleaner or wd40 and see if the idle changes.

fufanu180
01-05-2014, 03:13 PM
I'd check and clean the iacv. And adjust accordingly once put back together.


CenTex240

chriz_89
01-05-2014, 03:45 PM
I clean the iacv. The iacv screw is completely closed and still idles high.

trikk
12-07-2014, 06:39 PM
did you get this fixed?